> Mon, Oct 29, 2018 at 09:11:31PM +0000, Andrew Meyer:
> I am having some issues with rancid-3.2-2 on Amazon Linux 2.  I am trying to    
> get rancid to talk to my Juniper (junos) switches and SRX firewalls and am
> stuck.
>   
> Juniper EX2200
> Juniper SRX650
> 
> I have everything setup in my config.
> 
> router.db
> [rancid@rancid01 configs]$ cat ../router.db
> fw.location.example.net;juniper-srx;up
> sw1.location.example.net;junos;up
> sw2.location.example.net;juniper;up
> sw3.location.example.net;juniper;up
> sw4.location.example.net;juniper;up
> sw5.location.example.net;juniper;up
> aruba1.location.example.net;aruba;up
> aruba2.location.example.net;aruba;down
> [rancid@rancid01 configs]$
> 
> 
> Here is my logs.
> =====================================
> Getting missed routers: round 4.
> unknown router manufacturer for sw1.location.example.net: junos
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
type should be juniper

> sh: jlogin: command not found
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> fw.location.example.net: missed cmd(s): all commands
> fw.location.example.net: End of run not found
> sh: jlogin: command not found
> sw2.location.example.net: missed cmd(s): all commands
> sw2.location.example.net: End of run not found
> #
> #
> sh: clogin: command not found
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
I do not know what an Amazon Linux 2 is nor how you installed rancid,
but because you can run clogin from your shell prompt, i assume you are
not missing prerequisite packages.  so, you probably just have a deficient
PATH in your rancid.conf.

> aruba1.location.example.net: missed cmd(s): all commands
> aruba1.location.example.net: End of run not found
> !
> sh: jlogin: command not found
> sw3.location.example.net: missed cmd(s): all commands
> sw3.location.example.net: End of run not found
> sh: jlogin: command not found
> sw4.location.example.net: missed cmd(s): all commands
> sw4.location.example.net: End of run not found
> #
> #
> sh: jlogin: command not found
> sw5.location.example.net: missed cmd(s): all commands
> sw5.location.example.net: End of run not found
> #
>  
> On branch master
> Your branch is up-to-date with 'origin/master'.
> 
> nothing to commit, working tree clean
> Everything up-to-date
> 
> ending: Mon Oct 29 21:01:01 UTC 2018
> [rancid@rancid01 logs]$
> 
> When I run a clogin command on its own, I can ssh in just fine but there is a
> sligh issue with the terminal.  I suspect it's pagination.
> 
> 
> It has been while since having to do this so I'm not sure where I got this
> mixed up.
> 
> Any thoughts?
> 
> Regards,
> Andrew
> 
> 
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss@shrubbery.net
> http://www.shrubbery.net/mailman/listinfo/rancid-discuss

