172.16.27.44
spawn telnet 172.16.27.44
Trying 172.16.27.44...
Connected to 172.16.27.44.
Escape character is '^]'.


Cisco Systems, Inc. Console




Username: !!!!!


Password: 

S_CentStaSW3_2948G (enable) 

S_CentStaSW3_2948G (enable) term length 0

Unknown command "term". Use 'help' for more info.
S_CentStaSW3_2948G (enable)  show version

WS-C2948 Software, Version NmpSW: 5.5(7)
Copyright (c) 1995-2001 by Cisco Systems, Inc.
NMP S/W compiled on Apr  2 2001, 17:08:13
GSP S/W compiled on Apr 02 2001, 15:08:32

System Bootstrap Version: 6.1(4)

Hardware Version: 2.4  Model: WS-C2948  Serial #: JAE05420560

Mod Port Model      Serial #              Versions
--- ---- ---------- -------------------- ---------------------------------
1   0    WS-X2948   JAE05420560          Hw : 2.4
                                         Gsp: 5.5(7.0)
                                         Nmp: 5.5(7)
2   50   WS-C2948G  JAE05420560          Hw : 2.4

       DRAM                    FLASH                   NVRAM
Module Total   Used    Free    Total   Used    Free    Total Used  Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1       65536K  26755K  38781K  12288K   4716K   7572K  480K  171K  309K

Uptime is 432 days, 14 hours, 44 minutes
S_CentStaSW3_2948G (enable) show module

Mod Slot Ports Module-Type               Model               Sub Status
--- ---- ----- ------------------------- ------------------- --- --------
1   1    0     Switching Supervisor      WS-X2948            no  ok
2   1    50    10/100/1000 Ethernet      WS-C2948G           no  ok

Mod Module-Name         Serial-Num
--- ------------------- --------------------
1                       JAE05420560         
2                       JAE05420560         

Mod MAC-Address(es)                        Hw     Fw         Sw
--- -------------------------------------- ------ ---------- -----------------
1   00-05-74-4b-f0-00 to 00-05-74-4b-f3-ff 2.4    6.1(4)     5.5(7)
2   00-05-74-4b-f3-9e to 00-05-74-4b-f3-fd 2.4   
S_CentStaSW3_2948G (enable) show inventory raw

Unknown command "show inventory".  Use 'show help' for more info.
S_CentStaSW3_2948G (enable) show port ifindex


Port   ifIndex
-----  -------
 2/1   9
 2/2   10
 2/3   11
 2/4   12
 2/5   13
 2/6   14
 2/7   15
 2/8   16
 2/9   17
 2/10  18
 2/11  19
 2/12  20
 2/13  21
 2/14  22
 2/15  23
 2/16  24
 2/17  25
 2/18  26
 2/19  27
 2/20  28
 2/21  29
 2/22  30
 2/23  31
 2/24  32
 2/25  33
 2/26  34
 2/27  35
 2/28  36
 2/29  37
 2/30  38
 2/31  39
 2/32  40
 2/33  41
 2/34  42
 2/35  43
 2/36  44
 2/37  45
 2/38  46
 2/39  47
 2/40  48
 2/41  49
 2/42  50
 2/43  51
 2/44  52
 2/45  53
 2/46  54
 2/47  55
 2/48  56
 2/49  57
 2/50  58
S_CentStaSW3_2948G (enable) write term all

.......
...............
..................
..

