|
Part Number
|
Format
|
Title
|
Description
|
|
n/a
|
|
Sun Blade 100 Workstation: Just the Facts (11/13/01) |
Provides reference information about positioning, target market,
system architecture, and ordering. |
| |
|
804-7016
|
|
Sun Blade 100 Hardware Documentation (CD insert) |
Provides instructions on how to install and view the HTML and
PDF versions of the Sun Blade 100 Service Manual (806-3416-10). It also
includes instructions on how to view the ShowMe How[tm] procedures. |
| |
|
806-3415
|
|
Sun Blade 100 Getting Started Guide |
Provides information about setting up the system, setting up
the preinstalled Solaris, getting started with the additional preinstalled
software, installing optional hardware, and troubleshooting. |
|
806-3416
|
|
Sun Blade 100 Service Manual |
Provides detailed procedures that describe the removal and
replacement of replaceable parts in the Sun Blade 100 computer system. The
service manual also includes information about the use and maintenance of
the system. |
|
816-1796
|
|
Sun Blade 100 Product Notes |
Contains late-breaking changes to Sun Blade 100 hardware,
software, and product documentation. These changes became known after
the product was released. Information includes Smart Card Reader
availability and related patch installations, Solaris 8 7/01, how to
set the default console display, how to reinstall Solaris 8 10/00 or
8 1/01, power management under 8 10/00 or 1/01, the Riser Board PCI
Card Guide, and numerous documentation changes. |
|
806-3417
|
|
Sun Blade 100 Product Notes |
Contains late-breaking information about changes to the Sun
Blade 100 hardware, software, and product documentation. These product notes
are a summary of the changes that became known after the product documentation
set was published. Information includes reinstalling Solaris and patches,
Sun 1394 camera support, FCC compliance classification, power management
features, setting the default console display, and corrections to the Sun
Blade 100 specifications. |
|
806-6637
|
|
Sun Blade 100 CD-ROM or DVD-ROM and Hard Disk Drive Installation
Guide |
Contains instructions for preparing the Sun Blade 100 system
for installation, and for installing a CD-ROM drive, DVD-ROM drive, and
hard disk drives in the Sun Blade 100 system. |
|
806-7793
|
|
Installing Solaris[tm] 8 10/00 or Solaris 8 1/01 Software |
Provides instructions on how to install Solaris 8 10/00 or
Solaris 8 1/01 by using the appropriate Operating Environment Installation
CDs (704-7610 or 704-7617, respectively). |
|
806-7837
|
|
Sun Blade 100 DIMM Installation Guide |
Provides instructions on how to install memory DIMMs into a
Sun Blade 100 system. |
| |
|
816-0737
|
|
Updating the Sun Blade 100 OpenBoot PROM Firmware |
Describe the procedures for setting the jumpers for an OpenBoot[tm] PROM
flash update. These procedures supplement the information in Step 1 of
section 8.5.2 of the Sun Blade Service Manual, 806-3416.
This document also describes how to reset the jumpers to their original
state and how to recover should a power interruption occur during the
OpenBoot update.
|
|
816-7660
|
|
Sun Blade 100 Motherboard Update and Sun PGX64 Patch Procedures |
Describes patch procedures required for the updated Sun Blade
100 system board, part number 375-3106. |
