[rancid] missed cmds, but only when run from cron

[Paul Gear]

On 08/14/2013 02:20 PM, James Andrewartha wrote:
> On 14/08/13 12:05, Paul Gear wrote:
>> I'm seeing something very similar with one Mikrotik device out of 17 on
>> our network.  If run from the command line, it works fine.  If run from
>> cron, one router in the group fails, giving the following error log:
>
> I had the same problem with a script I'd adapted, the solution was to
> increase the timeout, as the device was quite slow to generate its config.

I'll try that and report back results.

Paul