[rancid] Cisco clock warnings

[Kevin Bonner]

Hi Willie,

If you're getting the same email on every rancid run, I would suspect that 
your revision control system is having problems checking in that change.  Do 
the logs for that host / run indicate that rancid had trouble checking in the 
change to SVN (or CVS)?

-Kevin

On Tuesday, March 19, 2013 08:43:14 Willie Bollinger wrote:
> We recently installed some adsl cards in some cisco routers that we use
> for out of band management. Ever since we did this we get the following
> errors from rancid every time it runs.
> 
>    !
>    !Interface: FastEthernet0/0, AMD Am79c971
>    !	DTE Unknown (13) TX and RX clocks detected.
> - !	DTE Unknown (13) TX clock detected.
> + !	DTE Unknown (13) TX and RX clocks detected.
>    !
>    !Slot 0: fru C2620
>    !Slot 0: type C2620 1FE Mainboard, 4 ports
>    !Slot 0: hvers 6.0 rev B0
> 
> Is there a way to make rancid ignore these errors or has anybody come
> across a similar problem?