--- rancid Wed Mar 8 09:38:42 2006
+++ f5rancid Thu Feb 2 15:01:11 2006
@@ -1,6 +1,6 @@
#! /usr/bin/perl
##
-## $Id: rancid.in,v 1.174 2004/05/27 22:08:28 heas Exp $
+## $Id: htrancid.in,v 1.5 2004/01/11 03:49:13 heas Exp $
##
## Copyright (C) 1997-2004 by Terrapin Communications, Inc.
## All rights reserved.
@@ -19,9 +19,11 @@
## Henry Kilmer, John Heasley, Andrew Partan, Pete Whiting, and Austin Schutz.
##
#
+# hacked version of Hank's rancid - this one tries to deal with F5 BigIPs.
+#
# RANCID - Really Awesome New Cisco confIg Differ
#
-# usage: rancid [-d] [-l] [-f filename | $host]
+# usage: htrancid [-d] [-l] [-f filename | $host]
#
use Getopt::Std;
getopts('dfl');
@@ -31,7 +33,7 @@
$host = $ARGV[0];
$clean_run = 0;
$found_end = 0;
-$timeo = 90; # clogin timeout in seconds
+$timeo = 90; # blogin timeout in seconds
my(%filter_pwds); # password filtering mode
@@ -135,1470 +137,82 @@
&ipaddrval($a) <=> &ipaddrval($b);
}
-# This routine parses "show version"
-sub ShowVersion {
- print STDERR " In ShowVersion: $_" if ($debug);
- my($slaveslot);
+# This routing parses "b global show"
+sub ShowGlobal {
+ print STDERR " In ShowBase: $_" if ($debug);
while () {
tr/\015//d;
- last if(/^$prompt/);
- next if(/^(\s*|\s*$cmd\s*)$/);
- return(-1) if (/command authorization failed/i);
- # the pager can not be disabled per-session on the PIX
- s/^<-+ More -+>\s*//;
- if (/^Slave in slot (\d+) is running/) {
- $slave = " Slave:";
- $slaveslot = ", slot $1";
- next;
- }
- if (/^Application and Content Networking Software/) { $type="CE"; }
- /^Application and Content Networking Software Release /i &&
- ProcessHistory("COMMENTS","keysort","F1", "!Image: $_") && next;
- /^Cisco Secure PIX /i &&
- ProcessHistory("COMMENTS","keysort","F1", "!Image: $_") && next;
- # PIX fail-over license
- /^This PIX has an?\s+(.*)$/ &&
- ProcessHistory("COMMENTS","keysort","C1", "!$_") && next;
- # PIX Activation Key
- /^Running Activation Key: (.*)$/ &&
- ProcessHistory("COMMENTS","keysort","C1", "!$_") && next;
- /^(LocalDirector \d{3}) (.*)$/ &&
- ProcessHistory("COMMENTS","keysort","F1", "!Image: $2\n") &&
- ProcessHistory("COMMENTS","keysort","A1", "!Chassis type: $1\n") &&
- next;
- /^(Cisco )?IOS .* Software,? \(([A-Za-z-0-9]*)\), .*Version\s+(.*)$/ &&
- ProcessHistory("COMMENTS","keysort","F1",
- "!Image:$slave Software: $2, $3\n") && next;
- /^([A-Za-z-0-9_]*) Synced to mainline version: (.*)$/ &&
- ProcessHistory("COMMENTS","keysort","F2",
- "!Image:$slave $1 Synced to mainline version: $2\n") && next;
- /^Compiled (.*)$/ &&
- ProcessHistory("COMMENTS","keysort","F3",
- "!Image:$slave Compiled: $1\n") && next;
- /^ROM: (IOS \S+ )?(System )?Bootstrap.*(Version.*)$/ &&
- ProcessHistory("COMMENTS","keysort","G1",
- "!ROM Bootstrap: $3\n") && next;
- if (/^Hardware:\s+(.*), (.* RAM), CPU (.*)$/) {
- ProcessHistory("COMMENTS","keysort","A1",
- "!Chassis type: $1 - a PIX\n");
- ProcessHistory("COMMENTS","keysort","A2",
- "!CPU: $3\n");
- ProcessHistory("COMMENTS","keysort","B1", "!Memory: $2\n");
- }
- /^Serial Number:\s+(.*)$/ &&
- ProcessHistory("COMMENTS","keysort","C1", "!$_") && next;
- # CatOS 3500xl stuff
- /^System serial number(:\s+.*)$/ &&
- ProcessHistory("COMMENTS","keysort","C1", "!Serial Number$1\n") &&
- next;
- /^Model / &&
- ProcessHistory("COMMENTS","keysort","C2", "!$_") && next;
- /^Motherboard / &&
- ProcessHistory("COMMENTS","keysort","C3", "!$_") && next;
- /^Power supply / &&
- ProcessHistory("COMMENTS","keysort","C4", "!$_") && next;
-
- /^Activation Key:\s+(.*)$/ &&
- ProcessHistory("COMMENTS","keysort","C2", "!$_") && next;
- /^ROM: \d+ Bootstrap .*(Version.*)$/ &&
- ProcessHistory("COMMENTS","keysort","G2",
- "!ROM Image: Bootstrap $1\n!\n") && next;
- /^ROM: .*(Version.*)$/ &&
- ProcessHistory("COMMENTS","keysort","G3","!ROM Image: $1\n") && next;
- /^BOOTFLASH: .*(Version.*)$/ &&
- ProcessHistory("COMMENTS","keysort","G4","!BOOTFLASH: $1\n") && next;
- /^BOOTLDR: .*(Version.*)$/ &&
- ProcessHistory("COMMENTS","keysort","G4","!BOOTLDR: $1\n") && next;
- /^System image file is "([^\"]*)", booted via (\S*)/ &&
-# removed the booted source due to
-# CSCdk28131: cycling info in 'sh ver'
-# ProcessHistory("COMMENTS","keysort","F4","!Image: booted via $2, $1\n") &&
- ProcessHistory("COMMENTS","keysort","F4","!Image: booted $1\n") &&
- next;
- /^System image file is "([^\"]*)"$/ &&
- ProcessHistory("COMMENTS","keysort","F5","!Image: $1\n") && next;
- if (/(\S+)\s+\((\S+)\)\s+processor.*with (\S+[kK]) bytes/) {
- my($proc) = $1;
- my($cpu) = $2;
- my($mem) = $3;
- my($device) = "router";
-
- # the next line ought to be the more specific cpu info, grab it.
- # yet, some boards/IOS vers have a processor ID line between these
- # two. grrr. make sure we dont grab the "software" junk that
- # follows these lines by looking for "CPU at " or the 2600s
- # "processor: " unique string. there are undoubtedly many other
- # incantations. for a slave, we dont get this info and its just a
- # blank line.
