Sun Microsystems, Inc.
spacerspacer
spacer   www.sun.com docs.sun.com | | |  
spacer
black dot
   
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
    
 
Kernel Functions for Driversddi_mem_rep_get8(9F)


NAME

 ddi_mem_rep_get8, ddi_mem_rep_get16, ddi_mem_rep_get32, ddi_mem_rep_get64, ddi_mem_rep_getw, ddi_mem_rep_getl, ddi_mem_rep_getll, ddi_mem_rep_getb - read multiple data from mapped device in the memory space or allocated DMA memory

SYNOPSIS

 
#include <sys/ddi.h> 
#include <sys/sunddi.h>
void ddi_mem_rep_get8(ddi_acc_handle_t handle, uint8_t *host_addr, uint8_t *dev_addr, size_t repcount, uint_t flags);
 void ddi_mem_rep_get16(ddi_acc_handle_t handle, uint16_t *host_addr, uint16_t *dev_addr, size_t repcount, uint_t flags);
 void ddi_mem_rep_get32(ddi_acc_handle_t handle, uint32_t *host_addr, uint32_t *dev_addr, size_t repcount, uint_t flags);
 void ddi_mem_rep_get64(ddi_acc_handle_t handle, uint64_t *host_addr, uint64_t *dev_addr, size_t repcount, uint_t flags);

INTERFACE LEVEL

 

Solaris DDI specific (Solaris DDI).

PARAMETERS

 
handle
The data access handle returned from setup calls, such as ddi_regs_map_setup(9F).
host_addr
Base host address.
dev_addr
Base device address.
repcount
Number of data accesses to perform.
flags
Device address flags:
DDI_DEV_AUTOINCR
Automatically increment the device address, dev_addr, during data accesses.
DDI_DEV_NO_AUTOINCR
Do not advance the device address, dev_addr, during data accesses.

DESCRIPTION

 

These routines generate multiple reads from memory space or allocated DMA memory. repcount data is copied from the device address, dev_addr, in memory space to the host address, host_addr. For each input datum, the ddi_mem_rep_get8(), ddi_mem_rep_get16(), ddi_mem_rep_get32(), and ddi_mem_rep_get64() functions read 8 bits, 16 bits, 32 bits and 64 bits of data, respectively, from the device address, dev_addr. dev_addr and host_addr must be aligned to the datum boundary described by the function.

Each individual datum will automatically be translated to maintain a consistent view between the host and the device based on the encoded information in the data access handle. The translation may involve byte-swapping if the host and the device have incompatible endian characteristics.

When the flags argument is set to DDI_DEV_AUTOINCR, these functions will treat the device address, dev_addr, as a memory buffer location on the device and increments its address on the next input datum. However, when the flags argument is set to DDI_DEV_NO_AUTOINCR, the same device address will be used for every datum access. For example, this flag may be useful when reading from a data register.

CONTEXT

 

These functions can be called from user, kernel, or interrupt context.

SEE ALSO

 

ddi_mem_get8(9F), ddi_mem_put8(9F), ddi_mem_rep_put8(9F), ddi_regs_map_setup(9F), ddi_device_acc_attr(9S)

NOTES

 

The functions described in this manual page previously used symbolic names which specified their data access size; the function names have been changed so they now specify a fixed-width data size. See the following table for the new name equivalents:

Previous NameNew Name
ddi_mem_rep_getbddi_mem_rep_get8
ddi_mem_rep_getwddi_mem_rep_get16
ddi_mem_rep_getlddi_mem_rep_get32
ddi_mem_rep_getllddi_mem_rep_get64

SunOS 5.9Go To TopLast Changed 28 Aug 1996

 
      
      
Copyright 2002 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.