[rancid] RANCID is incorrectly parsing my Cisco IOS Firewall, adding linebreaks, joining lines, etc

[Lee]

looks like there was a change - Gi5/14 was added to vlan 1

lee

On 9/12/14, Jason Humes <JHumes at acs.on.ca> wrote:
> Here is an example;
>
> Index: configs/ core4506
> ===================================================================
> - -- configs/ core4506	(revision 198)
> @@ -446,9 +446,9 @@
>   !VLAN:                                                 Fa2/6, Fa2/7,
> Fa2/8, Fa2/10, Fa2/11, Fa2/13, Fa2/14, Fa2/15, Fa2/16, Fa2/17, Fa2/19
>   !VLAN:                                                 Fa2/20, Fa2/22,
> Fa2/23, Fa2/24, Fa2/29, Fa2/32, Fa2/33, Fa2/34, Fa2/40, Fa2/41
>   !VLAN:                                                 Fa2/42, Fa2/43,
> Fa2/44, Fa2/45, Fa2/46, Fa2/47, Fa2/48, Te3/1, Te3/2, Gi3/3, Gi3/4
> - !VLAN:                                                 Gi3/5, Gi3/6,
> Te4/1, Te4/2, Gi4/3, Gi4/4, Gi4/5, Gi4/6, Gi5/34, Gi6/5, Gi6/15
> - !VLAN:                                                 Gi6/18, Gi6/19,
> Gi6/20, Gi6/22, Gi6/23, Gi6/24, Gi6/28, Gi6/34, Gi6/35, Gi6/36
> - !VLAN:                                                 Gi6/37, Gi6/38,
> Gi6/39, Gi7/7, Gi7/8, Gi7/9, Gi7/10, Gi7/11, Gi7/12
> + !VLAN:                                                 Gi3/5, Gi3/6,
> Te4/1, Te4/2, Gi4/3, Gi4/4, Gi4/5, Gi4/6, Gi5/14, Gi5/34, Gi6/5
> + !VLAN:                                                 Gi6/15, Gi6/18,
> Gi6/19, Gi6/20, Gi6/22, Gi6/23, Gi6/24, Gi6/28, Gi6/34, Gi6/35
> + !VLAN:                                                 Gi6/36, Gi6/37,
> Gi6/38, Gi6/39, Gi7/7, Gi7/8, Gi7/9, Gi7/10, Gi7/11, Gi7/12
>   !VLAN: 2    Engineering                      active    Fa1/29, Fa1/32,
> Fa1/35, Fa1/44, Fa1/45, Fa1/47, Fa2/18, Gi5/15, Gi5/33, Gi6/32
>   !VLAN:                                                 Gi6/40
>   !VLAN: 3    EDM                              active
>
>
> Jason
>
> -----Original Message-----
> From: Jason Humes
> Sent: Friday, September 12, 2014 3:06 PM
> To: rancid-discuss at shrubbery.net
> Subject: RANCID is incorrectly parsing my Cisco IOS Firewall, adding
> linebreaks, joining lines, etc
>
> Hi
> Recently upgraded to RANCID 3.1 and I'm finding all our Cisco devices are
> coming up with new configs after every run due to rancid adding line breaks
> in some cases and in others it joins two lines of the config.
>
> Any thoughts on why this might be going on?  I'm running Ubuntu 14.04.
>
> Thanks
>
>
> Jason
>
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo/rancid-discuss
>