[rancid] Brocade TurboIron24

Nick Hilliard nick at foobar.org
Mon Aug 3 14:28:54 UTC 2015


Looks like a .cloginrc problem related to autoenable. 

Nick 

Sent from my iWotsit.

> On 3 Aug 2015, at 14:59, Pedrosi, Derek G. <pedrosi at millercanfield.com> wrote:
> 
> I’ve tried that to no success…
>  
> The bit of debugging that I can do yielded this…
>  
> root at rancid:/usr/lib/rancid/bin# flogin -t 300 -c "show version;show chassis;show module;show flash;show running-config" 10.1.1.3
> 10.1.1.3
> spawn ssh -c 3des -x -l svc_rancid 10.1.1.3
> svc_rancid at 10.1.1.3's password:
> SSH at DC-TurboIron2#
> Error: TIMEOUT reached
> root at rancid:/usr/lib/rancid/bin#
>  
> Rancid is able to logon, but no commands are issued?
>  
>  
> BUT, strangely enough when I do the same command as above with “clogin” it works as it should.
> BUT, if in my “router.db” I set the type to “cisco” (which I assume means use clogin) I do get a SVN entry in my repository, but it is blank.
>  
> Trying to get all of the configs.
> dc-turboiron2.network.mcps.com: found unexpected command - "dir /all sup-bootflash:"
> dc-turboiron2.network.mcps.com: missed cmd(s): dir /all slavedisk2:,show capture,dir /all sec-slot2:,show diag,dir /all sec-nvram:,show running-config view full,dir /all sec-bootflash:,sho$
> dc-turboiron2.network.mcps.com: End of run not found
> =====================================
>  
>  
>  
>  
> Ps Why do you suggest v7.4.00j
>  
>  
> Many thanks,
> derek
>  
>  
>  
> From: Nick Hilliard [mailto:nick at foobar.org]
> Sent: Sunday, August 2, 2015 9:15 AM
> To: Pedrosi, Derek G. <pedrosi at millercanfield.com>
> Cc: rancid-discuss at shrubbery.net
> Subject: Re: [rancid] Brocade TurboIron24
>  
> These are type: "foundry".
>  
>  
> 7.4.00j would be a good choice for software. 
>  
>  
> Nick
>  
> Sent from my iWotsit.
>  
> On 31 Jul 2015, at 19:11, Pedrosi, Derek G. <pedrosi at millercanfield.com> wrote:
> Greetings all,
> I have a few of Brocade’s TI24s in my environment.  I would like to intergrate them into Rancid with my Cisco gear, but I have not had any luck.  Can someone possibly point my in the right direction?
>  
>  
> Many thanx,
> derek
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo/rancid-discuss
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20150803/33578457/attachment.html>


More information about the Rancid-discuss mailing list