[rancid] Cisco

[john heasley]

Tue, Aug 02, 2011 at 10:21:16AM -0500, Adam Korab:
> Hi rancideers,
> 
> Just added a couple SAN switches (Cisco MDS 9216i, SAN-OS 3.3(3)) to
> rancid using the regular device type cisco and receive the below
> cycling outputs every hour:  What could cause this, a pager problem?
> FWIW I've already added 'term width 0' to the usual 'terminal length
> 0' in bin/clogin to address the VLAN membership line-wrap behavior.

it wasn't coded properly when the command was added to the ios code.
report it to the TAC and try a newer image or filter the line in the
rancid script.