[rancid] Alcatel script, not parsing the commands and/or output well (/partially)

[heasley]

Thu, Jan 17, 2019 at 08:07:02AM +0100, Remko Lodder:
> Hi,
> 
> I also have “3.99.99” on the system to compare the output. The regular version on the system is 3.6 it seems.
> But, the noklogin works after modifying the u_prompt and p_prompt. When running rancid -d -t sros <devicename>
> it wants to execute commands that are not available at all on the Alcatel.
> 
> The ones that I use from Burgalio’s :
> 
>         {'show chassis'                 => 'ShowChassis'},
>         {'show system'                  => 'ShowSystem'},
>         {'show module'                  => 'ShowModule'},
>         {'show stack topology'          => 'ShowStackTopolgy'},
>         {'show lanpower 1'              => 'ShowLanPower'},
>         {'show lanpower 2'              => 'ShowLanPower'},
>         {'show user'                    => 'ShowUser'},
>         {'ls'                           => 'GenericParse'},
>         {'ls certified/'                => 'GenericParse'},
>         {'ls working/'                  => 'GenericParse'},
>         {'ls switch/'                   => 'GenericParse'},
>         {'ls network/'                  => 'GenericParse'},
>         {'show vlan'                    => 'ShowVLAN'},
>         {'show interfaces status'       => 'ShowInterfaces'},
>         {'show running'                 => 'ShowConf'},
>         {'show configuration snapshot'  => 'ShowConf’},
> 
> which does not match:
> 
> xecuting noklogin -t 90 -c"show system information;file type bootlog.txt;show redundancy synchronization;show chassis;show chassis environment;show chassis power-supply;show chassis power-management;show card state;show card detail;show debug;show bof;admin display-config index;admin display-config” <devicename>
> 
> Do note that it seems that the SROS is on a very different architecture based then what my Omniswitches use. So it seems incompatible to start with, where the alu* scripts might not entirely work with every command on the OS6000 that I have, but most of them are accepted in older (legacy) components but also on the newer
> versions.

testing & dev was done with 7750.  I will enquire with my nokia contact
about the omniswitch.

> Thanks
> Remko
> 
> > On 16 Jan 2019, at 18:39, heasley <heas at shrubbery.net> wrote:
> > 
> > Wed, Jan 16, 2019 at 12:02:14PM +0100, Remko Lodder:
> >> Hi all,
> >> 
> >> First of all, thank you for Rancid, it’s a great tool to monitor configuration changes and pushing back changes.
> >> 
> >> Having Said that;
> >> 
> >> I fetched some alcatel switches which I modified a little to work on various types . These changes are trivial
> >> changes from upstream so no real changes there actually.
> >> 
> >> It seems that most switches work just fine, but that one particular switch is not able to keep up  with the
> >> requests. It seems that this specific switch misses commands (like ls and show interface status).
> >> If I look back in the raw output it appears to miss characters:
> >> 
> >> # how interfaces status
> >>                  ^
> >> ERROR: Invalid entry: “how”
> >> 
> >> The same goes for ls, where ’s' is the command being send. Or for exit at the end which is send as “xit”.
> >> 
> >> The scripts are from: https://github.com/buraglio/alurancid (Thanks buraglio) and apart from one switch work
> >> fine it seems.
> >> 
> >> Switching from SSH to Telnet does not make a difference.
> >> Does someone have an suggestion on where to look?
> > 
> > can you try the sros support that is in rancid 3.8 or the current alpha?
>