- $_ = ;
- if (/processor board id/i) {
- my($sn);
-
- if (/processor board id (\S+)/i) {
- $sn = $1;
- $sn =~ s/,$//;
- ProcessHistory("COMMENTS","keysort","D9",
- "!Processor ID: $sn\n");
- }
- $_ = ;
- }
- $_ = "" if (! /(cpu at |processor: |$cpu processor,)/i);
- tr/\015//d;
- s/implementation/impl/i;
- if ($_ !~ /^\s*$/) {
- chomp;
- s/^/, /;
- }
-
- if ( $proc eq "CSC") {
- $type = "AGS";
- } elsif ( $proc eq "CSC4") {
- $type = "AGS+";
- } elsif ( $proc =~ /^(AS)?25[12][12]/) {
- $type = "2500";
- } elsif ( $proc =~ /261[01]/ || $proc =~ /262[01]/ ) {
- $type = "2600";
- } elsif ( $proc =~ /^36[0246][0-9]/) {
- $type = "3600";
- } elsif ( $proc =~ /^37/) {
- $type = "3700";
- } elsif ( $proc eq "RSP7000") {
- $type = "7500";
- } elsif ( $proc =~ /RSP\d/) {
- $type = "7500";
- } elsif ( $proc eq "RP1") {
- $type = "7000";
- } elsif ( $proc eq "RP") {
- $type = "7000";
- } elsif ( $proc =~ /720[246]/) {
- $type = "7200";
- } elsif ( $proc =~ /1200[48]\/GRP/ || $proc =~ /1201[26]\/GRP/) {
- $type = "12000";
- } elsif ( $proc =~ /1201[26]-8R\/GRP/) {
- $type = "12000";
- } elsif ( $proc =~ /WS-C29/) {
- $type = "2900XL";
- $device = "switch";
- } elsif ( $proc =~ /WS-C355/) {
- $type = "3550";
- $device = "switch";
- } elsif ( $proc =~ /WS-C35/) {
- $type = "3500XL";
- $device = "switch";
- } elsif ( $proc =~ /WS-C45/) {
- $type = "4500";
- $device = "switch";
- } elsif ( $proc =~ /6000/) {
- $type = "6000";
- $device = "switch";
- } elsif ( $proc =~ /CISCO76/) {
- $type = "7600";
- $device = "router";
- } elsif ( $proc =~ /1900/) {
- $type = "1900";
- $device = "switch";
- } else {
- $type = $proc;
- }
- print STDERR "TYPE = $type\n" if ($debug);
- ProcessHistory("COMMENTS","keysort","A1",
- "!Chassis type:$slave $proc - a $type $device\n");
- ProcessHistory("COMMENTS","keysort","B1",
- "!Memory:$slave main $mem\n");
- ProcessHistory("COMMENTS","keysort","A3","!CPU:$slave $cpu$_$slaveslot\n");
- next;
- }
- if (/(\S+) Silicon\s*Switch Processor/) {
- if (!defined($C0)) {
- $C0=1; ProcessHistory("COMMENTS","keysort","C0","!\n");
- }
- ProcessHistory("COMMENTS","keysort","C2","!SSP: $1\n");
- $ssp = 1;
- $sspmem = $1;
- next;
- }
- /^(\d+[kK]) bytes of multibus/ &&
- ProcessHistory("COMMENTS","keysort","B2",
- "!Memory: multibus $1\n") && next;
- /^(\d+[kK]) bytes of (non-volatile|NVRAM)/ &&
- ProcessHistory("COMMENTS","keysort","B3",
- "!Memory: nvram $1\n") && next;
- /^(\d+[kK]) bytes of flash memory/ &&
- ProcessHistory("COMMENTS","keysort","B5","!Memory: flash $1\n") &&
- next;
- /^(\d+[kK]) bytes of .*flash partition/ &&
- ProcessHistory("COMMENTS","keysort","B6",
- "!Memory: flash partition $1\n") && next;
- /^(\d+[kK]) bytes of Flash internal/ &&
- ProcessHistory("COMMENTS","keysort","B4",
- "!Memory: bootflash $1\n") && next;
- if(/^(\d+[kK]) bytes of (Flash|ATA)?.*PCMCIA .*(slot|disk) ?(\d)/i) {
- ProcessHistory("COMMENTS","keysort","B7",
- "!Memory: pcmcia $2 $3$4 $1\n");
- next;
- }
- if(/^WARNING/) {
- if (!defined($I0)) {
- $I0=1;
- ProcessHistory("COMMENTS","keysort","I0","!\n");
- }
- ProcessHistory("COMMENTS","keysort","I1","! $_");
- }
- if (/^Configuration register is (.*)$/) {
- $config_register=$1;
- next;
- }
- }
- return(0);
-}
-
-# This routine parses "show hardware"
-sub ShowHardware {
- print STDERR " In ShowHardware: $_" if ($debug);
-
- while () {
- tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
- return(1) if /(Invalid input detected|Type help or )/;
- return(-1) if (/command authorization failed/i);
- /^([\w ]+), (.* RAM), CPU (.*)$/ &&
- ProcessHistory("COMMENTS","keysort","A2", "!Motherboard: $1\n") &&
- ProcessHistory("COMMENTS","keysort","A3", "!CPU: $3\n") &&
- ProcessHistory("COMMENTS","keysort","B1", "!Memory: $2\n") &&
- next;
+ ProcessHistory("COMMENTS","keysort","A2","# GLOBAL: $_");
}
+ ProcessHistory("","","","#\n");
return(0);
}
-# This routine parses "show redundancy"
-sub ShowRedundancy {
- print STDERR " In ShowRedundancy: $_" if ($debug);
+# This routine parses "show config"
+sub ShowConfig {
+ print STDERR " In ShowConfig: $_" if ($debug);
while () {
tr/\015//d;
- last if(/^$prompt/);
- next if(/^(\s*|\s*$cmd\s*)$/);
- return(1) if /(Invalid input detected|Type help or )/;
- # the pager can not be disabled per-session on the PIX
- s/^<-+ More -+>\s*//;
-
- /^IOS .* Software \(([A-Za-z-0-9]*)\), .*Version\s+(.*)$/ &&
- ProcessHistory("COMMENTS","keysort","F1",
- "!Image:$slave Software: $1, $2\n") && next;
- /^Compiled (.*)$/ &&
- ProcessHistory("COMMENTS","keysort","F3",
- "!Image:$slave Compiled: $1\n") && next;
- }
- return(0);
-}
-
-# This routine parses "show IDprom"
-sub ShowIDprom {
- my($tmp);
-
- print STDERR " In ShowIDprom: $_" if ($debug);
-
- while () {
- tr/\015//d;
- last if(/^$prompt/);
- next if(/^(\s*|\s*$cmd\s*)$/);
- return(1) if /(Invalid input detected|Type help or )/;
- # the pager can not be disabled per-session on the PIX
- s/^<-+ More -+>\s*//;
-
- /FRU is .(.*)\'/ && ($tmp = $1);
- /Product Number = .(.*)\'/ &&
- ProcessHistory("COMMENTS","keysort","D0",
- "!Catalyst Chassis type: $1, $tmp\n");
- /Serial Number = .([0-9A-Za-z]+)/ &&
- ProcessHistory("COMMENTS","keysort","D1",
- "!Catalyst Chassis S/N: $1\n");
- /Manufacturing Assembly Number = .([-0-9]+)/ && ($tmp = $1);
- /Manufacturing Assembly Revision = .(.*)\'/ && ($tmp .= ", rev " . $1);
- /Hardware Revision = ([0-9.]+)/ &&
- ProcessHistory("COMMENTS","keysort","D2",
- "!Catalyst Chassis assembly: $tmp, ver $1\n");
- }
- return(0);
-}
-
-# This routine parses "show install active"
-sub ShowInstallActive {
- print STDERR " In ShowInstallActive: $_" if ($debug);
-
- while () {
- tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
- return(1) if /^\s*\^\s*$/;
- return(1) if /(Invalid input detected|Type help or )/;
- return(-1) if (/command authorization failed/i);
- # the pager can not be disabled per-session on the PIX
- s/^<-+ More -+>\s*//;
- ProcessHistory("COMMENTS","keysort","F5","!Image: $_") && next;
+ ProcessHistory("","","","$_");
}
return(0);
}
-# This routine parses "show env all"
-sub ShowEnv {
- # Skip if this is not a 7500, 7200, or 7000.
- print STDERR " In ShowEnv: $_" if ($debug);
+# This routine parses "b version"
+sub ShowVersion {
+ print STDERR " In ShowVersion: $_" if ($debug);
while () {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
- #return(1) if ($type !~ /^7/);
- return(-1) if (/command authorization failed/i);
- # the pager can not be disabled per-session on the PIX
- s/^<-+ More -+>\s*//;
- if (!defined($E0)) {
- $E0=1;
- ProcessHistory("COMMENTS","keysort","E0","!\n");
- }
- if (/^Arbiter type (\d), backplane type (\S+)/) {
- if (!defined($C0)) {
- $C0=1; ProcessHistory("COMMENTS","keysort","C0","!\n");
- }
- ProcessHistory("COMMENTS","keysort","C1",
- "!Enviromental Arbiter Type: $1\n");
- ProcessHistory("COMMENTS","keysort","A2",
- "!Chassis type: $2 backplane\n");
- next;
- }
- /^\s*(Power [^:\n]+)$/ &&
- ProcessHistory("COMMENTS","keysort","E1","!Power: $1\n") && next;
- /^\s*(Lower Power .*)/i &&
- ProcessHistory("COMMENTS","keysort","E2","!Power: $1\n") && next;
- /^\s*(redundant .*)/i &&
- ProcessHistory("COMMENTS","keysort","E2","!Power: $1\n") && next;
- /^\s*(RPS is .*)/i &&
- ProcessHistory("COMMENTS","keysort","E2","!Power: $1\n") && next;
+ ProcessHistory("COMMENTS","keysort","A1","# VERSION: $_");
}
- ProcessHistory("COMMENTS","","","!\n");
- return(0);
+ ProcessHistory("","","","#\n");
+ return(0)
}
-# This routine parses "show rsp chassis-info" for the rsp
-# This will create arrays for hw info.
