<div dir="ltr"><p class="MsoNormal">Here is my output;</p><p class="MsoNormal"><br></p><p class="MsoNormal">I verified that some commands could not be run in the current IOS such as sh redundancy secondary.</p><p class="MsoNormal">
<br></p><p class="MsoNormal"><br></p><p class="MsoNormal">executing clogin -t 90 -c"show version;show redundancy
secondary;show idprom backplane;show install active;show env all;show rsp
chassis-info;show gsr chassis;show diag chassis-info;show boot;show
bootvar;show variables boot;show flash;dir /all nvram:;dir /all bootflash:;dir
/all slot0:;dir /all disk0:;dir /all slot1:;dir /all disk1:;dir /all slot2:;dir
/all disk2:;dir /all harddisk:;dir /all harddiska:;dir /all harddiskb:;dir /all
sup-bootdisk:;dir /all sup-bootflash:;dir /all sup-microcode:;dir /all slavenvram:;dir
/all slavebootflash:;dir /all slaveslot0:;dir /all slavedisk0:;dir /all
slaveslot1:;dir /all slavedisk1:;dir /all slaveslot2:;dir /all slavedisk2:;dir
/all slavesup-bootflash:;dir /all sec-nvram:;dir /all sec-bootflash:;dir /all
sec-slot0:;dir /all sec-disk0:;dir /all sec-slot1:;dir /all sec-disk1:;dir /all
sec-slot2:;dir /all sec-disk2:;show controllers;show controllers cbus;show
diagbus;show diag;show capture;show module;show spe version;show c7200;show
inventory raw;show vtp status;show vlan;show vlan-switch;show debug;show
shun;more system:running-config;show running-config view full;show
running-config;write term" 172.24.82.3</p>
<p class="MsoNormal">PROMPT MATCH: 4510_BB2#</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#show version</p>
<p class="MsoNormal"> In ShowVersion:
4510_BB2#show version</p>
<p class="MsoNormal">TYPE = 4500</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#show redundancy secondary</p>
<p class="MsoNormal"> In ShowRedundancy:
4510_BB2#show redundancy secondary</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#show idprom backplane</p>
<p class="MsoNormal"> In ShowIDprom:
4510_BB2#show idprom backplane</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#show install active</p>
<p class="MsoNormal"> In ShowInstallActive:
4510_BB2#show install active</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#show env all</p>
<p class="MsoNormal"> In ShowEnv:
4510_BB2#show env all</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#show rsp chassis-info</p>
<p class="MsoNormal"> In ShowRSP:
4510_BB2#show rsp chassis-info</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#show gsr chassis</p>
<p class="MsoNormal"> In ShowGSR: 4510_BB2#show
gsr chassis</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#show diag chassis-info</p>
<p class="MsoNormal"> In ShowGSR:
4510_BB2#show diag chassis-info</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#show boot</p>
<p class="MsoNormal"> In ShowBoot:
4510_BB2#show boot</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#show bootvar</p>
<p class="MsoNormal"> In ShowBoot:
4510_BB2#show bootvar</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#show variables boot</p>
<p class="MsoNormal"> In ShowBoot:
4510_BB2#show variables boot</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#show flash</p>
<p class="MsoNormal"> In ShowFlash:
4510_BB2#show flash</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all nvram:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all nvram:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all bootflash:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all bootflash:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all slot0:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all slot0:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all disk0:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all disk0:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all slot1:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all slot1:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all disk1:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all disk1:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all slot2:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all slot2:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all disk2:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all disk2:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all harddisk:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all harddisk:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all harddiska:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all harddiska:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all harddiskb:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all harddiskb:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all sup-bootdisk:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all sup-bootdisk:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all sup-bootflash:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all sup-bootflash:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all sup-microcode:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all sup-microcode:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all slavenvram:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all slavenvram:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all slavebootflash:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all slavebootflash:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all slaveslot0:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all slaveslot0:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all slavedisk0:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all slavedisk0:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all slaveslot1:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all slaveslot1:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all slavedisk1:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all slavedisk1:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all slaveslot2:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all slaveslot2:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all slavedisk2:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all slavedisk2:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all slavesup-bootflash:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all slavesup-bootflash:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all sec-nvram:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all sec-nvram:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all sec-bootflash:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all sec-bootflash:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all sec-slot0:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all sec-slot0:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all sec-disk0:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all sec-disk0:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all sec-slot1:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all sec-slot1:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all sec-disk1:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all sec-disk1:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all sec-slot2:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all sec-slot2:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#dir /all sec-disk2:</p>
