[rancid] Need Help
Heasley
heas at shrubbery.net
Sun Jul 9 21:16:53 UTC 2017
> Am 09.07.2017 um 00:38 schrieb Bipin Sharma <bipinsharma091 at gmail.com>:
>
> Any one Please help me on this isseu..
>
Sorry, 2.3.8 is no longer supported. Please upgrade.
>
> san-sw1.subisu.net.np: missed cmd(s): show running-config view full,write term,show running-configsan-sw1.subisu.net.np: missed cmd(s): show running-config view full,write term,show running-config
>
>> On Sat, Jul 8, 2017 at 10:47 PM, Bipin Sharma <bipinsharma091 at gmail.com> wrote:
>> Hi there,
>>
>>
>> I have configured rancid 2.3.8 and viewvc to view cvs file on my enterprise network but while getting the configs it shows the error. i.e
>>
>> switch1.x.x.x: missed cmd(s): show chassis alarms,show chassis hardware detail,show system license,show chassis scb,show chassis feb,show chassis routing-engine,show chassis firmware,show version detail,show chassis feb detail,show configuration,show system boot-messages,show chassis cfeb,show chassis clocks,show chassis sfm detail,show chassis ssb,show chassis fpc detail,show chassis environment,show system core-dumps
>> switch1.x.x.x: End of run not found
>>
>>
>> I even tried to rancid -d <switch-name> after that i get half configuration i.e
>>
>> !RANCID-CONTENT-TYPE: cisco
>> !
>> !Chassis type: WS-C2960CPD-8PT-L - a 2900XL switch
>> !CPU: PowerPC405
>> !
>> !Memory: main 131072K
>> !Serial Number: FOC1745Y2SP
>> !Model revision number : C0
>> !Model number : WS-C2960CPD-8PT-L
>> !Motherboard assembly number : 73-12988-06
>> !Motherboard serial number : FOC17448QAT
>> !Motherboard revision number : A0
>> !
>> !Processor ID: FOC1745Y2SP
>> !
>> !Power: Power Source Type Power(w) Mode
>> !
>> !Image: Software: C2960c405-UNIVERSALK9-M, 12.2(55)EX2, RELEASE SOFTWARE (fc1)
>> !Image: Compiled: Wed 18-May-11 13:53 by prod_rel_team
>> !Image: flash:/c2960c405-universalk9-mz.122-55.EX2/c2960c405-universalk9-mz.122-55.EX2.bin
>> !
>> !BOOTLDR: Version 12.2(55r)EX4, RELEASE SOFTWARE (fc1)
>> !
>> !
>> !Variable: BOOT path-list : flash:/c2960c405-universalk9-mz.122-55.EX2/c2960c405-universalk9-mz.122-55.EX2.bin
>> !Variable: Config file : flash:/config.text
>> !Variable: Private Config file : flash:/private-config.text
>> !Variable: Enable Break : no
>> !Variable: Manual Boot : no
>> !Variable: HELPER path-list :
>> !Variable: Auto upgrade : yes
>> !Variable: Auto upgrade path :
>> !Variable: NVRAM/Config file
>> !Variable: buffer size: 65536
>> !Variable: Timeout for Config
>> !Variable: Download: 0 seconds
>> !Variable: Config Download
>> !Variable: via DHCP: disabled (next boot: disabled)
>> !
>> !Flash: Directory of flash:/
>> !Flash: 4 -rwx 3576 Mar 9 1993 23:32:09 +00:00 config.text
>> !Flash: 5 -rwx 1915 Mar 9 1993 23:32:09 +00:00 private-config.text
>> !Flash: 6 drwx 512 Mar 1 1993 00:14:41 +00:00 c2960c405-universalk9-mz.122-55.EX2
>> !Flash: 59996160 bytes total (45029376 bytes free)
>> !
>> !Flash: nvram: Directory of nvram:/
>> !Flash: nvram: 57 -rw- 3576 <no date> startup-config
>> !Flash: nvram: 58 ---- 1915 <no date> private-config
>> !Flash: nvram: 1 ---- 35 <no date> persistent-data
>> !Flash: nvram: 2 -rw- 0 <no date> ifIndex-table
>> !Flash: nvram: 3 -rw- 597 <no date> IOS-Self-Sig#3838.cer
>> !Flash: nvram: 65536 bytes total (56921 bytes free)
>> !