-sub ShowRSP {
- print STDERR " In ShowRSP: $_" if ($debug);
+# This routine parses "cat /config/bigip.license"
+sub ShowLicense {
+ print STDERR " In ShowLicense: $_" if ($debug);
- while () {
- tr/\015//d;
- last if (/^$prompt/);
- next if (/^(\s*|\s*$cmd\s*)$/);
- return(-1) if (/command authorization failed/i);
- # return(1) if ($type !~ /^12[40]/);
- # the pager can not be disabled per-session on the PIX
- s/^<-+ More -+>\s*//;
- /^$/ && next;
-
- /^\s+Chassis model: (\S+)/ &&
- ProcessHistory("COMMENTS","keysort","D1",
- "!RSP Chassis model: $1\n") &&
- next;
- /^\s+Chassis S\/N: (.*)$/ &&
- ProcessHistory("COMMENTS","keysort","D2",
- "!RSP Chassis S/N: $1\n") &&
- next;
- }
-
- return(0);
-}
-
-# This routine parses "show gsr chassis-info" for the gsr
-# This will create arrays for hw info.
-sub ShowGSR {
- # Skip if this is not a 1200n.
- print STDERR " In ShowGSR: $_" if ($debug);
-
- while () {
- tr/\015//d;
- last if (/^$prompt/);
- next if (/^(\s*|\s*$cmd\s*)$/);
- return(-1) if (/command authorization failed/i);
- # return(1) if ($type !~ /^12[40]/);
- # the pager can not be disabled per-session on the PIX
- s/^<-+ More -+>\s*//;
- /^$/ && next;
- /^\s+Chassis: type (\S+) Fab Ver: (\S+)/ &&
- ProcessHistory("COMMENTS","keysort","D1",
- "!GSR Chassis type: $1 Fab Ver: $2\n") &&
- next;
- /^\s+Chassis S\/N: (.*)$/ &&
- ProcessHistory("COMMENTS","keysort","D2",
- "!GSR Chassis S/N: $1\n") &&
- next;
- /^\s+PCA: (\S+)\s*rev: (\S+)\s*dev: \S+\s*HW ver: (\S+)$/ &&
- ProcessHistory("COMMENTS","keysort","D3",
- "!GSR Backplane PCA: $1, rev $2, ver $3\n") &&
- next;
- /^\s+Backplane S\/N: (\S+)$/ &&
- ProcessHistory("COMMENTS","keysort","D4",
- "!GSR Backplane S/N: $1\n") &&
- next;
- }
- ProcessHistory("COMMENTS","","","!\n");
- return(0);
-}
-
-# This routine parses "show boot"
-sub ShowBoot {
- # Pick up boot variables if 7000/7200/7500/12000/2900/3500;
- # otherwise pick up bootflash.
- print STDERR " In ShowBoot: $_" if ($debug);
-
- while () {
- tr/\015//d;
- last if (/^$prompt/);
- next if (/^(\s*|\s*$cmd\s*)$/);
- return(1) if /^\s*\^\s*$/;
- return(-1) if (/command authorization failed/i);
- return(1) if /Ambiguous command/i;
- return(1) if /(Invalid input detected|Type help or )/;
- return(1) if /(Open device \S+ failed|Error opening \S+:)/;
- # the pager can not be disabled per-session on the PIX
- s/^<-+ More -+>\s*//;
- next if /CONFGEN variable/;
- if (!defined($H0)) {
- $H0=1; ProcessHistory("COMMENTS","keysort","H0","!\n");
- }
- if ($type !~ /^(12[04]|7)/) {
- if ($type !~ /^(29|35)00/) {
- ProcessHistory("COMMENTS","keysort","H2","!BootFlash: $_");
- } else {
- ProcessHistory("COMMENTS","keysort","H1","!Variable: $_");
- }
- } elsif (/variable/) {
- ProcessHistory("COMMENTS","keysort","H1","!Variable: $_");
- }
- }
- ProcessHistory("COMMENTS","","","!\n");
- return(0);
-}
-
-# This routine parses "show flash"
-sub ShowFlash {
- # skip if this is 7000, 7200, 7500, or 12000; else we end up with
- # redundant data from dir /all slot0:
- print STDERR " In ShowFlash: $_" if ($debug);
-
- while () {
- tr/\015//d;
- last if (/^$prompt/);
- next if (/^(\s*|\s*$cmd\s*)$/);
- return(1) if ($type =~ /^(12[40]|7)/);
- return(-1) if (/command authorization failed/i);
- return(1) if /^\s*\^\s*$/;
- return(1) if /(Invalid input detected|Type help or )/;
- # the pager can not be disabled per-session on the PIX
- s/^<-+ More -+>\s*//;
- /\s+vlan\.dat$/ && next;
- ProcessHistory("FLASH","","","!Flash: $_");
- }
- ProcessHistory("","","","!\n");
- return;
-}
-
-# This routine parses "dir /all ((disk|slot)N|bootflash|nvram):"
-sub DirSlotN {
- # Skip if this is not a 3600, 7000, 7200, 7500, or 12000.
- print STDERR " In DirSlotN: $_" if ($debug);
-
- my($dev) = (/\s([^\s]+):/);
-
- while () {
- tr/\015//d;
- last if (/^$prompt/);
- next if (/^(\s*|\s*$cmd\s*)$/);
- # return(1) if ($type !~ /^(12[40]|7|36)/);
- return(1) if /^\s*\^\s*$/;
- return(1) if /(Invalid input detected|Type help or )/;
- return(1) if /(No such device|Error Sending Request)/i;
- return(1) if /\%Error: No such file or directory/;
- return(1) if /No space information available/;
- return(-1) if /\%Error calling/;
- return(-1) if /(: device being squeezed|ATA_Status time out)/i; # busy
- return(-1) if (/command authorization failed/i);
- return(1) if /(Open device \S+ failed|Error opening \S+:)/;
- # the pager can not be disabled per-session on the PIX
- s/^<-+ More -+>\s*//;
- ProcessHistory("FLASH","","","!Flash: $dev: $_");
- }
- ProcessHistory("","","","!\n");
- return(0);
-}
-
-# This routine parses "show controllers"
-sub ShowContAll {
- # Skip if this is a 70[01]0, 7500, or 12000.
- print STDERR " In ShowContAll: $_" if ($debug);
-
- while () {
- tr/\015//d;
- last if (/^$prompt/);
- next if (/^(\s*|\s*$cmd\s*)$/);
- # return(1) if ($type =~ /^(12[40]|7[05])/);
- return(-1) if (/command authorization failed/i);
- # the pager can not be disabled per-session on the PIX
- s/^<-+ More -+>\s*//;
- if (/^Interface ([^ \n(]*)/) { $INT = "$1, "; next; }
- /^(BRI unit \d)/ &&
- ProcessHistory("INT","","","!Interface: $1\n") && next;
- /^LANCE unit \d, NIM/ &&
- ProcessHistory("INT","","","!Interface: $_") && next;
- /^(LANCE unit \d)/ &&
- ProcessHistory("INT","","","!Interface: $1\n") && next;
- /(Media Type is \S+),/ &&
- ProcessHistory("INT","","","!\t$1\n");
- if (/(M\dT[^ :]*:) show controller:$/) {
- my($ctlr) = $1;
- $_ = ; tr/\015//d; s/ subunit \d,//;
- ProcessHistory("INT","","","!Interface: $ctlr $_");
- }
- if (/^(\S+) : show controller:$/) {
- my($ctlr) = $1;
- $_ = ; tr/\015//d; s/ subunit \d,//;
- ProcessHistory("INT","","","!Interface: $ctlr: $_");
- }
- /^(HD unit \d), idb/ &&
- ProcessHistory("INT","","","!Interface: $1\n") && next;
- /^HD unit \d, NIM/ &&
- ProcessHistory("INT","","","!Interface: $_") && next;
- /^buffer size \d+ HD unit \d, (.*)/ &&
- ProcessHistory("INT","","","!\t$1\n") && next;
- /^AM79970 / && ProcessHistory("INT","","","!Interface: $_") && next;
- /^buffer size \d+ (Universal Serial: .*)/ &&
- ProcessHistory("INT","","","!\t$1\n") && next;
- /^Hardware is (.*)/ &&
- ProcessHistory("INT","","","!Interface: $INT$1\n") && next;
- /^(QUICC Serial unit \d),/ &&
- ProcessHistory("INT","","","!$1\n") && next;
- /^QUICC Ethernet .*/ &&
- ProcessHistory("INT","","","!$_") && next;
- /^DTE .*\.$/ &&
- ProcessHistory("INT","","","!\t$_") && next;
- /^(cable type :.*),/ &&
- ProcessHistory("INT","","","!\t$1\n") && next;
- /^(.* cable.*), received clockrate \d+$/ &&
- ProcessHistory("INT","","","!\t$1\n") && next;
- /^.* cable.*$/ &&
- ProcessHistory("INT","","","!\t$_") && next;
- }
- return(0);
-}
-
-# This routine parses "show controllers cbus"
-# Some of this is printed out in ShowDiagbus.