begin
!
# ***** ALL (DEFAULT and NON-DEFAULT) CONFIGURATION *****
!
!
#time: Tue Mar 28 2006, 06:11:30 
!
#version 5.5(7)
!
!
#system web interface version(s)
set password $2$bAk8$r3UONW0.p7ieaFjPnOvgc.
set enablepass $2$2E5u$7Y1KnMqbxewu37tZ4KPAk1
set prompt S_CentStaSW3_2948G
set length 24 default
set logout 20
set banner motd ^C^C
!
#errordetection
set errordetection inband disable
set errordetection memory disable
!
#system
set system baud  9600
set system modem disable
set system name  S_CentStaSW3_2948G
set system location 
set system contact  
set system countrycode 
set traffic monitor 100
!
#frame distribution method
set port channel all distribution mac both
!
#snmp
set snmp community read-only      m1ck3y
set snmp community read-write     F1VE9S
set snmp community read-write-all secret
set snmp rmon disable
set snmp trap disable module
set snmp trap disable chassis
set snmp trap disable bridge
set snmp trap disable repeater
set snmp trap disable vtp
set snmp trap disable auth
set snmp trap disable ippermit
set snmp trap disable vmps
set snmp trap disable entity
set snmp trap disable config
set snmp trap disable stpx
set snmp trap disable syslog
!
#tacacs+
set tacacs server 172.16.200.2 primary
set tacacs attempts 3
set tacacs directedrequest disable
set tacacs key secret12345
set tacacs timeout 15
!
#radius
set radius server 172.16.200.110 auth-port 1812 acct-port 1813 primary
set radius deadtime 0
set radius timeout 2
set radius retransmit 1
set radius key keyr1ng$
!
#kerberos
!
#authentication
set authentication login tacacs disable console 
set authentication login tacacs disable telnet 
set authentication login tacacs disable http 
set authentication enable tacacs disable console 
set authentication enable tacacs disable telnet 
set authentication enable tacacs disable http 
set authentication login radius enable console primary
set authentication login radius enable telnet primary
set authentication login radius enable http primary
set authentication enable radius enable console primary
set authentication enable radius enable telnet primary
set authentication enable radius enable http primary
set authentication login local enable console 
set authentication login local enable telnet 
set authentication login local enable http 
set authentication enable local enable console 
set authentication enable local enable telnet 
set authentication enable local enable http 
set authentication login kerberos disable console 
set authentication login kerberos disable telnet 
set authentication login kerberos disable http 
set authentication enable kerberos disable console 
set authentication enable kerberos disable telnet 
set authentication enable kerberos disable http 
!
#vtp
set vtp domain PTC-IT
set vtp mode transparent
set vtp v2 disable
set vtp pruneeligible 2-1000
clear vtp pruning 1001-1005
set vlan 1 name default type ethernet mtu 1500 said 100001 state active 
set vlan 27 name NetMgmt type ethernet mtu 1500 said 100027 state active 
set vlan 46 name Production type ethernet mtu 1500 said 100046 state active 
set vlan 47 name Admin type ethernet mtu 1500 said 100047 state active 
set vlan 1002 name fddi-default type fddi mtu 1500 said 101002 state active 
set vlan 1004 name fddinet-default type fddinet mtu 1500 said 101004 state active stp ieee 
set vlan 1005 name trnet-default type trbrf mtu 1500 said 101005 state active stp ibm 
set vlan 1003 name token-ring-default type trcrf mtu 1500 said 101003 state active mode srb aremaxhop 7 stemaxhop 7 backupcrf off 
!
#ip
set feature mdg enable
set feature psync-recovery no-powerdown
set interface sc0 27 172.16.27.44/255.255.255.0 172.16.27.255

set interface sc0 up
set interface sl0 0.0.0.0 0.0.0.0
set interface sl0 down
set interface me1 0.0.0.0 0.0.0.0 0.0.0.0

