[rancid] RANCID, CRS and SDR
Tyler J. Wagner
tyler at tolaris.com
Thu Dec 1 09:01:13 UTC 2011
I have the same problem with one of my Cisco Catalyst 6509, when querying
via telnet. It removes and adds hardware seemingly at whim. However, the
same behaviour is visible when testing with clogin myself - it seems to be
the real output.
I'd prefer to fix it, or have RANCID ignore it. Right now, I have neither
On 2011-12-01 08:28, Jens Link wrote:
> I'm having some problems with RANCID when querying CRS SDRs (Secure
> Domain Router). RANCID is running once an hour and every time RANCID
> finds some differences in the hardware configuration.
> Here is an example:
> This moring a 7 o'clock:
> - !NAME: "0/0/* - host - Inlet0", DESCR: "Temperature Sensor"
> - !VID: N/A
> - !NAME: "0/0/* - host - Inlet1", DESCR: "Temperature Sensor"
> And at 8 o'clock
> + !NAME: "0/0/* - host - Inlet0", DESCR: "Temperature Sensor"
> + !VID: N/A
> + !NAME: "0/0/* - host - Inlet1", DESCR: "Temperature Sensor"
> This is not on related to sensors, I've also seen fan trays, interface
> cards, ... appearing and disappearing. Any ideas? Querying the actual
> (hardware) CRS works fine.
"Complaining about ionizing radiation on your way to a plane flight is
like complaining about a TSA pat-down on your way to Caligula's palace."
-- Soren Ragsdale
More information about the Rancid-discuss