-sub ShowContCbus {
- # Skip if this is not a 7000 or 7500.
- print STDERR " In ShowContCbus: $_" if ($debug);
-
- while () {
- tr/\015//d;
- last if (/^$prompt/);
- next if (/^(\s*|\s*$cmd\s*)$/);
- #return(1) if ($type !~ /^7[05]0/);
- return(-1) if (/command authorization failed/i);
- # the pager can not be disabled per-session on the PIX
- s/^<-+ More -+>\s*//;
- if (/^\s*slot(\d+): ([^,]+), hw (\S+), sw (\S+), ccb/) {
- $slot = $1;
- $board{$slot} = $2;
- $hwver{$slot} = $3;
- $hwucode{$slot} = $4;
- } elsif (/^\s*(\S+) (\d+), hardware version (\S+), microcode version (\S+)/) {
- $slot = $2;
- $board{$slot} = $1;
- $hwver{$slot} = $3;
- $hwucode{$slot} = $4;
- } elsif (/(Microcode .*)/) {
- $ucode{$slot} = $1;
- } elsif (/(software loaded .*)/) {
- $ucode{$slot} = $1;
- } elsif (/(\d+) Kbytes of main memory, (\d+) Kbytes cache memory/) {
- $hwmemd{$slot} = $1;
- $hwmemc{$slot} = $2;
- } elsif (/byte buffers/) {
- chop;
- s/^\s*//;
- $hwbuf{$slot} = $_;
- } elsif (/Interface (\d+) - (\S+ \S+),/) {
- $interface = $1;
- ProcessHistory("HW","","",
- "!\n!Int $interface: in slot $slot, named $2\n"); next;
- } elsif (/(\d+) buffer RX queue threshold, (\d+) buffer TX queue limit, buffer size (\d+)/) {
- ProcessHistory("HW","","","!Int $interface: rxq $1, txq $2, bufsize $3\n");
- next;
- }
- }
- return(0);
-}
-
-# This routine parses "show diagbus"
-# This will create arrarys for hw info.
-sub ShowDiagbus {
- # Skip if this is not a 7000, 70[01]0, or 7500.
- print STDERR " In ShowDiagbus: $_" if ($debug);
-
- while () {
- tr/\015//d;
- last if (/^$prompt/);
- next if (/^(\s*|\s*$cmd\s*)$/);
- #return(1) if ($type !~ /^7[05]/);
- return(-1) if (/command authorization failed/i);
- # the pager can not be disabled per-session on the PIX
- s/^<-+ More -+>\s*//;
- if (/^\s*Slot (\d+):/i) {
- $slot = $1;
- next;
- } elsif (/^\s*Slot (\d+) \(virtual\):/i) {
- $slot = $1;
- next;
- } elsif (/^\s*(.*Processor.*|.*controller|.*controler|.*Chassis Interface)(, FRU\s?:.*)?, HW rev (\S+), board revision (\S+)/i) {
- $board = $1;
- $hwver = $3;
- $boardrev = $4;
- if ($board =~ /Processor/) {
- if ($board =~ /7000 Route\/Switch/) {
- $board = "RSP7000";
- } elsif ($board =~ /Route\/Switch Processor (\d)/) {
- $board = "RSP$1";
- } elsif ($board =~ /Route/) {
- $board = "RP";
- } elsif ($board =~ /Silicon Switch/) {
- $board = "SSP";
- } elsif ($board =~ /Switch/) {
- $board = "SP";
- $board = "SSP $sspmem" if $ssp;
- } elsif ($board =~ /ATM/) {
- $board = "AIP";
- }
- } elsif ($board =~ /(.*) controller/i) {
- $board = $1;
- }
- # hwucode{$slot} defined in ShowContCbus
- if (defined $hwucode{$slot}) {
- ProcessHistory("SLOT","","","!\n!Slot $slot/$board: hvers $hwver rev $boardrev ucode $hwucode{$slot}\n");
- } else {
- ProcessHistory("SLOT","","","!\n!Slot $slot/$board: hvers $hwver rev $boardrev\n");
- }
- # These are also from the ShowContCbus
- ProcessHistory("SLOT","","","!Slot $slot/$board: $ucode{$slot}\n") if (defined $ucode{$slot});
- ProcessHistory("SLOT","","","!Slot $slot/$board: memd $hwmemd{$slot}, cache $hwmemc{$slot}\n")
- if ((defined $hwmemd{$slot}) && (defined $hwmemc{$slot}));
- ProcessHistory("SLOT","","","!Slot $slot/$board: $hwbuf{$slot}\n") if (defined $hwbuf{$slot});
- next;
- }
- /Serial number: (\S+)\s*Part number: (\S+)/ &&
- ProcessHistory("SLOT","","",
- "!Slot $slot/$board: part $2, serial $1\n") &&
- next;
- /^\s*Controller Memory Size: (.*)$/ &&
- ProcessHistory("SLOT","","","!Slot $slot/$board: $1\n") &&
- next;
- if (/PA Bay (\d) Information/) {
- $pano = $1;
- if ("PA" =~ /$board/) {
- ($s,$c) = split(/\//,$board);
- $board = "$s/$c/PA $pano";
- } else {
- $board =~ s/\/PA \d//;
- $board = "$board/PA $pano";
- }
- next;
- }
- /\s+(.*) (IP|PA), (\d) ports?,( \S+,)? (FRU\s?: )?(\S+)/ &&
- ProcessHistory("SLOT","","","!Slot $slot/$board: type $6, $3 ports\n") &&
- next;
- /\s+(.*) (IP|PA)( \(\S+\))?, (\d) ports?/ &&
- ProcessHistory("SLOT","","","!Slot $slot/$board: type $1$3, $4 ports\n") &&
- next;
- /^\s*HW rev (\S+), Board revision (\S+)/ &&
- ProcessHistory("SLOT","","","!Slot $slot/$board: hvers $1 rev $2\n") &&
- next;
- /Serial number: (\S+)\s*Part number: (\S+)/ &&
- ProcessHistory("SLOT","","","!Slot $slot/$board: part $2, serial $1\n") && next;
- }
- return(0);
-}
-
-# This routine parses "show diag" for the gsr, 7200, 3700, 3600, 2600.
-# This will create arrarys for hw info.
-sub ShowDiag {
- # Skip if this is not a 12000.
