[rancid] Re: New device on .cloginrc

Remy Heiden remyheiden at gmail.com
Wed Jun 2 00:02:44 UTC 2010


Please check that the user and vty-password resemble the ones known to the
RADIUS server.

Regards,
Remy


On Fri, Apr 16, 2010 at 10:44 PM, Wagner Pereira <wpereira at pop-sp.rnp.br>wrote:

> Mickael,
>
> Yes, my .cloginrc is exactly like the below (omitting all the real
> values, obviously):
>
> add password 10.0.0.2 {vty passwd} {enable passwd}
> add user 10.0.0.2 user
> add userprompt 10.0.0.2 {"Username:"}
> add passprompt 10.0.0.2 {"Password:"}
> add method 10.0.0.2 {ssh} {telnet}
> add enableprompt 10.0.0.2 {"Password:"}
> add cyphertype 10.0.0.2 {3des}
>
> I already have another device rancid'ing perfectly, that means my
> .cloginrc lines are correctly written, since I declared it at the same
> way that the above.
>
> Hugs,
>
> --
>
> Wagner Pereira
>
> PoP-SP/RNP - Ponto de Presença da RNP em São Paulo
> CCE/USP - Centro de Computação Eletrônica da Universidade de São Paulo
> http://www.pop-sp.rnp.br
> Tel. (11) 3091-8901
>
>
> Em 16/4/2010 11:09, Mickael GARNIER escreveu:
> > Hi,
> >
> > do you have a 'add user' entry in your .cloginrc ?
> >
> > it should be like :
> > add user<host>  <user>
> > add password<host>  <password>  <enable-password>
> > add method<host>   ssh
> >
> > MG
> >
> >
> > Le 16/04/2010 15:46, Drikus Brits a écrit :
> >
> >> Hi,
> >>
> >> The root user is most likely because clogin is being executed as the
> root user, ie: you're logged in as root when you try to clogin into your
> router.
> >>
> >> Hope this helps,
> >>
> >> Drikus.
> >>
> >> -----Original Message-----
> >> From: rancid-discuss-bounces at shrubbery.net [mailto:
> rancid-discuss-bounces at shrubbery.net] On Behalf Of Wagner Pereira
> >> Sent: 16 April 2010 03:40 PM
> >> Cc: Rancid Mailing List
> >> Subject: [rancid] Re: New device on .cloginrc
> >>
> >> Ryan,
> >>
> >> When I try to connect to my device using /home/rancid/bin/clogin, this
> >> is what I get:
> >>
> >> --------------------
> >> spawn ssh -c 3des -x -l root 10.0.0.2
> >> root at 10.0.0.2's password:
> >> --------------------
> >>
> >> But, there is no root user written in my .cloginrc file.
> >>
> >> Where does this root user should come from?
> >>
> >> Hugs,
> >>
> >>
> >>
> > Post-scriptum La Poste
> >
> > Ce message est confidentiel. Sous reserve de tout accord conclu par
> > ecrit entre vous et La Poste, son contenu ne represente en aucun cas un
> > engagement de la part de La Poste. Toute publication, utilisation ou
> > diffusion, meme partielle, doit etre autorisee prealablement. Si vous
> > n'etes pas destinataire de ce message, merci d'en avertir immediatement
> > l'expediteur.
> >
> > _______________________________________________
> > Rancid-discuss mailing list
> > Rancid-discuss at shrubbery.net
> > http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
> >
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20100602/912e49e2/attachment.html 


More information about the Rancid-discuss mailing list