>> !
>> !NAME: "1", DESCR: "WS-C2960CPD-8PT-L"
>> !PID: WS-C2960CPD-8PT-L
>> !VID: V01
>> !SN: FOC1745Y2SP
>> !NAME: "WS-C2960CPD-8PT-L - Sensor 0", DESCR: "WS-C2960CPD-8PT-L - Sensor 0"
>> !NAME: "WS-C2960CPD-8PT-L - Fixed Module 0", DESCR: "WS-C2960CPD-8PT-L - Fixed Module 0"
>> !NAME: "FastEthernet0/1", DESCR: "FastEthernet0/1"
>> !NAME: "FastEthernet0/2", DESCR: "FastEthernet0/2"
>> !NAME: "FastEthernet0/3", DESCR: "FastEthernet0/3"
>> !NAME: "FastEthernet0/4", DESCR: "FastEthernet0/4"
>> !NAME: "FastEthernet0/5", DESCR: "FastEthernet0/5"
>> !NAME: "FastEthernet0/6", DESCR: "FastEthernet0/6"
>> !NAME: "FastEthernet0/7", DESCR: "FastEthernet0/7"
>> !NAME: "FastEthernet0/8", DESCR: "FastEthernet0/8"
>> !NAME: "GigabitEthernet0/1", DESCR: "GigabitEthernet0/1"
>> !NAME: "GigabitEthernet0/2", DESCR: "GigabitEthernet0/2"
>> !
>> !VTP: VTP Version capable : 1 to 3
>> !VTP: VTP version running : 1
>> !VTP: VTP Domain Name :
>> !VTP: VTP Pruning Mode : Disabled
>> !VTP: VTP Traps Generation : Disabled
>> !VTP: Device ID : 5ca4.8a5f.8980
>> !VTP: Local updater ID is 172.22.8.76 on interface Vl63 (lowest numbered VLAN interface found)
>> !VTP: Feature VLAN:
>> !VTP: --------------
>> !VTP: VTP Operating Mode : Server
>> !VTP: Maximum VLANs supported locally : 255
>> !VTP: Number of existing VLANs : 7
>> !VTP: Configuration Revision : 2
>> !VTP: MD5 digest : 0x72 0xEB 0x10 0xEA 0x47 0x2B 0x07 0xE1
>> !VTP: 0x6A 0x8D 0xD2 0x9E 0x4A 0x99 0x42 0x5C
>> !
>> !VLAN: VLAN Name Status Ports
>> !VLAN: ---- -------------------------------- --------- -------------------------------
>> !VLAN: 1 default active Gi0/1, Gi0/2
>> !VLAN: 63 ***mgmt_vlan*** active Fa0/8
>> !VLAN: 748 soalti_nas1_atarkhel active Fa0/2, Fa0/3, Fa0/4, Fa0/5, Fa0/6, Fa0/7
>> !VLAN: 1002 fddi-default act/unsup
>> !VLAN: 1003 token-ring-default act/unsup
>> !VLAN: 1004 fddinet-default act/unsup
>> !VLAN: 1005 trnet-default act/unsup
>> !VLAN: VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
>> !VLAN: ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
>> !VLAN: 1 enet 100001 1500 - - - - - 0 0
>> !VLAN: 63 enet 100063 1500 - - - - - 0 0
>> !VLAN: 748 enet 100748 1500 - - - - - 0 0
>> !VLAN: 1002 fddi 101002 1500 - - - - - 0 0
>> !VLAN: 1003 tr 101003 1500 - - - - - 0 0
>> !VLAN: 1004 fdnet 101004 1500 - - - ieee - 0 0
>> !VLAN: 1005 trnet 101005 1500 - - - ibm - 0 0
>> !VLAN: Remote SPAN VLANs
>> !VLAN: ------------------------------------------------------------------------------
>> !VLAN: Primary Secondary Type Ports
>> !VLAN: ------- --------- ----------------- ------------------------------------------
>> !
>>
>>
>>
>> So Please help me to over come this error.. I have tried almost every thing to fix this bug but i failed in every way.. Hope you guys would help me and suggest me to work out..
>>
>>
>> regards.
>
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo/rancid-discuss
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20170709/a311d44a/attachment.html>
More information about the Rancid-discuss
mailing list