[rancid] Re: A few small fixes for arancid and f5rancid
john heasley
heas at shrubbery.net
Wed Feb 10 17:50:55 UTC 2010
Wed, Feb 10, 2010 at 08:22:14AM +0100, Tore Anderson:
> Hey,
>
> the following patches to rancid 2.3.2 addresses these problems with
> f5rancid on a BIG-IP LTM 8900 running version 1.0.1 build 378:
>
> * The attribute Configsync.peerupdatedstatus is periodically changing
> its value without any user interaction. It appears that this is normal
> behaviour, so ignore this line to avoid diff-mails.
> * The reported fan speeds change slightly all the time, which causes
> unnecessary diff-mails. Strip them out.
i believe we already have these in the code base. please try the
attached version.
> and one problem with arancid on a HP 1:10Gb Ethernet Blade Switch
> version 5.0.4-Base:
>
> * User passwords are some kind of a secret hash that changes every time
> the configuration is dumped. Strip it out just like the admin password
> already is, to avoid diff-mails.
why did you change arancid for an hp switch? did you alter something or
not define the device as 'hp' in the router.db?
thanks
> Best regards,
> --
> Tore Anderson
> Redpill Linpro AS - http://www.redpill-linpro.com/
> Tel: +47 21 54 41 27
> --- arancid.orig 2010-02-10 08:07:58.000000000 +0100
> +++ arancid 2010-02-10 08:10:29.000000000 +0100
> @@ -205,7 +205,7 @@
> if (/(rcomm|wcomm|t1com|t2com)(\s+)(.*)/ && $filter_commstr) {
> ProcessHistory("","","","\/\*\t$1$2\"<removed>\"\n") && next;
> }
> - /^(\s+.{2,3}pw )\S+/ &&
> + /^(\s+(.{2,3}pw|pswd) )\S+/ &&
> ProcessHistory("","","","\/\*$1<removed>\n") && next;
>
> next if (/^\/\* Configuration dump taken/i);
> --- f5rancid.orig 2010-01-26 13:32:47.000000000 +0100
> +++ f5rancid 2010-02-01 14:06:13.000000000 +0100
> @@ -207,6 +207,7 @@
> }
> /UCS.LoadTime/ && next;
> /Configsync.LocalConfigTime/ && next;
> + /Configsync.peerupdatedstatus = (0|1)/ && next;
> /LTM.ConfigTime/ && next;
>
> if (/^(snmp\..*\.community\..* =) (.+)/i) {
> @@ -293,6 +294,7 @@
> /fan speed/i && next;
> /chassis temperature/i && next;
> /degC/ && next;
> + s/ - \d+rpm//g;
> s/^\|//;
> /Type: / && ProcessHistory("COMMENTS","keysort","A0",
> "#Chassis type: $'");