- print STDERR " In ShowDiag: $_" if ($debug);
-
- while () {
- tr/\015//d;
- last if (/^$prompt/);
- next if (/^(\s*|\s*$cmd\s*)$/);
- # return(1) if ($type !~ /^(12[40]|720|36|26)/);
- return(-1) if (/command authorization failed/i);
- /^$/ && next;
- # the pager can not be disabled per-session on the PIX
- s/^<-+ More -+>\s*//;
-
- s/Port Packet Over SONET/POS/;
- if (/^\s*SLOT\s+(\d+)\s+\((.*)\): (.*)/) {
- $slot = $1;
- ProcessHistory("SLOT","","","!\n");
- ProcessHistory("SLOT","keysort","A","!Slot $slot: $3\n");
- next;
- }
- if (/^\s+MAIN:\s* type \d+,\s+(.*)/) {
- ProcessHistory("SLOT","keysort","AM","!Slot $slot/MAIN: part $1\n");
- next;
- }
- if (/^c3700\s+(io-board|mid-plane)/i) {
- $slot=$1;
- ProcessHistory("SLOT","","","!\n");
- ProcessHistory("SLOT","keysort","A","!Slot $slot: part $1\n");
- next;
- }
- if (/ Engine:\s+(.*)/) {
- ProcessHistory("SLOT","keysort","AE","!Slot $slot/Engine: $1\n");
- }
- if (/FRU:\s+Linecard\/Module:\s+(\S+)/) {
- ProcessHistory("SLOT","keysort","AF","!Slot $slot/FRU: Linecard/Module: $1\n");
- next;
- }
- if (/^\s+PCA:\s+(.*)/) {
- local($part) = $1;
- $_ = ;
- /^\s+(HW version|design release) (\S+)\s+S\/N (\S+)/i &&
- ProcessHistory("SLOT","keysort","C1","!Slot $slot/PCA: part $part, serial $3\n") &&
- ProcessHistory("SLOT","keysort","C2","!Slot $slot/PCA: hvers $2\n");
- next;
- }
- if (/^\s+MBUS: .*\)\s+(.*)/) {
- local($tmp) = "!Slot $slot/MBUS: part $1";
- $_ = ;
- /^\s+HW version (\S+)\s+S\/N (\S+)/ &&
- ProcessHistory("SLOT","keysort","MB1","$tmp, serial $2\n") &&
- ProcessHistory("SLOT","keysort","MB2","!Slot $slot/MBUS: hvers $1\n");
- next;
- }
- if (/^\s+MBUS Agent Software version (.*)/) {
- ProcessHistory("SLOT","keysort","MB3","!Slot $slot/MBUS: software $1\n");
- next;
- }
- if (/^\s+ROM Monitor version (.*)/) {
- ProcessHistory("SLOT","keysort","R","!Slot $slot/ROM Monitor: version $1\n");
- next;
- }
- if (/^\s+Fabric Downloader version used (.*)/) {
- ProcessHistory("SLOT","keysort","Z","!Slot $slot/Fabric Downloader: version $1\n");
- next;
- }
- if (/^\s+DRAM size: (\d+)/) {
- local($dram) = $1 / 1048576;
- $_ = ;
- if (/^\s+FrFab SDRAM size: (\d+)/) {
- ProcessHistory("SLOT","keysort","MB4","!Slot $slot/MBUS: $dram Mbytes DRAM, "
- . $1 / 1024 . " Kbytes SDRAM\n");
- } else {
- ProcessHistory("SLOT","keysort","MB4","!Slot $slot/MBUS: $dram Mbytes DRAM\n");
- }
- next;
- }
- # 7200, 3600, 2600, and 1700 stuff
- if (/^(Slot)\s+(\d+(\/\d+)?):/
- || /^\s+(WIC|VIC|WIC\/VIC) Slot (\d):/
- || /^(Encryption AIM) (\d):/) {
- if ($1 eq "WIC") {
- $WIC = "/$2";
- } elsif ($1 eq "VIC") {
- $WIC = "/$2";
- } elsif ($1 eq "WIC/VIC") {
- $WIC = "/$2";
- } elsif ($1 eq "DSP") {
- $WIC = "/$2";
- } elsif ($1 eq "Encryption AIM") {
- $slot = "$2";
- undef($WIC);
- ProcessHistory("SLOT","","","!\n");
- ProcessHistory("SLOT","keysort","B","!Slot $slot: type $1\n");
- next;
- } else {
- $slot = $2;
- undef($WIC);
- }
- $_ = ; tr/\015//d;
-
- # clean up hideous 7200/etc formats to look more like 7500 output
- s/Fast-ethernet on C7200 I\/O card/FE-IO/;
- s/ with MII or RJ45/-TX/;
- s/Fast-ethernet /100Base/; s/[)(]//g;
- s/intermediate reach/IR/i;
-
- ProcessHistory("SLOT","","","!\n");
- /\s+(.*) port adapter,?\s+(\d+)\s+/i &&
- ProcessHistory("SLOT","keysort","B","!Slot $slot: type $1, $2 ports\n") && next;
- # I/O controller with no interfaces
- /\s+(.*)\s+port adapter\s*$/i &&
- ProcessHistory("SLOT","keysort","B","!Slot $slot: type $1, 0 ports\n") && next;
- /\s+(.*)\s+daughter card(.*)$/ &&
- ProcessHistory("SLOT","keysort","B","!Slot $slot$WIC: type $1$2\n") && next;
- /\s+(FT1)$/ &&
- ProcessHistory("SLOT","keysort","B","!Slot $slot$WIC: type $1\n") && next;
- # handle WICs lacking "daughter card" in the 2nd line of their
- # show diag o/p
- if (defined($WIC)) {
- s/^\s+//;
- ProcessHistory("SLOT","keysort","B","!Slot $slot$WIC: type $_");
- }
- next;
- } elsif (/^\s+(.* (DSP) Module) Slot (\d):/) {
- # The 1760 (at least) has yet another format...where it has two
- # dedicated DSP slots, and thus two slot 0s.
- my($TYPE) = $1;
- $WIC = "/$3";
- ProcessHistory("SLOT","","","!\n");
- ProcessHistory("SLOT","keysort","B",
- "!Slot $slot$WIC: type $TYPE\n");
- next;
- }
- # yet another format. seen on 2600s w/ 12.1, but appears to be all
- # 12.1, including 7200s & 3700s. Sometimes the PCB serial appears
- # before the hardware revision.
- if (/(pcb serial number|hardware revision)\s+:\s+(\S+)$/i) {
- my($hw, $pn, $rev, $sn);
- if ($1 =~ /^pcb/i) {
- $sn = $2;
- } else {
- $hw = $2;
- }
- while () {
- tr/\015//d;
-
- if (/0x..: / || /^$/) {
- # no effing idea why break does not work there
- goto PerlSucks;
- }
- if (/hardware revision\s+:\s+(\S+)/i) { $hw = $1; }
- if (/part number\s+:\s+(\S+)/i) { $pn = $1; }
- if (/board revision\s+:\s+(\S+)/i) { $rev = $1; }
- if (/pcb serial number\s+:\s+(\S+)/i) { $sn = $1; }
- }
-PerlSucks:
- ProcessHistory("SLOT","keysort","B","!Slot $slot$WIC: hvers $hw rev $rev\n");
- ProcessHistory("SLOT","keysort","C","!Slot $slot$WIC: part $pn, serial $sn\n");
- }
- /revision\s+(\S+).*revision\s+(\S+)/ &&
- ProcessHistory("SLOT","keysort","C","!Slot $slot$WIC: hvers $1 rev $2\n") &&
- next;
- /number\s+(\S+)\s+Part number\s+(\S+)/ &&
- ProcessHistory("SLOT","keysort","D","!Slot $slot$WIC: part $2, serial $1\n") &&
- next;
- }
- ProcessHistory("SLOT","","","!\n");
- return(0);
-}
-
-# This routine parses "show module".
-sub ShowModule {
- print STDERR " In ShowModule: $_" if ($debug);
-
- my(@lines);
- my($slot);
-
- while () {
- tr/\015//d;
- return if (/^\s*\^$/);
- last if (/^$prompt/);
- next if (/^(\s*|\s*$cmd\s*)$/);
- return(-1) if (/command authorization failed/i);
- # the pager can not be disabled per-session on the PIX
- s/^<-+ More -+>\s*//;
-
- # match slot/card info line
- if (/^ *(\d+)\s+(\d+)\s+(.*)\s+(\S+)\s+(\S+)\s*$/) {
- $lines[$1] .= "!Slot $1: type $3, $2 ports\n!Slot $1: part $4, serial $5\n";
- $lines[$1] =~ s/\s+,/,/g;
- }
- # now match the Revs in the second paragraph of o/p and stick it in
- # the array with the previous bits...grumble.
- if (/^ *(\d+)\s+\S+\s+to\s+\S+\s+(\S+)\s+(\S*)\s+(\S+)(\s+\S+)?\s*$/) {
- $lines[$1] .= "!Slot $1: hvers $2, firmware $3, sw $4\n";
- $lines[$1] =~ s/\s+,/,/g;
- }
- }
- foreach $slot (@lines) {
- next if ($slot =~ /^\s*$/);
- ProcessHistory("Module","","","$slot!\n");
- }
-
- return(0);
-}
-
-# This routine parses "show spe version".
-sub ShowSpeVersion {
- print STDERR " In ShowSpeVersion: $_" if ($debug);
-
- while () {
- tr/\015//d;
- last if (/^$prompt/);
- next if (/^(\s*|\s*$cmd\s*)$/);
- return(1) if /^\s*\^\s*$/;
- return(1) if /(Invalid input detected|Type help or )/;
- return(-1) if (/command authorization failed/i);
-
- ProcessHistory("MODEM","","","!Modem: $_") && next;
- }
- ProcessHistory("MODEM","","","!\n");
- return(0);
-}
-
-# This routine parses "show c7200" for the 7200
-# This will create arrays for hw info.
-sub ShowC7200 {
- # Skip if this is not a 7200.
