Sun Microsystems, Inc.
spacer spacer
spacer   Sun System Handbook Home | Systems | Components | General Info | Search | Feedback 
spacer
black dot
 
black fade
 

Sun-4/E

501-8036
16MB ECC


Jumper Descriptions

BOARD SIZE
Sets the memory size of the board.
BOARD ID
Determines where a memory board is mapped into the 256MByte space allocated for memory expansion.
HI/LOW MEM
IN maps the memory board into the lowest 256MBytes of CPU type 0 space.
OUT maps the memory board in the address range between 256MBytes and 512MBytes.
1M/4M DRAM
Specifies 1MByte or 4Mbyte DRAM modules.

Jumper Settings

Memory Mapped into the Upper 256MBytes of Type 0 Address Space

BOARD
SIZE
BOARD
ID
HI/LOW
MEM
1/4MB
DRAM
ADDRESS RANGE
J0502 J0503 J0504 J0505 J0506 J0501 PHYSICAL ADDR RANGE
In In Out Out Out Out 0x1000000 - 0x10ffffff
In In Out In Out Out 0x11000000 - 0x11ffffff
In In In Out Out Out 0x12000000 - 0x12ffffff
In In In In Out Out 0x13000000 - 0x13ffffff

Memory Mapped into the Lower 256MBytes of Type 0 Address Space

BOARD
SIZE
BOARD
ID
HI/LOW
MEM
1/4MB
DRAM
ADDRESS RANGE
J0502 J0503 J0504 J0505 J0506 J0501 PHYSICAL ADDR RANGE
In In Out Out In Out 0x0000000 - 0x00ffffff
In In Out In In Out 0x01000000 - 0x01ffffff
In In In Out In Out 0x02000000 - 0x02ffffff
In In In In In Out 0x03000000 - 0x03ffffff

Notes

  1. For specific application dependent memory configurations refer to the SPARCengine 1E ECC Memory Card User's Manual, 800-8138.
  2. The default configuration for Hi Mem/Low Mem is J0506, OUT.

Reference

SPARCengine 1E ECC Memory Card User's Manual, 800-8138.


Last updated: December 2, 1996
WebToneWebToneWebToneWebTone
 Copyright 1994-2003 Sun Microsystems, Inc.,  901 San Antonio Road, Palo Alto, CA 94303 USA.  All rights reserved.
 Legal Terms Privacy Policy Feedback