[rancid] HP Procurve 2810

[Brian Talley]

What does router.db look like?

2011/10/18 Gerhard Mourani <GMourani at prival.ca>

> Hello List,****
>
> ** **
>
> I’ve problem making Rancid (version 2.3.6) work with HP Procurve 2810
> switches. I’m able to connect to the switch correctly but the generated
> report is empty! If I check inside the log files, I can see the following:
> ****
>
> ** **
>
> 10.1.6.254: found unexpected command - "show system"****
>
> 10.1.6.254: missed cmd(s): show stack,write term****
>
> 10.1.6.254: End of run not found****
>
> ** **
>
> I use the following parameters in my *.cloginrc* file:****
>
> add autoenable  10.1.6.254          1****
>
> add user                10.1.6.254          myadmin****
>
> add password    10.1.6.254           mypassword      myenpassword****
>
> ** **
>
> Regards,****
>
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>



-- 
Brian Talley
b225ccc at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20111018/40745a34/attachment.html>