write(spawn_id=1): broken pipe
    while executing
"send_user -- "$expect_out(buffer)""
    invoked from within
"expect -nobrace -re ^H+ { exp_continue } -re {^[^
^M *]*an2-mpls.Sp([^#>\r\n]+)?[#>](\([^)\r\n]+\))?} { send_user -- "$expect_out(buffer)"
                                                } -re {..."
    invoked from within
"expect {
                -re "\b+"                       { exp_continue }
                -re "^\[^\n\r *]*$reprompt"     { send_user -- "$expect_out(buffer)"
                                                }
                -re "^\[^\n\r]*$reprompt."      { send..."
    invoked from within
"if [ string match "*\;*" "$command" ] {
        set commands [split $command \;]
        set num_commands [llength $commands]
        # the pager can not be turned off on ..."
    (procedure "run_commands" line 33)
    invoked from within
"run_commands $prompt $command"
    ("foreach" body line 150)
    invoked from within
"foreach router [lrange $argv $i end] {
    set router [string tolower $router]
    # attempt at platform switching.
    set platform ""
    send_user ..."
    (file "/home/rancid/bin/clogin" line 723)^M
10.10.10.10: missed cmd(s): admin show diag,dir /all slavedisk2:,dir /all sec-slot2:,show diag,dir /all disk1:,dir /all sec-nvram:
,dir /all disk2:,dir /all sec-bootflash:,show spe version,dir /all slaveslot2:,dir /all disk0:,dir /all slaveslot0:,dir /all sec-slo
t1:,dir /all harddiska:,dir /all slavenvram:,dir /all sec-disk2:,dir /all slavesup-bootflash:,dir /all sec-disk0:,dir /all harddiskb
:,show inventory raw,dir /all slavedisk1:,show module,show controllers,show diagbus,dir /all slavedisk0:,show debug,dir /all bootfla
sh:,dir /all sec-slot0:,dir /all sec-disk1:,write term,show vtp status,dir /all sup-bootflash:,dir /all slot2:,dir /all harddisk:,di
r /all slot0:,dir /all sup-microcode:,show vlan,dir /all slavebootflash:,show controllers cbus,dir /all slaveslot1:,show vlan-switch
,show running-config,show c7200,dir /all slot1:
10.10.10.10: End of run not found
!Flash: nvram: Directory of nvram:/

write(spawn_id=1): broken pipe
    while executing
"send_user -- "$expect_out(buffer)""
    invoked from within
"expect -nobrace -re ^H+ { exp_continue } -re {^[^
^M *]*an2-mpls.Sp([^#>\r\n]+)?[#>](\([^)\r\n]+\))?} { send_user -- "$expect_out(buffer)"
                                                } -re {..."
    invoked from within
"expect {
                -re "\b+"                       { exp_continue }
                -re "^\[^\n\r *]*$reprompt"     { send_user -- "$expect_out(buffer)"
                                                }
                -re "^\[^\n\r]*$reprompt."      { send..."
    invoked from within
"if [ string match "*\;*" "$command" ] {
        set commands [split $command \;]
        set num_commands [llength $commands]
        # the pager can not be turned off on ..."
    (procedure "run_commands" line 33)
    invoked from within
"run_commands $prompt $command"
    ("foreach" body line 150)
    invoked from within
"foreach router [lrange $argv $i end] {
    set router [string tolower $router]
    # attempt at platform switching.
    set platform ""
    send_user ..."
    (file "/home/rancid/bin/clogin" line 723)^M
10.10.10.10: missed cmd(s): admin show diag,dir /all slavedisk2:,dir /all sec-slot2:,show diag,dir /all disk1:,dir /all sec-nvram:
,dir /all disk2:,dir /all sec-bootflash:,show spe version,dir /all slaveslot2:,dir /all disk0:,dir /all slaveslot0:,dir /all sec-slo
t1:,dir /all harddiska:,dir /all slavenvram:,dir /all sec-disk2:,dir /all slavesup-bootflash:,dir /all sec-disk0:,dir /all harddiskb
:,show inventory raw,dir /all slavedisk1:,show module,show controllers,show diagbus,dir /all slavedisk0:,show debug,dir /all bootfla
sh:,dir /all sec-slot0:,dir /all sec-disk1:,write term,show vtp status,dir /all sup-bootflash:,dir /all slot2:,dir /all harddisk:,di
r /all slot0:,dir /all sup-microcode:,show vlan,dir /all slavebootflash:,show controllers cbus,dir /all slaveslot1:,show vlan-switch
,show running-config,show c7200,dir /all slot1:
10.10.10.10: End of run not found
!Flash: nvram: Directory of nvram:/
=====================================
Getting missed routers: round 2.