set interface me1 down
set arp agingtime 1200
set ip redirect   enable
set ip unreachable   enable
set ip fragmentation enable
set ip route 0.0.0.0/0.0.0.0         172.16.27.1    
set ip alias default         0.0.0.0
!
#command alias
!
#vmps
set vmps server retry 3
set vmps server reconfirminterval 60
!
#rcp
set rcp username 
!
#dns
set ip dns disable
!
#spantree
#uplinkfast groups
set spantree uplinkfast disable
#backbonefast
set spantree backbonefast disable
#portfast
set spantree portfast bpdu-guard disable
#vlan 1
set spantree enable     1
set spantree fwddelay 15    1
set spantree hello    2     1
set spantree maxage   20    1
set spantree priority 32768 1
#vlan 27
set spantree enable     27
set spantree fwddelay 15    27
set spantree hello    2     27
set spantree maxage   20    27
set spantree priority 32768 27
#vlan 46
set spantree enable     46
set spantree fwddelay 15    46
set spantree hello    2     46
set spantree maxage   20    46
set spantree priority 32768 46
#vlan 47
set spantree enable     47
set spantree fwddelay 15    47
set spantree hello    2     47
set spantree maxage   20    47
set spantree priority 32768 47
#vlan 1003
set spantree enable     1003
set spantree fwddelay 4     1003
set spantree hello    2     1003
set spantree maxage   10    1003
set spantree priority 32768 1003
#vlan 1005
set spantree enable     1005
set spantree fwddelay 4     1005
set spantree hello    2     1005
set spantree maxage   10    1005
set spantree priority 32768 1005
!
#cgmp
set cgmp disable
set cgmp leave disable
!
#syslog
set logging console disable
set logging server disable
set logging level cdp 4 default
set logging level mcast 2 default
set logging level dtp 5 default
set logging level earl 2 default
set logging level ip 2 default
set logging level pruning 2 default
set logging level snmp 2 default
set logging level spantree 2 default
set logging level sys 5 default
set logging level tac 2 default
set logging level tcp 2 default
set logging level telnet 2 default
set logging level tftp 2 default
set logging level vtp 2 default
set logging level kernel 2 default
set logging level filesys 2 default
set logging level pagp 5 default
set logging level mgmt 5 default
set logging level mls 5 default
set logging level protfilt 2 default
set logging level security 2 default
set logging level radius 2 default
set logging level udld 4 default
set logging level gvrp 2 default
set logging level cops 2 default
set logging level qos 3 default
set logging server facility LOCAL7
set logging server severity 4
set logging timestamp enable
set logging buffer 500
set logging history 1
!
#ntp
set ntp broadcastclient disable
set ntp broadcastdelay 3000
set ntp client disable
set ntp authentication disable
clear timezone
set summertime disable 
set summertime recurring
!
#set boot command
set boot config-register 0x2
set boot config-register auto-config overwrite
set boot config-register auto-config sync disable
set boot system flash bootflash:cat4000.5-5-7.bin
!
#permit list
set ip permit disable telnet
set ip permit disable snmp
!
#permanent arp entries
!
#protocolfilter
set protocolfilter disable
!
#standby ports
set standbyports disable
!
#vlan mapping
!
#gmrp
set gmrp disable
!
#garp
set garp timer all 200 600 10000
!
#cdp
set cdp interval 60
set cdp holdtime 180
set cdp enable
set cdp version v2
!
#qos
set qos disable
set qos defaultcos 0
set qos map 2q1t 1 1 cos 0-1
set qos map 2q1t 1 1 cos 2-3
set qos map 2q1t 1 1 cos 4-5
set qos map 2q1t 1 1 cos 6-7
!
#mls multicast
set mls multicast disable
!
#udld
set udld disable
set udld interval 15
!
#port channel
set port channel 2/1-2 32
set port channel 2/3-4 111
set port channel 2/5-8 112
set port channel 2/9-12 113
set port channel 2/13-16 114
set port channel 2/17-20 115
set port channel 2/21-24 116
set port channel 2/25-28 117
set port channel 2/29-32 118
set port channel 2/33-36 119
set port channel 2/37-40 120
set port channel 2/41-44 121
set port channel 2/45-48 122
set port channel 2/49-50 123
!
#accounting
