[rancid] Re: following problem

[Chris Gauthier]

This sounds more like a permissions issue since clogin isn't running the
commands rancid does.  Try just logging in without using clogin and see
if the same show commands work the same way.  If they do, it's not a
rancid problem at all (as I suspect).

Chris

-----Original Message-----
From: rancid-discuss-bounces at shrubbery.net
[mailto:rancid-discuss-bounces at shrubbery.net] On Behalf Of hina
Sent: Thursday, September 18, 2008 5:31 AM
To: rancid-discuss at shrubbery.net
Subject: [rancid] following problem


Hi guys, the configuration you gave to me, is working perfectly..
I can login with a user
and without enable it, try to start the backup ..
BUt ....  (of course, there is a "but" ) My network administrator gave
us a user (toto) who has the right (level 1/15) to do "show run" and
"show start".
so I try, by clogin to test it .. 
look by yourself :

$ clogin 10.0.10.XX
scape character is '^]'.


User Access Verification

Username: toto
Password: 
Sw_CCR_1>show start
 Using 3319 out of 32768 bytes
!
.....
.....
line con 0
 exec-timeout 0 0
line vty 0 4
 password XXXXXXXX
 login XOXO
line vty 5 15
 password XXXXXXXX
 login XIXI
!
end

Sw_CCR_1>show run
Building configuration...

Current configuration : 13 bytes
!
!
!
!
end

Sw_CCR_1>
The show run doesnt show any thing.. The show start is working.
What is missing ?  Which else binary are use during the show run. Can
you help me again ? 
Many thx
hina