- print STDERR " In ShowC7200: $_" if ($debug);
-
- while () {
- tr/\015//d;
- last if (/^$prompt/);
- next if (/^(\s*|\s*$cmd\s*)$/);
- #return(1) if ($type !~ /^72/);
- return(-1) if (/command authorization failed/i);
- /^$/ && next;
- # the pager can not be disabled per-session on the PIX
- s/^<-+ More -+>\s*//;
- if (/^(C7200 )?Midplane EEPROM:/) {
- $_ = ;
- /revision\s+(\S+).*revision\s+(\S+)/;
- ProcessHistory("SLOT","","","!Slot Midplane: hvers $1 rev $2\n");
- $_ = ;
- /number\s+(\S+)\s+Part number\s+(\S+)/;
- ProcessHistory("SLOT","","","!Slot Midplane: part $2, serial $1\n!\n");
- next;
- }
- if (/C720\d(VXR)? CPU EEPROM:/) {
- my ($hvers,$rev,$part,$serial);
- # npe400s report their cpu eeprom info differently w/ 12.0.21S
- while () {
- /Hardware Revision\s+: (\S+)/ && ($hvers = $1) && next;
- /Board Revision\s+: (\S+)/ && ($rev = $1) && next;
- /Part Number\s+: (\S+)/ && ($part = $1) && next;
- /Serial Number\s+: (\S+)/ && ($serial = $1) && next;
- /revision\s+(\S+).*revision\s+(\S+)/ &&
- ($hvers = $1, $rev = $2) && next;
- /number\s+(\S+)\s+Part number\s+(\S+)/ &&
- ($serial = $1, $part = $2) && next;
- /^\s*$/ && last;
- }
- ProcessHistory("SLOT","","","!Slot CPU: hvers $hvers rev $rev\n");
- ProcessHistory("SLOT","","","!Slot CPU: part $part, serial $serial\n!\n");
- next;
- }
- }
- return(0);
-}
-
-# This routine parses "show vtp status"
-sub ShowVTP {
- print STDERR " In ShowVTP: $_" if ($debug);
-
- while () {
- tr/\015//d;
- last if (/^$prompt/);
- next if (/^(\s*|\s*$cmd\s*)$/);
- return(1) if /^\s*\^\s*$/;
- return(1) if /(Invalid input detected|Type help or )/;
- #return(1) if ($type !~ /^(2900XL|3500XL|6000)$/);
- return(-1) if (/command authorization failed/i);
- next if (/^Configuration last modified by/);
- # the pager can not be disabled per-session on the PIX
- s/^<-+ More -+>\s*//;
- if (/^VTP Operating Mode\s+:\s+(Transparent|Server)/) {
- $DO_SHOW_VLAN = 1;
- }
- ProcessHistory("COMMENTS","keysort","I0","!VTP: $_");
- }
- ProcessHistory("COMMENTS","keysort","I0","!\n");
- return(0);
-}
-
-# This routine parses "show vlan"
-sub ShowVLAN {
- print STDERR " In ShowVLAN: $_" if ($debug);
-
- ($_=,return(1)) if (!$DO_SHOW_VLAN);
-
- while () {
- tr/\015//d;
- last if (/^$prompt/);
- next if (/^(\s*|\s*$cmd\s*)$/);
- return(1) if /(Invalid input detected|Type help or )/;
- # newer releases (~12.1(9)) place the vlan config in the normal
- # configuration (write term).
- return(1) if ($type =~ /^(3550|4500|7600)$/);
- #return(1) if ($type !~ /^(2900XL|3500XL|6000)$/);
- return(-1) if (/command authorization failed/i);
- # the pager can not be disabled per-session on the PIX
- s/^<-+ More -+>\s*//;
- ProcessHistory("COMMENTS","keysort","IO","!VLAN: $_");
- }
- ProcessHistory("COMMENTS","keysort","IO","!\n");
- return(0);
-}
-
-# This routine parses "show failover"
-sub ShowFail {
- print STDERR " In ShowFail: $_" if ($debug);
-
- my $ThisHost;
- while () {
+ while () {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
- return(1) if /(Invalid input detected|Type help or )/;
- /No license for Failover/i
- && ProcessHistory("COMMENTS","keysort","J0","!Failover: $_");
- /Failover O/i
- && ProcessHistory("COMMENTS","keysort","J0","!Failover: $_");
- /Cable Status:/i
- && ProcessHistory("COMMENTS","keysort","J0","!Failover: $_");
- /Last Failover at:/i
- && ProcessHistory("COMMENTS","keysort","J0","!Failover: $_");
- /This host: (?:Primary|Secondary) - (Active|Standby)/i && do {
- $ThisHost = ($1 =~ /standby/i) ? 0 : 1;
- ProcessHistory("COMMENTS","keysort","J0","!Failover: $_"); };
- /Other host: (?:Primary|Secondary) - (Active|Standby)/i && do {
- $ThisHost = ($1 =~ /standby/i) ? 0 : 1;
- ProcessHistory("COMMENTS","keysort","J0","!Failover: $_"); };
- /Active time:/i && $ThisHost eq 0
- && ProcessHistory("COMMENTS","keysort","J0","!Failover: $_");
- /Link :/i
- && ProcessHistory("COMMENTS","keysort","J0","!Failover: $_");
+ ProcessHistory("COMMENTS","keysort","A1","# LICENSE: $_");
}
- ProcessHistory("COMMENTS","keysort","J0","!\n");
- return(0);
+ ProcessHistory("","","","#\n");
+ return(0)
}
-# This routine processes a "write term"
-sub WriteTerm {
- print STDERR " In WriteTerm: $_" if ($debug);
- my($lineauto,$comment,$linecnt) = (0,0,0);
- while () {
- tr/\015//d;
- last if(/^$prompt/);
- return(-1) if (/command authorization failed/i);
- return(1) if /(Invalid input detected|Type help or )/;
- # the pager can not be disabled per-session on the PIX
- s/^<-+ More -+>\s*//;
- /Non-Volatile memory is in use/ && return(-1); # NvRAM is locked
- return(0) if ($found_end); # Only do this routine once
- $linecnt++;
- $lineauto = 0 if (/^[^ ]/);
- # skip the crap
- if (/^(##+$|(Building|Current) configuration)/i) {
- while () {
- next if (/^Current configuration\s*:/i);
- next if (/^:/);
- next if (/^([%!].*|\s*)$/);
- next if (/^ip add.*ipv4:/); # band-aid for 3620 12.0S
- last;
- }
- if (defined($config_register)) {
- ProcessHistory("","","","!\nconfig-register $config_register\n");
- }
- tr/\015//d;
- }
- # some versions have other crap mixed in with the bits in the
- # block above
- /^! (Last configuration|NVRAM config last)/ && next;
-
- # skip consecutive comment lines to avoid oscillating extra comment
- # line on some access servers. grrr.
- if (/^!/) {
- next if ($comment);
- ProcessHistory("","","",$_);
- $comment++;
- next;
- }
- $comment = 0;
-
- # Dog gone Cool matches to process the rest of the config
- /^tftp-server flash / && next; # kill any tftp remains
- /^ntp clock-period / && next; # kill ntp clock-period
- /^ length / && next; # kill length on serial lines
- /^ width / && next; # kill width on serial lines
- $lineauto = 1 if /^ modem auto/;
- /^ speed / && $lineauto && next; # kill speed on serial lines
- /^ clockrate / && next; # kill clockrate on serial interfaces
- if (/^(enable )?(password|passwd) / && $filter_pwds >= 1) {
- ProcessHistory("ENABLE","","","!$1$2 \n");
- next;
- }
- if (/^(enable secret) / && $filter_pwds >= 2) {
- ProcessHistory("ENABLE","","","!$1 \n");
- next;
- }
- if (/^username (\S+)(\s.*)? secret /) {
- if ($filter_pwds >= 2) {
- ProcessHistory("USER","keysort","$1","!username $1$2 secret \n");
- } else {
- ProcessHistory("USER","keysort","$1","$_");
- }
- next;
- }
- if (/^username (\S+)(\s.*)? password ((\d) \S+|\S+)/) {
- if ($filter_pwds >= 2) {
- ProcessHistory("USER","keysort","$1","!username $1$2 password \n");
- } elsif ($filter_pwds >= 1 && $4 ne "5"){
- ProcessHistory("USER","keysort","$1","!username $1$2 password \n");
- } else {
- ProcessHistory("USER","keysort","$1","$_");
- }
- next;
- }
- if (/^( set session-key (in|out)bound ah \d+ )/ && $filter_pwds >= 1) {
- ProcessHistory("","","","!$1\n");
- next;
- }
- if (/^( set session-key (in|out)bound esp \d+ (authenticator|cypher) )/ && $filter_pwds >= 1) {
- ProcessHistory("","","","!$1\n");
- next;
- }
- if (/^(\s*)password / && $filter_pwds >= 1) {
- ProcessHistory("LINE-PASS","","","!$1password \n");
- next;
- }
- if (/^(\s*)secret / && $filter_pwds >= 2) {
- ProcessHistory("LINE-PASS","","","!$1secret \n");
- next;
- }
- if (/^\s*neighbor (\S*) password / && $filter_pwds >= 1) {
- ProcessHistory("","","","! neighbor $1 password \n");
- next;
- }
- if (/^(ppp .* password) 7 .*/ && $filter_pwds >= 1) {
- ProcessHistory("","","","!$1 \n"); next;
- }
- if (/^(ip ftp password) / && $filter_pwds >= 1) {
- ProcessHistory("","","","!$1 \n"); next;
- }
- if (/^( ip ospf authentication-key) / && $filter_pwds >= 1) {
- ProcessHistory("","","","!$1 \n"); next;
- }
- # isis passwords appear to be completely plain-text
- if (/^\s+isis password (\S+)( .*)?/ && $filter_pwds >= 1) {
- ProcessHistory("","","","!isis password $2\n"); next;
- }
- if (/^\s+(domain-password|area-password) (\S+)( .*)?/
- && $filter_pwds >= 1) {
- ProcessHistory("","","","!$1 $3\n"); next;
- }
- # this is reversable, despite 'md5' in the cmd
- if (/^( ip ospf message-digest-key \d+ md5) / && $filter_pwds >= 1) {
- ProcessHistory("","","","!$1 \n"); next;
- }
- if (/^((crypto )?isakmp key) \S+ / && $filter_pwds >= 1) {
- ProcessHistory("","","","!$1 $'"); next;
- }
- # filter HSRP passwords
- if (/^(\s+standby \d authentication) / && $filter_pwds >= 1) {
- ProcessHistory("","","","!$1 \n"); next;
- }
- # this appears in "measurement/sla" images
- if (/^(\s+key-string \d?)/ && $filter_pwds >= 1) {
- ProcessHistory("","","","!$1 \n"); next;
- }
- if (/^( l2tp tunnel \S+ password)/ && $filter_pwds >= 1) {
- ProcessHistory("","","","!$1 \n"); next;
- }
- # i am told these are plain-text on the PIX
- if (/^(vpdn username \S+ password)/ && $filter_pwds >= 1) {
- ProcessHistory("","","","!$1 \n"); next;
- }
- if (/^(vpngroup \S+ password)/ && $filter_pwds >= 1) {
- ProcessHistory("","","","!$1 \n"); next;
- }
- if (/^( cable shared-secret ) / && $filter_pwds >= 1) {
- ProcessHistory("","","","!$1 \n");
- next;
- }
- /fair-queue individual-limit/ && next;
- # sort ip explicit-paths.