write(spawn_id=1): broken pipe
    while executing
"send_user -- "$expect_out(buffer)""
    invoked from within
"expect -nobrace -re ^H+ { exp_continue } -re {^[^
^M *]*an2-mpls.Sp([^#>\r\n]+)?[#>](\([^)\r\n]+\))?} { send_user -- "$expect_out(buffer)"
                                                } -re {..."
    invoked from within
"expect {
                -re "\b+"                       { exp_continue }
                -re "^\[^\n\r *]*$reprompt"     { send_user -- "$expect_out(buffer)"
                                                }
                -re "^\[^\n\r]*$reprompt."      { send..."
    invoked from within
"if [ string match "*\;*" "$command" ] {
        set commands [split $command \;]
        set num_commands [llength $commands]
        # the pager can not be turned off on ..."
    (procedure "run_commands" line 33)
    invoked from within
"run_commands $prompt $command"
    ("foreach" body line 150)
    invoked from within
"foreach router [lrange $argv $i end] {
    set router [string tolower $router]
    # attempt at platform switching.
    set platform ""
    send_user ..."
    (file "/home/rancid/bin/clogin" line 723)^M
10.10.10.10: missed cmd(s): admin show diag,dir /all slavedisk2:,dir /all sec-slot2:,show diag,dir /all disk1:,dir /all sec-nvram:
,dir /all disk2:,dir /all sec-bootflash:,show spe version,dir /all slaveslot2:,dir /all disk0:,dir /all slaveslot0:,dir /all sec-slo
t1:,dir /all harddiska:,dir /all slavenvram:,dir /all sec-disk2:,dir /all slavesup-bootflash:,dir /all sec-disk0:,dir /all harddiskb
:,show inventory raw,dir /all slavedisk1:,show module,show controllers,show diagbus,dir /all slavedisk0:,show debug,dir /all bootfla
sh:,dir /all sec-slot0:,dir /all sec-disk1:,write term,show vtp status,dir /all sup-bootflash:,dir /all slot2:,dir /all harddisk:,di
r /all slot0:,dir /all sup-microcode:,show vlan,dir /all slavebootflash:,show controllers cbus,dir /all slaveslot1:,show vlan-switch
,show running-config,show c7200,dir /all slot1:
10.10.10.10: End of run not found
!Flash: nvram: Directory of nvram:/
=====================================
Getting missed routers: round 2.aram is OK 

write(spawn_id=1): broken pipe
    while executing
"send_user -- "$expect_out(buffer)""
    invoked from within
"expect -nobrace -re ^H+ { exp_continue } -re {^[^
^M *]*an2-mpls.Sp([^#>\r\n]+)?[#>](\([^)\r\n]+\))?} { send_user -- "$expect_out(buffer)"
                                                } -re {..."
    invoked from within
"expect {
                -re "\b+"                       { exp_continue }
                -re "^\[^\n\r *]*$reprompt"     { send_user -- "$expect_out(buffer)"
                                                }
                -re "^\[^\n\r]*$reprompt."      { send..."
    invoked from within
"if [ string match "*\;*" "$command" ] {
        set commands [split $command \;]
        set num_commands [llength $commands]
        # the pager can not be turned off on ..."
    (procedure "run_commands" line 33)
    invoked from within
"run_commands $prompt $command"
    ("foreach" body line 150)
    invoked from within
"foreach router [lrange $argv $i end] {
    set router [string tolower $router]
    # attempt at platform switching.
    set platform ""
    send_user ..."
    (file "/home/rancid/bin/clogin" line 723)^M
10.10.10.10: missed cmd(s): admin show diag,dir /all slavedisk2:,dir /all sec-slot2:,show diag,dir /all disk1:,dir /all sec-nvram:
,dir /all disk2:,dir /all sec-bootflash:,show spe version,dir /all slaveslot2:,dir /all disk0:,dir /all slaveslot0:,dir /all sec-slo
t1:,dir /all harddiska:,dir /all slavenvram:,dir /all sec-disk2:,dir /all slavesup-bootflash:,dir /all sec-disk0:,dir /all harddiskb
:,show inventory raw,dir /all slavedisk1:,show module,show controllers,show diagbus,dir /all slavedisk0:,show debug,dir /all bootfla
sh:,dir /all sec-slot0:,dir /all sec-disk1:,write term,show vtp status,dir /all sup-bootflash:,dir /all slot2:,dir /all harddisk:,di
r /all slot0:,dir /all sup-microcode:,show vlan,dir /all slavebootflash:,show controllers cbus,dir /all slaveslot1:,show vlan-switch
,show running-config,show c7200,dir /all slot1:
10.10.10.10: End of run not found
!Flash: nvram: Directory of nvram:/
=====================================
Getting missed routers: round 3.

