[rancid] HP 1920

[Andrea Venturoli]

Hello.

I've got a couple of HP 1920 switches I'd like Rancid to connect to.

However what I get is:
> /usr/local/libexec/rancid/clogin switch-ufficio.xxxxxxx
> switch-ufficio.xxxxxxx
> spawn telnet switch-ufficio.xxxxxxx
> Trying 192.168.110.10...
> Connected to switch-ufficio.xxxxxxx.
> Escape character is '^]'.
>
> ******************************************************************************
> * Copyright (c) 2010-2015 Hewlett-Packard Development Company, L.P.          *
> * Without the owner's prior written consent,                                 *
> * no decompiling or reverse-engineering shall be allowed.                    *
> ******************************************************************************
>
>
> Login authentication
>
>
> Username:admin
> Password:
> <Switch Ufficio xxxxxxx>enable
>                         ^
>  % Unrecognized command found at '^' position.
> <Switch Ufficio xxxxxxx>^C$

I believe the command "enable" has to be substituted with "_cmdline-mode 
on", but found no driver implementing this.

Does such a driver exist?
Anyone using this switch (or any similar one)?

  bye & Thanks
	av.