- if (/^ip explicit-path name (\S+)/) {
- my($key) = $1;
- my($expath) = $_;
- while () {
- tr/\015//d;
- last if (/^$prompt/);
- last if (/^$prompt/ || ! /^(ip explicit-path name |[ !])/);
- if (/^ip explicit-path name (\S+)/) {
- ProcessHistory("EXPATH","keysort","$key","$expath");
- $key = $1;
- $expath = $_;
- } else {
- $expath .= $_;
- }
- }
- ProcessHistory("EXPATH","keysort","$key","$expath");
- }
- # sort route-maps
- if (/^route-map (\S+)/) {
- my($key) = $1;
- my($routemap) = $_;
- while () {
- tr/\015//d;
- last if (/^$prompt/ || ! /^(route-map |[ !])/);
- if (/^route-map (\S+)/) {
- ProcessHistory("ROUTEMAP","keysort","$key","$routemap");
- $key = $1;
- $routemap = $_;
- } else {
- $routemap .= $_;
- }
- }
- ProcessHistory("ROUTEMAP","keysort","$key","$routemap");
- }
- # filter out any RCS/CVS tags to avoid confusing local CVS storage
- s/\$(Revision|Id):/ $1:/;
- # order access-lists
- /^access-list\s+(\d\d?)\s+(\S+)\s+(\S+)/ &&
- ProcessHistory("ACL $1 $2","ipsort","$3","$_") && next;
- # order extended access-lists
- /^access-list\s+(\d\d\d)\s+(\S+)\s+ip\s+host\s+(\S+)/ &&
- ProcessHistory("EACL $1 $2","ipsort","$3","$_") && next;
- /^access-list\s+(\d\d\d)\s+(\S+)\s+ip\s+(\d\S+)/ &&
- ProcessHistory("EACL $1 $2","ipsort","$3","$_") && next;
- /^access-list\s+(\d\d\d)\s+(\S+)\s+ip\s+any/ &&
- ProcessHistory("EACL $1 $2","ipsort","0.0.0.0","$_") && next;
- # order arp lists
- /^arp\s+(\d+\.\d+\.\d+\.\d+)\s+/ &&
- ProcessHistory("ARP","ipsort","$1","$_") && next;
- /^ip prefix-list\s+(\S+)\s+seq\s+(\d+)\s+(permit|deny)\s+(\d\S+)(\/.*)$/ &&
- ProcessHistory("PACL $1 $3","ipsort","$4","ip prefix-list $1 $3 $4$5\n")
- && next;
- # order logging statements
- /^logging (\d+\.\d+\.\d+\.\d+)/ &&
- ProcessHistory("LOGGING","ipsort","$1","$_") && next;
- # order/prune snmp-server host statements
- # we only prune lines of the form
- # snmp-server host a.b.c.d
- if (/^snmp-server host (\d+\.\d+\.\d+\.\d+) /) {
- if (defined($ENV{'NOCOMMSTR'})) {
- my($ip) = $1;
- my($line) = "snmp-server host $ip";
- my(@tokens) = split(' ', $');
- my($token);
- while ($token = shift(@tokens)) {
- if ($token eq 'version') {
- $line .= " " . join(' ', ($token, shift(@tokens)));
- } elsif ($token =~ /^(informs?|traps?|(no)?auth)$/) {
- $line .= " " . $token;
- } else {
- $line = "!$line " . join(' ', ("", join(' ',@tokens)));
- last;
- }
- }
- ProcessHistory("SNMPSERVERHOST","ipsort","$ip","$line\n");
- } else {
- ProcessHistory("SNMPSERVERHOST","ipsort","$1","$_");
- }
- next;
- }
- if (/^(snmp-server community) (\S+)/) {
- if (defined($ENV{'NOCOMMSTR'})) {
- ProcessHistory("SNMPSERVERCOMM","keysort","$_","!$1 $'") && next;
- } else {
- ProcessHistory("SNMPSERVERCOMM","keysort","$_","$_") && next;
- }
- }
- # prune tacacs/radius server keys
- if (/^(tacacs-server|radius-server) key / && $filter_pwds >= 1) {
- ProcessHistory("","","","!$1 key \n"); next;
- }
- if (/^((tacacs-server|radius-server) host \S+ key) / &&
- $filter_pwds >= 1) {
- ProcessHistory("","","","!$1 \n"); next;
- }
- if (/^(aaa-server \S+ \(\S+\) host \d+\.\d+\.\d+\.\d+) \S+ (timeout \d+$)/ &&
- $filter_pwds >= 1) {
- ProcessHistory("","","","!$1 $2\n"); next;
- }
- # order clns host statements
- /^clns host \S+ (\S+)/ &&
- ProcessHistory("CLNS","keysort","$1","$_") && next;
- # order alias statements
- /^alias / && ProcessHistory("ALIAS","keysort","$_","$_") && next;
- # delete ntp auth password - this md5 is a reversable too
- if (/^(ntp authentication-key \d+ md5) / && $filter_pwds >= 1) {
- ProcessHistory("","","","!$1 \n"); next;
- }
- # order ntp peers/servers
- if (/^ntp (server|peer) (\d+)\.(\d+)\.(\d+)\.(\d+)/) {
- $sortkey = sprintf("$1 %03d%03d%03d%03d",$2,$3,$4,$5);
- ProcessHistory("NTP","keysort",$sortkey,"$_");
- next;
- }
- # order ip host statements
- /^ip host (\S+) / &&
- ProcessHistory("IPHOST","keysort","$1","$_") && next;
- # order ip nat source static statements
- /^ip nat (\S+) source static (\S+)/ &&
- ProcessHistory("IP NAT $1","ipsort","$2","$_") && next;
- # order atm map-list statements
- /^\s+ip\s+(\d+\.\d+\.\d+\.\d+)\s+atm-vc/ &&
- ProcessHistory("ATM map-list","ipsort","$1","$_") && next;
- # order ip rcmd lines
- /^ip rcmd/ && ProcessHistory("RCMD","keysort","$_","$_") && next;
-
- # system controller
- /^syscon address (\S*) (\S*)/ &&
- ProcessHistory("","","","!syscon address $1 \n") &&
- next;
- if (/^syscon password (\S*)/ && $filter_pwds >= 1) {
- ProcessHistory("","","","!syscon password \n");
- next;
- }
-
- # catch anything that wasnt matched above.
