Sun Microsystems, Inc.
spacerspacer
spacer   www.sun.com docs.sun.com | | |  
spacer
black dot
   
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
    
 
User Commandspkgmk(1)


NAME

 pkgmk - produce an installable package

SYNOPSIS

 pkgmk [-o] [-a arch] [-b base_src_dir] [-d device] [-f prototype] [-l limit] [-p pstamp] [-r root_path] [-v version] [variable=value ...] [pkginst]

DESCRIPTION

 

The pkgmk utility produces an installable package to be used as input to the pkgadd(1M) command. The package contents will be in directory structure format.

The command uses the package prototype(4) file as input and creates a pkgmap(4) file. The contents for each entry in the prototype file is copied to the appropriate output location. Information concerning the contents (checksum, file size, modification date) is computed and stored in the pkgmap file, along with attribute information specified in the prototype file.

pkgmk searches for the files listed in the prototype(4) file as described in the following conditions. Note: If a prototype file contains the explicit location of the file to include in the package, then the following search explanations do not apply.

  1. If neither -b nor -r options are specified, the file name component of each file path listed in the prototype(4) file is expected to be found in the same directory as the prototype(4) file
  2. If -b is specified as a relative path (without a leading "/"), then base_src_dir is prepended to the relative file paths from the prototype(4) file. The resulting path is searched for in the root_path directories. If a root_path is not specified, it defaults to "/".
  3. If -b is specified as an absolute path (with a leading "/"), then base_src_dir is prepended to the relative paths from the prototype(4) file and the result is the location of the file. root_path is not searched.
  4. If -r is specified, then full file paths are used from the prototype(4) file. Relative paths have base_src_dir prepended. If base_src_dir is not specified, it defaults to "". The resulting path is searched for in each directory of the root_path.

If you created your prototype file using "pkgproto a/relative/path" or "pkgproto a/relative/path=install/path", then you should use the -r root_path option to specify the location of a/relative/path so that pkgmk can correctly locate your source files.

OPTIONS

 

The following options are supported:

-a arch
Overrides the architecture information provided in the pkginfo(4) file with arch.
-b base_src_dir
Prepends the indicated base_src_dir to locate relocatable objects on the source machine. Use this option to search for all objects in the prototype file. pkgmk expects to find the objects in /base_src_dir or to locate the objects by use of the -b and -r options, respectively.
-d device
Creates the package on device. device can be an absolute directory pathname or the identifiers for a floppy disk or removable disk (for example, /dev/diskette). The default device is the installation spool directory (/var/spool/pkg).
-f prototype
Uses the file prototype as input to the command. The default prototype filename is [Pp]rototype.
-l limit
Specifies the maximum size in 512 byte blocks of the output device as limit. By default, if the output file is a directory or a mountable device, pkgmk will employ the df(1M) command to dynamically calculate the amount of available space on the output device. This option is useful in conjunction with pkgtrans(1) to create a package with a datastream format.
-o
Overwrites the same instance; package instance will be overwritten if it already exists.
-p pstamp
Overrides the production stamp definition in the pkginfo(4) file with pstamp.
-r root_path
Uses the indicated root_path with the source pathname appended to locate objects on the source machine, using a comma (,) as the separator for the path elements. If this option is specified, look for the full destination path in each of the directories specified. If neither -b nor -r is specified, look for the leaf filename in the current directory.
-v version
Overrides the version information provided in the pkginfo(4) file with version.
variable=value
Places the indicated variable in the packaging environment. (See prototype(4) for definitions of variable specifications.)

OPERANDS

 

The following operand is supported:

pkginst
A package designation by its instance. An instance can be the package abbreviation or a specific instance (for example, inst.1 or inst.2). All instances of a package can be requested by inst.*. The asterisk character (*) is a special character to some shells and may need to be escaped. In the C-Shell, "*" must be surrounded by single quotes (') or preceded by a backslash (\).

EXIT STATUS

 

The following exit values are returned:

0
Successful completion.
>0
An error occurred.

ATTRIBUTES

 

See attributes(5) for descriptions of the following attributes:

ATTRIBUTE TYPEATTRIBUTE VALUE
AvailabilitySUNWcsu

SEE ALSO

 

pkgparam(1), pkgproto(1), pkgtrans(1), uname(1), df(1M), pkgadd(1M), pkginfo(4), pkgmap(4), prototype(4), attributes(5)

Application Packaging Developer's Guide

NOTES

 

Architecture information is provided on the command line with the -a option or in the prototype(4) file. If no architecture information is supplied, pkgmk uses the output of uname -m (see uname(1)).

Version information is provided on the command line with the -v option or in the pkginfo(4) file. If no version information is supplied, a default based on the current date will be provided.

Command line definitions for both architecture and version override the prototype(4) definitions.


SunOS 5.9Go To TopLast Changed 10 Jan 2001

 
      
      
Copyright 2002 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.