write(spawn_id=1): broken pipe
    while executing
"send_user -- "$expect_out(buffer)""
    invoked from within
"expect -nobrace -re ^H+ { exp_continue } -re {^[^
^M *]*an2-mpls.Sp([^#>\r\n]+)?[#>](\([^)\r\n]+\))?} { send_user -- "$expect_out(buffer)"
                                                } -re {..."
    invoked from within
"expect {
                -re "\b+"                       { exp_continue }
                -re "^\[^\n\r *]*$reprompt"     { send_user -- "$expect_out(buffer)"
                                                }
                -re "^\[^\n\r]*$reprompt."      { send..."
    invoked from within
"if [ string match "*\;*" "$command" ] {
        set commands [split $command \;]
        set num_commands [llength $commands]
        # the pager can not be turned off on ..."
    (procedure "run_commands" line 33)
    invoked from within
"run_commands $prompt $command"
    ("foreach" body line 150)
    invoked from within
"foreach router [lrange $argv $i end] {
    set router [string tolower $router]
    # attempt at platform switching.
    set platform ""
    send_user ..."
    (file "/home/rancid/bin/clogin" line 723)^M
10.10.10.10: missed cmd(s): admin show diag,dir /all slavedisk2:,dir /all sec-slot2:,show diag,dir /all disk1:,dir /all sec-nvram:
,dir /all disk2:,dir /all sec-bootflash:,show spe version,dir /all slaveslot2:,dir /all disk0:,dir /all slaveslot0:,dir /all sec-slo
t1:,dir /all harddiska:,dir /all slavenvram:,dir /all sec-disk2:,dir /all slavesup-bootflash:,dir /all sec-disk0:,dir /all harddiskb
:,show inventory raw,dir /all slavedisk1:,show module,show controllers,show diagbus,dir /all slavedisk0:,show debug,dir /all bootfla
sh:,dir /all sec-slot0:,dir /all sec-disk1:,write term,show vtp status,dir /all sup-bootflash:,dir /all slot2:,dir /all harddisk:,di
r /all slot0:,dir /all sup-microcode:,show vlan,dir /all slavebootflash:,show controllers cbus,dir /all slaveslot1:,show vlan-switch
,show running-config,show c7200,dir /all slot1:
10.10.10.10: End of run not found
!Flash: nvram: Directory of nvram:/
=====================================
Getting missed routers: round 4.

write(spawn_id=1): broken pipe
    while executing
"send_user -- "$expect_out(buffer)""
    invoked from within
"expect -nobrace -re ^H+ { exp_continue } -re {^[^
^M *]*an2-mpls.Sp([^#>\r\n]+)?[#>](\([^)\r\n]+\))?} { send_user -- "$expect_out(buffer)"
                                                } -re {..."
    invoked from within
"expect {
                -re "\b+"                       { exp_continue }
                -re "^\[^\n\r *]*$reprompt"     { send_user -- "$expect_out(buffer)"
                                                }
                -re "^\[^\n\r]*$reprompt."      { send..."
    invoked from within
"if [ string match "*\;*" "$command" ] {
        set commands [split $command \;]
        set num_commands [llength $commands]
        # the pager can not be turned off on ..."
    (procedure "run_commands" line 33)
    invoked from within
"run_commands $prompt $command"
    ("foreach" body line 150)
    invoked from within
"foreach router [lrange $argv $i end] {
    set router [string tolower $router]
    # attempt at platform switching.
    set platform ""
    send_user ..."
    (file "/home/rancid/bin/clogin" line 723)^M
10.10.10.10: missed cmd(s): admin show diag,dir /all slavedisk2:,dir /all sec-slot2:,show diag,dir /all disk1:,dir /all sec-nvram:
,dir /all disk2:,dir /all sec-bootflash:,show spe version,dir /all slaveslot2:,dir /all disk0:,dir /all slaveslot0:,dir /all sec-slo
t1:,dir /all harddiska:,dir /all slavenvram:,dir /all sec-disk2:,dir /all slavesup-bootflash:,dir /all sec-disk0:,dir /all harddiskb
:,show inventory raw,dir /all slavedisk1:,show module,show controllers,show diagbus,dir /all slavedisk0:,show debug,dir /all bootfla
sh:,dir /all sec-slot0:,dir /all sec-disk1:,write term,show vtp status,dir /all sup-bootflash:,dir /all slot2:,dir /all harddisk:,di
r /all slot0:,dir /all sup-microcode:,show vlan,dir /all slavebootflash:,show controllers cbus,dir /all slaveslot1:,show vlan-switch
,show running-config,show c7200,dir /all slot1:
10.10.10.10: End of run not found
!Flash: nvram: Directory of nvram:/