[rancid] Unable to figure out "end of run not found"

[Kevin Morales]

ok, but  rancid do not save the output of command.,

How I can fix this problem?

On Wed, Jul 3, 2019 at 11:12 AM john heasley <heas at shrubbery.net> wrote:

> Wed, Jul 03, 2019 at 07:48:09AM -0600, Kevin Morales:
> > Hello!,
> >
> > How I can fix the problem when I run rancid for ZTE Router?. I get this
> > error: *End of run not found*
> >
> > the two file 172.17.1.6.new and 172.17.1.6.raw don't show any error!.
> >
> > NOPIPE=yes ./rancid -d -t cisco 172.17.1.6
> >
> > loadtype: device type cisco
> > loadtype: found device type cisco in
> /usr/local/rancid/etc/rancid.types.base
> > executing clogin -t 90 -c"show version;show install active;show vlan;show
> > running-config" 172.17.1.6
> > PROMPT MATCH: RT-ZTE#
> > HIT COMMAND: RT-ZTE  #show version
> >     In ShowVersion:  RT-ZTE  #show version
> > HIT COMMAND: RT-ZTE  #show install active
> >     In ShowInstallActive:  RT-ZTE  #show install active
> > HIT COMMAND: RT-ZTE  #show vlan
> >     In ShowVLAN:  RT-ZTE  #show vlan
> > HIT COMMAND: RT-ZTE  #show running-config
> >     In WriteTerm:  RT-ZTE  #show running-config
> > *172.17.1.6 <http://172.17.1.6>: End of run not found*
> > 172.17.1.6: clean_run is false
> > 172.17.1.6: found_end is false
> > !</isis>
>
> found end means that it found the end of the config; for type cisco,
> that means "^end".
>
> clean run means that it found the cli logout; for type cisco, that
> means "prompt[>#] exit$"
>
>

-- 
*Kevin Morales*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20190703/660dbc9b/attachment.html>