set accounting exec disable
set accounting connect disable
set accounting system disable
set accounting commands disable
set accounting suppress null-username disable
set accounting update new-info 
!
#errdisable timeout
set errdisable-timeout disable other
set errdisable-timeout disable udld
set errdisable-timeout disable duplex-mismatch
set errdisable-timeout disable bpdu-guard
set errdisable-timeout disable channel-misconfig
set errdisable-timeout interval 300
!
#http configuration
set ip http server disable
set ip http port 80
!
#module 1 : 0-port Switching Supervisor
set module name    1    
!
#module 2 : 50-port 10/100/1000 Ethernet
set module name    2    
set module enable  2
set vlan 1    2/1-2,2/25-28,2/31-32,2/47-48,2/50
set vlan 27   2/29-30,2/49
set vlan 46   2/3-24,2/37-46
set vlan 47   2/33-36
set port auxiliaryvlan 2/1-50 none
set port qos 2/1-50 trust-ext untrusted
set port qos 2/1-50 cos-ext 0
set port enable     2/1-50
set port level      2/1-50  normal
set port speed      2/4-46  auto
set port speed      2/1-3,2/47-48  100
set port duplex     2/1-3,2/47-48  full
set port trap       2/1-50  disable
set port name       2/1  trk to 2948(27.46)
set port name       2/2  trk to 2948(27.46)
set port name       2/3  CentSta1_5500(6/17)
set port name       2/29 S_CentSta_AIScout
set port name       2/47 trk to 2924(27.45)
set port name       2/48 trk to 2924(27.47)
set port name       2/4-28,2/30-46,2/49-50
set port security 2/1-50 disable age 0 maximum 1 shutdown 0 violation shutdown
set port membership 2/1-50  static
set port protocol 2/1-50 ip on
set port protocol 2/1-50 ipx auto
set port protocol 2/1-50 group auto
set cdp enable   2/1-50
set udld enable 2/1-48 
set udld disable 2/49-50 
set udld aggressive-mode disable 2/1-50 
clear trunk 2/1  27
set trunk 2/1  on dot1q 1-26,28-1005
clear trunk 2/2  27
set trunk 2/2  on dot1q 1-26,28-1005
set trunk 2/3  auto dot1q 1-1005
set trunk 2/4  auto dot1q 1-1005
set trunk 2/5  auto dot1q 1-1005
set trunk 2/6  auto dot1q 1-1005
set trunk 2/7  auto dot1q 1-1005
set trunk 2/8  auto dot1q 1-1005
set trunk 2/9  auto dot1q 1-1005
set trunk 2/10 auto dot1q 1-1005
set trunk 2/11 auto dot1q 1-1005
set trunk 2/12 auto dot1q 1-1005
set trunk 2/13 auto dot1q 1-1005
set trunk 2/14 auto dot1q 1-1005
set trunk 2/15 auto dot1q 1-1005
set trunk 2/16 auto dot1q 1-1005
set trunk 2/17 auto dot1q 1-1005
set trunk 2/18 auto dot1q 1-1005
set trunk 2/19 auto dot1q 1-1005
set trunk 2/20 auto dot1q 1-1005
set trunk 2/21 auto dot1q 1-1005
set trunk 2/22 auto dot1q 1-1005
set trunk 2/23 auto dot1q 1-1005
set trunk 2/24 auto dot1q 1-1005
set trunk 2/25 auto dot1q 1-1005
set trunk 2/26 auto dot1q 1-1005
set trunk 2/27 auto dot1q 1-1005
set trunk 2/28 auto dot1q 1-1005
set trunk 2/29 auto dot1q 1-1005
set trunk 2/30 auto dot1q 1-1005
set trunk 2/31 auto dot1q 1-1005
set trunk 2/32 auto dot1q 1-1005
set trunk 2/33 auto dot1q 1-1005
set trunk 2/34 auto dot1q 1-1005
set trunk 2/35 auto dot1q 1-1005
set trunk 2/36 auto dot1q 1-1005
set trunk 2/37 auto dot1q 1-1005
set trunk 2/38 auto dot1q 1-1005
set trunk 2/39 auto dot1q 1-1005
set trunk 2/40 auto dot1q 1-1005
set trunk 2/41 auto dot1q 1-1005
set trunk 2/42 auto dot1q 1-1005
set trunk 2/43 auto dot1q 1-1005
set trunk 2/44 auto dot1q 1-1005
set trunk 2/45 auto dot1q 1-1005
set trunk 2/46 auto dot1q 1-1005
clear trunk 2/47 27
set trunk 2/47 on dot1q 1-26,28-1005
clear trunk 2/48 27
set trunk 2/48 on dot1q 1-26,28-1005
set trunk 2/49 auto dot1q 1-1005
set trunk 2/50 auto dot1q 1-1005
set spantree portfast    2/1-50 disable
set spantree portcost    2/1-9,2/11-16,2/18,2/20-21,2/23-24,2/29-30,2/37-38,2/40,2/46-48  19
set spantree portcost    2/10,2/17,2/19,2/22,2/25-28,2/31-36,2/39,2/41-45  100
set spantree portcost    2/49-50  4
set spantree portpri     2/1-50  32
set spantree portvlanpri 2/1  0
set spantree portvlanpri 2/2  0
set spantree portvlanpri 2/3  0
set spantree portvlanpri 2/4  0
set spantree portvlanpri 2/5  0
set spantree portvlanpri 2/6  0
set spantree portvlanpri 2/7  0