- ProcessHistory("","","","$_");
- # end of config. the ": " game is for the PIX
- if (/^(: +)?end$/) {
- $found_end = 1;
- return(1);
- }
- }
- # The ContentEngine lacks a definitive "end of config" marker. If we
- # know that it is a CE and we have seen at least 5 lines of write term
- # o/p, we can be reasonably sure that we got the config.
- if ($type =~ /^CE$/ && $linecnt > 5) {
- $found_end = 1;
- return(1);
- }
-
- return(0);
-}
-
# dummy function
sub DoNothing {print STDOUT;}
# Main
%commands=(
- 'show version' => "ShowVersion",
- 'show hardware' => "ShowHardware",
- 'show redundancy secondary' => "ShowRedundancy",
- 'show idprom backplane', => "ShowIDprom",
- 'show install active' => "ShowInstallActive",
- 'show env all' => "ShowEnv",
- 'show rsp chassis-info',=> "ShowRSP",
- 'show gsr chassis' => "ShowGSR",
- 'show boot' => "ShowBoot",
- 'show bootvar' => "ShowBoot",
- 'show variables boot' => "ShowBoot",
- 'show flash' => "ShowFlash",
- 'dir /all nvram:' => "DirSlotN",
- 'dir /all bootflash:' => "DirSlotN",
- 'dir /all slot0:' => "DirSlotN",
- 'dir /all disk0:' => "DirSlotN",
- 'dir /all slot1:' => "DirSlotN",
- 'dir /all disk1:' => "DirSlotN",
- 'dir /all slot2:' => "DirSlotN",
- 'dir /all disk2:' => "DirSlotN",
- 'dir /all harddisk:' => "DirSlotN",
- 'dir /all harddiska:' => "DirSlotN",
- 'dir /all harddiskb:' => "DirSlotN",
- "dir /all sup-bootflash:"=> "DirSlotN", # cat 6500-ios
- "dir /all sup-microcode:"=> "DirSlotN", # cat 6500-ios
- 'dir /all slavenvram:' => "DirSlotN",
- 'dir /all slavebootflash:' => "DirSlotN",
- 'dir /all slaveslot0:' => "DirSlotN",
- 'dir /all slavedisk0:' => "DirSlotN",
- 'dir /all slaveslot1:' => "DirSlotN",
- 'dir /all slavedisk1:' => "DirSlotN",
- 'dir /all slaveslot2:' => "DirSlotN",
- 'dir /all slavedisk2:' => "DirSlotN",
- "dir /all slavesup-bootflash:"=> "DirSlotN", # cat 7609
- 'dir /all sec-nvram:' => "DirSlotN",
- 'dir /all sec-bootflash:' => "DirSlotN",
- 'dir /all sec-slot0:' => "DirSlotN",
- 'dir /all sec-disk0:' => "DirSlotN",
- 'dir /all sec-slot1:' => "DirSlotN",
- 'dir /all sec-disk1:' => "DirSlotN",
- 'dir /all sec-slot2:' => "DirSlotN",
- 'dir /all sec-disk2:' => "DirSlotN",
- 'show controllers' => "ShowContAll",
- 'show controllers cbus' => "ShowContCbus",
- 'show diagbus' => "ShowDiagbus",
- 'show diag' => "ShowDiag",
- 'show module' => "ShowModule", # cat 6500-ios
- 'show spe version' => "ShowSpeVersion",
- 'show c7200' => "ShowC7200",
- 'show vtp status' => "ShowVTP",
- 'show vlan' => "ShowVLAN",
- 'show failover' => "ShowFail",
- 'show running-config' => "WriteTerm",
- 'write term' => "WriteTerm"
+ 'b version' => "ShowVersion",
+ 'b global show' => "ShowGlobal",
+ 'b list' => "ShowConfig",
+ 'cat /config/bigip.license' => "ShowLicense"
);
+
# keys() doesnt return things in the order entered and the order of the
# cmds is important (show version first and write term last). pita
@commands=(
- "show version",
- "show hardware",
- "show redundancy secondary",
- "show idprom backplane",
- "show install active",
- "show env all",
- "show rsp chassis-info",
- "show gsr chassis",
- "show boot",
- "show bootvar",
- "show variables boot",
- "show flash",
- "dir /all nvram:",
- "dir /all bootflash:",
- "dir /all slot0:",
- "dir /all disk0:",
- "dir /all slot1:",
- "dir /all disk1:",
- "dir /all slot2:",
- "dir /all disk2:",
- "dir /all harddisk:",
- "dir /all harddiska:",
- "dir /all harddiskb:",
- "dir /all sup-bootflash:",
- "dir /all sup-microcode:",
- "dir /all slavenvram:",
- "dir /all slavebootflash:",
- "dir /all slaveslot0:",
- "dir /all slavedisk0:",
- "dir /all slaveslot1:",
- "dir /all slavedisk1:",
- "dir /all slaveslot2:",
- "dir /all slavedisk2:",
- "dir /all slavesup-bootflash:",
- "dir /all sec-nvram:",
- "dir /all sec-bootflash:",
- "dir /all sec-slot0:",
- "dir /all sec-disk0:",
- "dir /all sec-slot1:",
- "dir /all sec-disk1:",
- "dir /all sec-slot2:",
- "dir /all sec-disk2:",
- "show controllers",
- "show controllers cbus",
- "show diagbus",
- "show diag",
- "show module",
- "show spe version",
- "show c7200",
- "show vtp status",
- "show vlan",
- "show failover",
- "show running-config",
- "write term"
+ "b version",
+ "b global show",
+ "cat /config/bigip.license",
+ "b list"
);
+
$cisco_cmds=join(";",@commands);
$cmds_regexp=join("|",@commands);
@@ -1612,49 +226,43 @@
print STDOUT "opening file $host\n" if ($log);
open(INPUT,"<$host") || die "open failed for $host: $!\n";
} else {
- print STDERR "executing clogin -t $timeo -c\"$cisco_cmds\" $host\n" if ($debug);
- print STDOUT "executing clogin -t $timeo -c\"$cisco_cmds\" $host\n" if ($log);
+ print STDERR "executing f5login -t $timeo -c\"$cisco_cmds\" $host\n" if ($debug);
+ print STDOUT "executing f5login -t $timeo -c\"$cisco_cmds\" $host\n" if ($log);
if (defined($ENV{NOPIPE})) {
- system "clogin -t $timeo -c \"$cisco_cmds\" $host $host.raw 2>&1" || die "clogin failed for $host: $!\n";
- open(INPUT, "< $host.raw") || die "clogin failed for $host: $!\n";
+ system "f5login -t $timeo -c \"$cisco_cmds\" $host $host.raw 2>&1" || die "f5login failed for $host: $!\n";
+ open(INPUT, "< $host.raw") || die "f5login failed for $host: $!\n";
} else {
- open(INPUT,"clogin -t $timeo -c \"$cisco_cmds\" $host ) {
tr/\015//d;
- if (/[>#]\s?exit$/) {
+ if (/^.*logout$/) {
$clean_run=1;
last;
}
if (/^Error:/) {
- print STDOUT ("$host clogin error: $_");
- print STDERR ("$host clogin error: $_") if ($debug);
+ print STDOUT ("$host f5login error: $_");
+ print STDERR ("$host f5login error: $_") if ($debug);
$clean_run=0;
last;
}
- while (/#\s*($cmds_regexp)\s*$/) {
+ while (/\s*($cmds_regexp)\s*$/) {
$cmd = $1;
if (!defined($prompt)) {
- $prompt = ($_ =~ /^([^#]+#)/)[0];
- $prompt =~ s/([][}{)(\\])/\\$1/g;
- print STDERR ("PROMPT MATCH: $prompt\n") if ($debug);
- }
+ $prompt = ($_ =~ /^([^:]+:)/)[0];
+ }
print STDERR ("HIT COMMAND:$_") if ($debug);
if (! defined($commands{$cmd})) {
print STDERR "$host: found unexpected command - \"$cmd\"\n";
@@ -1681,12 +289,12 @@
}
# check for completeness
-if (scalar(%commands) || !$clean_run || !$found_end) {
+if (scalar(%commands) || !$clean_run ) {
if (scalar(%commands)) {
printf(STDOUT "$host: missed cmd(s): %s\n", join(',', keys(%commands)));
printf(STDERR "$host: missed cmd(s): %s\n", join(',', keys(%commands))) if ($debug);
}
- if (!$clean_run || !$found_end) {
+ if (!$clean_run ) {
print STDOUT "$host: End of run not found\n";
print STDERR "$host: End of run not found\n" if ($debug);
system("/usr/bin/tail -1 $host.new");