<p class="MsoNormal"> In DirSlotN:
4510_BB2#dir /all sec-disk2:</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#show controllers</p>
<p class="MsoNormal"> In ShowContAll:
4510_BB2#show controllers</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#show controllers cbus</p>
<p class="MsoNormal"> In ShowContCbus:
4510_BB2#show controllers cbus</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#show diagbus</p>
<p class="MsoNormal"> In ShowDiagbus:
4510_BB2#show diagbus</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#show diag</p>
<p class="MsoNormal"> In ShowDiag:
4510_BB2#show diag</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#show capture</p>
<p class="MsoNormal"> In ShowCapture:
4510_BB2#show capture</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#show module</p>
<p class="MsoNormal"> In ShowModule:
4510_BB2#show module</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#show spe version</p>
<p class="MsoNormal"> In ShowSpeVersion:
4510_BB2#show spe version</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#show c7200</p>
<p class="MsoNormal"> In ShowC7200:
4510_BB2#show c7200</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#show inventory raw</p>
<p class="MsoNormal"> In ShowInventory:
4510_BB2#show inventory raw</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#show vtp status</p>
<p class="MsoNormal"> In ShowVTP:
4510_BB2#show vtp status</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#show vlan</p>
<p class="MsoNormal"> In ShowVLAN:
4510_BB2#show vlan</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#show vlan-switch</p>
<p class="MsoNormal"> In ShowVLAN:
4510_BB2#show vlan-switch</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#show debug</p>
<p class="MsoNormal"> In ShowDebug:
4510_BB2#show debug</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#show shun</p>
<p class="MsoNormal"> In ShowShun:
4510_BB2#show shun</p>
<p class="MsoNormal">HIT COMMAND:4510_BB2#more system:running-config</p>
<p class="MsoNormal"> In WriteTerm: 4510_BB2#more
system:running-config</p>
<p class="MsoNormal">write(spawn_id=1): broken pipe</p>
<p class="MsoNormal"> while executing</p>
<p class="MsoNormal">"send_user -- "$expect_out(buffer)""</p>
<p class="MsoNormal"> invoked from
within</p>
<p class="MsoNormal">"expect -nobrace -re+ { exp_continue } -re {^[^</p>
<p class="MsoNormal"> *]*4510_BB2([^#>\r\n]+)?[#>](\([^)\r\n]+\))?}
{ send_user -- "$expect_out(buffer)"</p>
<p class="MsoNormal">
} -re {^[^..."</p>
<p class="MsoNormal"> invoked from
within</p>
<p class="MsoNormal">"expect {</p>
<p class="MsoNormal"> -re
"\b+"
{ exp_continue }</p>
<p class="MsoNormal"> -re "^\[^\n\r *]*$reprompt" { send_user --
"$expect_out(buffer)"</p>
<p class="MsoNormal">
}</p>
<p class="MsoNormal"> -re
"^\[^\n\r]*$reprom..."</p>
<p class="MsoNormal"> (procedure
"run_commands" line 27)</p>
<p class="MsoNormal"> invoked from
within</p>
<p class="MsoNormal">"run_commands $prompt $command"</p>
<p class="MsoNormal">
("foreach" body line 186)</p>
<p class="MsoNormal"> invoked from
within</p>
<p class="MsoNormal">"foreach router [lrange $argv $i end] {</p>
<p class="MsoNormal"> set router [string
tolower $router]</p>
<p class="MsoNormal"> # attempt at
platform switching.</p>
<p class="MsoNormal"> set platform
""</p>
<p class="MsoNormal"> send_user
..."</p>
<p class="MsoNormal"> (file
"/usr/local/rancid/bin/clogin" line 740)</p>
<p class="MsoNormal"><a href="http://172.24.82.3">172.24.82.3</a>: missed cmd(s): show running-config view
full,write term,show running-config</p>
<p class="MsoNormal"><a href="http://172.24.82.3">172.24.82.3</a>: missed cmd(s): show running-config view
full,write term,show running-config</p>
<p class="MsoNormal"><a href="http://172.24.82.3">172.24.82.3</a>: End of run not found</p>
<p class="MsoNormal"><a href="http://172.24.82.3">172.24.82.3</a>: End of run not found</p></div><div class="gmail_extra"><br><br><div class="gmail_quote">On Fri, Nov 29, 2013 at 4:00 PM, Alan McKinnon <span dir="ltr"><<a href="mailto:alan.mckinnon@gmail.com" target="_blank">alan.mckinnon@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div class="im">On 29/11/2013 12:26, Tayfun Sarı wrote:<br>
> Hi all,<br>
><br>
> I got the following config in clogin file as below.AAA is done with ACS<br>
> 4.2 and I am able to run the all commands with rancid user.But in rancid<br>
> I got the error below.Any idea on this?<br>
><br>
><br>
</div>> 172.24.82.3 <<a href="http://172.24.82.3" target="_blank">http://172.24.82.3</a>>: missed cmd(s): show running-config<br>
> view full,write term,show running-config<br>
> 172.24.82.3 <<a href="http://172.24.82.3" target="_blank">http://172.24.82.3</a>>: End of run not found<br>
<div class="im">><br>
><br>
> add method * ssh telnet<br>
> add user * rancid<br>
> add password * r@nc1duz3r<br>
> add autoenable * 1<br>
<br>
</div>Your question cannot be answered on such limited information. All we<br>
know at this point is that something didn't work. What we don't know is<br>
which one of many possible causes is responsible.<br>
<br>
rancid -d <hostname><br>
<br>
will give some debugging information. If that doesn't show the problem,<br>
run the entire clogin command as displayed manually and see if the<br>
script can at least log in and run the commands properly.<br>
<br>
But first do read all the man pages plus the FAQ files shipped in the<br>
tarball. They contain a wealth of information, all useful in tracking<br>
down what your root cause here<br>
<span class="HOEnZb"><font color="#888888"><br>
--<br>
Alan McKinnon<br>
<a href="mailto:alan.mckinnon@gmail.com">alan.mckinnon@gmail.com</a><br>
<br>
_______________________________________________<br>
Rancid-discuss mailing list<br>
<a href="mailto:Rancid-discuss@shrubbery.net">Rancid-discuss@shrubbery.net</a><br>
<a href="http://www.shrubbery.net/mailman/listinfo/rancid-discuss" target="_blank">http://www.shrubbery.net/mailman/listinfo/rancid-discuss</a></font></span></blockquote></div><br></div>