set spantree portvlanpri 2/8  0
set spantree portvlanpri 2/9  0
set spantree portvlanpri 2/10 0
set spantree portvlanpri 2/11 0
set spantree portvlanpri 2/12 0
set spantree portvlanpri 2/13 0
set spantree portvlanpri 2/14 0
set spantree portvlanpri 2/15 0
set spantree portvlanpri 2/16 0
set spantree portvlanpri 2/17 0
set spantree portvlanpri 2/18 0
set spantree portvlanpri 2/19 0
set spantree portvlanpri 2/20 0
set spantree portvlanpri 2/21 0
set spantree portvlanpri 2/22 0
set spantree portvlanpri 2/23 0
set spantree portvlanpri 2/24 0
set spantree portvlanpri 2/25 0
set spantree portvlanpri 2/26 0
set spantree portvlanpri 2/27 0
set spantree portvlanpri 2/28 0
set spantree portvlanpri 2/29 0
set spantree portvlanpri 2/30 0
set spantree portvlanpri 2/31 0
set spantree portvlanpri 2/32 0
set spantree portvlanpri 2/33 0
set spantree portvlanpri 2/34 0
set spantree portvlanpri 2/35 0
set spantree portvlanpri 2/36 0
set spantree portvlanpri 2/37 0
set spantree portvlanpri 2/38 0
set spantree portvlanpri 2/39 0
set spantree portvlanpri 2/40 0
set spantree portvlanpri 2/41 0
set spantree portvlanpri 2/42 0
set spantree portvlanpri 2/43 0
set spantree portvlanpri 2/44 0
set spantree portvlanpri 2/45 0
set spantree portvlanpri 2/46 0
set spantree portvlanpri 2/47 0
set spantree portvlanpri 2/48 0
set spantree portvlanpri 2/49 0
set spantree portvlanpri 2/50 0
set spantree portvlancost 2/1  cost 18
set spantree portvlancost 2/2  cost 18
set spantree portvlancost 2/3  cost 18
set spantree portvlancost 2/4  cost 18
set spantree portvlancost 2/5  cost 18
set spantree portvlancost 2/6  cost 18
set spantree portvlancost 2/7  cost 18
set spantree portvlancost 2/8  cost 18
set spantree portvlancost 2/9  cost 18
set spantree portvlancost 2/10 cost 99
set spantree portvlancost 2/11 cost 18
set spantree portvlancost 2/12 cost 18
set spantree portvlancost 2/13 cost 18
set spantree portvlancost 2/14 cost 18
set spantree portvlancost 2/15 cost 18
set spantree portvlancost 2/16 cost 18
set spantree portvlancost 2/17 cost 99
set spantree portvlancost 2/18 cost 18
set spantree portvlancost 2/19 cost 99
set spantree portvlancost 2/20 cost 18
set spantree portvlancost 2/21 cost 18
set spantree portvlancost 2/22 cost 99
set spantree portvlancost 2/23 cost 18
set spantree portvlancost 2/24 cost 18
set spantree portvlancost 2/25 cost 99
set spantree portvlancost 2/26 cost 99
set spantree portvlancost 2/27 cost 99
set spantree portvlancost 2/28 cost 99
set spantree portvlancost 2/29 cost 18
set spantree portvlancost 2/30 cost 18
set spantree portvlancost 2/31 cost 99
set spantree portvlancost 2/32 cost 99
set spantree portvlancost 2/33 cost 99
set spantree portvlancost 2/34 cost 99
set spantree portvlancost 2/35 cost 99
set spantree portvlancost 2/36 cost 99
set spantree portvlancost 2/37 cost 18
set spantree portvlancost 2/38 cost 18
set spantree portvlancost 2/39 cost 99
set spantree portvlancost 2/40 cost 18
set spantree portvlancost 2/41 cost 99
set spantree portvlancost 2/42 cost 99
set spantree portvlancost 2/43 cost 99
set spantree portvlancost 2/44 cost 99
set spantree portvlancost 2/45 cost 99
set spantree portvlancost 2/46 cost 18
set spantree portvlancost 2/47 cost 18
set spantree portvlancost 2/48 cost 18
set spantree portvlancost 2/49 cost 3
set spantree portvlancost 2/50 cost 3
set port gvrp     2/1-50  disable
set gvrp registration normal   2/1-50
set gvrp applicant normal   2/1-50
set port gmrp   2/1-50  enable
set gmrp registration normal   2/1-50
set gmrp fwdall disable    2/1-50
set port channel 2/1-2 mode on
set port channel 2/3-50 mode auto silent
!
#switch port analyzer
!
#cam
set cam agingtime 1,27,46-47,1003,1005 300
!
#gvrp
set gvrp dynamic-vlan-creation disable
set gvrp disable
!
#authorization
set authorization exec disable console
set authorization exec disable telnet
set authorization enable disable console
set authorization enable disable telnet
set authorization commands disable console
set authorization commands disable telnet
end
S_CentStaSW3_2948G (enable) write term

This command shows non-default configurations only.
Use 'write terminal all' to show both default and non-default configurations.
.......

..................
..

begin
!
# ***** NON-DEFAULT CONFIGURATION *****
!
!
#time: Tue Mar 28 2006, 06:11:48 
!
#version 5.5(7)
!
!
#system web interface version(s)
set password $2$bAk8$r3UONW0.p7ieaFjPnOvgc.
set enablepass $2$2E5u$7Y1KnMqbxewu37tZ4KPAk1
set prompt S_CentStaSW3_2948G
!
#system
set system name  S_CentStaSW3_2948G
!
#frame distribution method
set port channel all distribution mac both
!
#snmp
set snmp community read-only      m1ck3y
set snmp community read-write     F1VE9S
!
#tacacs+
set tacacs server 172.16.200.2 primary
set tacacs key secret12345
set tacacs timeout 15
!
#radius
set radius server 172.16.200.110 auth-port 1812 acct-port 1813 primary
set radius timeout 2
set radius retransmit 1
set radius key keyr1ng$
!
#authentication
set authentication login radius enable console primary
set authentication login radius enable telnet primary
set authentication login radius enable http primary
set authentication enable radius enable console primary
set authentication enable radius enable telnet primary
set authentication enable radius enable http primary
!
#vtp
set vtp domain PTC-IT
set vtp mode transparent
set vlan 1 name default type ethernet mtu 1500 said 100001 state active 
set vlan 27 name NetMgmt type ethernet mtu 1500 said 100027 state active 
set vlan 46 name Production type ethernet mtu 1500 said 100046 state active 
set vlan 47 name Admin type ethernet mtu 1500 said 100047 state active 
set vlan 1002 name fddi-default type fddi mtu 1500 said 101002 state active 
set vlan 1004 name fddinet-default type fddinet mtu 1500 said 101004 state active stp ieee 
set vlan 1005 name trnet-default type trbrf mtu 1500 said 101005 state active stp ibm 
set vlan 1003 name token-ring-default type trcrf mtu 1500 said 101003 state active mode srb aremaxhop 7 stemaxhop 7 backupcrf off 
!
#ip
set interface sc0 27 172.16.27.44/255.255.255.0 172.16.27.255

set interface sl0 down
set interface me1 down
set ip route 0.0.0.0/0.0.0.0         172.16.27.1    
!
#syslog
set logging console disable
set logging level cops 2 default
!
#set boot command
set boot config-register 0x2
set boot system flash bootflash:cat4000.5-5-7.bin
!
#port channel
set port channel 2/1-2 32
!
#module 1 : 0-port Switching Supervisor
!
#module 2 : 50-port 10/100/1000 Ethernet
set vlan 27   2/29-30,2/49
set vlan 46   2/3-24,2/37-46
set vlan 47   2/33-36
set port speed      2/1-3,2/47-48  100
set port duplex     2/1-3,2/47-48  full
set port name       2/1  trk to 2948(27.46)
set port name       2/2  trk to 2948(27.46)
set port name       2/3  CentSta1_5500(6/17)
set port name       2/29 S_CentSta_AIScout
set port name       2/47 trk to 2924(27.45)
set port name       2/48 trk to 2924(27.47)
set udld enable 2/1-48 
set udld disable 2/49-50 
clear trunk 2/1  27
set trunk 2/1  on dot1q 1-26,28-1005
clear trunk 2/2  27
set trunk 2/2  on dot1q 1-26,28-1005
clear trunk 2/47 27
set trunk 2/47 on dot1q 1-26,28-1005
clear trunk 2/48 27
set trunk 2/48 on dot1q 1-26,28-1005
set port channel 2/1-2 mode on
end
S_CentStaSW3_2948G (enable) show running-config

Unknown command "show running-config".  Use 'show help' for more info.
S_CentStaSW3_2948G (enable)exit

Connection to 172.16.27.44 closed by foreign host.