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
-------------- next part --------------
#! @PERLV_PATH@
##
## $Id: f5rancid.in 2134 2009-12-15 21:23:44Z heas $
##
## @PACKAGE@ @VERSION@
## Copyright (c) 1997-2008 by Terrapin Communications, Inc.
## All rights reserved.
##
## This code is derived from software contributed to and maintained by
## Terrapin Communications, Inc. by Henry Kilmer, John Heasley, Andrew Partan,
## Pete Whiting, Austin Schutz, and Andrew Fort.
##
## Redistribution and use in source and binary forms, with or without
## modification, are permitted provided that the following conditions
## are met:
## 1. Redistributions of source code must retain the above copyright
## notice, this list of conditions and the following disclaimer.
## 2. Redistributions in binary form must reproduce the above copyright
## notice, this list of conditions and the following disclaimer in the
## documentation and/or other materials provided with the distribution.
## 3. All advertising materials mentioning features or use of this software
## must display the following acknowledgement:
## This product includes software developed by Terrapin Communications,
## Inc. and its contributors for RANCID.
## 4. Neither the name of Terrapin Communications, Inc. nor the names of its
## contributors may be used to endorse or promote products derived from
## this software without specific prior written permission.
## 5. It is requested that non-binding fixes and modifications be contributed
## back to Terrapin Communications, Inc.
##
## THIS SOFTWARE IS PROVIDED BY Terrapin Communications, INC. AND CONTRIBUTORS
## ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
## TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
## PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COMPANY OR CONTRIBUTORS
## BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
## CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
## SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
## INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
## CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
## ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
## POSSIBILITY OF SUCH DAMAGE.
#
# This version of rancid tries to deal with F5 BigIPs.
#
# RANCID - Really Awesome New Cisco confIg Differ
#
# usage: rancid [-dV] [-l] [-f filename | hostname]
#
use Getopt::Std;
getopts('dflV');
if ($opt_V) {
print "@PACKAGE@ @VERSION@\n";
exit(0);
}
$log = $opt_l;
$debug = $opt_d;
$file = $opt_f;
$host = $ARGV[0];
$clean_run = 0;
$found_end = 0;
$timeo = 90; # clogin timeout in seconds
# force a terminal type so as not to confuse the POS
$ENV{'TERM'} = "vt100";
my(@commandtable, %commands, @commands);# command lists
my($aclsort) = ("ipsort"); # ACL sorting mode
my($filter_commstr); # SNMP community string filtering
my($filter_pwds); # password filtering mode
# This routine is used to print out the router configuration
sub ProcessHistory {
my($new_hist_tag,$new_command,$command_string, at string) = (@_);
if ((($new_hist_tag ne $hist_tag) || ($new_command ne $command))
&& defined %history) {
print eval "$command \%history";
undef %history;
}
if (($new_hist_tag) && ($new_command) && ($command_string)) {
if ($history{$command_string}) {
$history{$command_string} = "$history{$command_string}@string";
} else {
$history{$command_string} = "@string";
}
} elsif (($new_hist_tag) && ($new_command)) {
$history{++$#history} = "@string";
} else {
print "@string";
}
$hist_tag = $new_hist_tag;
$command = $new_command;
1;
}
sub numerically { $a <=> $b; }
# This is a sort routine that will sort numerically on the
# keys of a hash as if it were a normal array.
sub keynsort {
local(%lines) = @_;
local($i) = 0;
local(@sorted_lines);
foreach $key (sort numerically keys(%lines)) {
$sorted_lines[$i] = $lines{$key};
$i++;
}
@sorted_lines;
}
# This is a sort routine that will sort on the
# keys of a hash as if it were a normal array.
sub keysort {
local(%lines) = @_;
local($i) = 0;
local(@sorted_lines);
foreach $key (sort keys(%lines)) {
$sorted_lines[$i] = $lines{$key};
$i++;
}
@sorted_lines;
}
# This is a sort routine that will sort on the
# values of a hash as if it were a normal array.
sub valsort{
local(%lines) = @_;
local($i) = 0;
local(@sorted_lines);
foreach $key (sort values %lines) {
$sorted_lines[$i] = $key;
$i++;
}
@sorted_lines;
}
# This is a numerical sort routine (ascending).
sub numsort {
local(%lines) = @_;
local($i) = 0;
local(@sorted_lines);
foreach $num (sort {$a <=> $b} keys %lines) {
$sorted_lines[$i] = $lines{$num};
$i++;
}
@sorted_lines;
}
# This is a sort routine that will sort on the
# ip address when the ip address is anywhere in
# the strings.
sub ipsort {
local(%lines) = @_;
local($i) = 0;
local(@sorted_lines);
foreach $addr (sort sortbyipaddr keys %lines) {
$sorted_lines[$i] = $lines{$addr};
$i++;
}
@sorted_lines;
}
# These two routines will sort based upon IP addresses
sub ipaddrval {
my(@a) = ($_[0] =~ m#^(\d+)\.(\d+)\.(\d+)\.(\d+)$#);
$a[3] + 256 * ($a[2] + 256 * ($a[1] +256 * $a[0]));
}
sub sortbyipaddr {
&ipaddrval($a) <=> &ipaddrval($b);
}
# This routine parses "bigpipe base list"
sub ShowBaseRun {
my($line) = (0);
print STDERR " In ShowBaseRun: $_" if ($debug);
while (<INPUT>) {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if /^\s*\^\s*$/;
return(1) if /(Invalid input detected|Type help or )/;
return(-1) if (/command authorization failed/i);
if (!$line++) {
ProcessHistory("SHOWBASE","","","#\n#base:\n");
}
ProcessHistory("SHOWBASE","","","# $_") && next;
}
return(0);
}
# This routine parses "bigpipe db show"
sub ShowDb {
my($line) = (0);
print STDERR " In ShowDb: $_" if ($debug);
while (<INPUT>) {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if /^\s*\^\s*$/;
return(1) if /(Invalid input detected|Type help or )/;
return(-1) if (/command authorization failed/i);
if (!$line++) {
ProcessHistory("SHOWDB","","","#\n#database:\n");
}
/UCS.LoadTime/ && next;
/Configsync\..*Time/ && next;
/Configsync.peerupdatedstatus/ && next;
/LTM.ConfigTime/ && next;
if (/^(snmp\..*\.community\..* =) (.+)/i) {
if ($filter_commstr) {
ProcessHistory("SHOWDB","","","# $1 <removed>\n") && next;
} else {
ProcessHistory("SHOWDB","","","# $1 $2\n") && next;
}
}
ProcessHistory("SHOWDB","","","# $_") && next;
}
return(0);
}
# This routine parses "cat /config/bigip.license"
sub ShowLicense {
my($line) = (0);
print STDERR " In ShowLicense: $_" if ($debug);
while (<INPUT>) {
tr/\015//d;
# v9 software license does not have CR at EOF
s/^#-+($prompt.*)/$1/;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if /^\s*\^\s*$/;
return(1) if /(Invalid input detected|Type help or )/;
return(-1) if (/command authorization failed/i);
if (!$line++) {
ProcessHistory("LICENSE","","","#\n#/config/bigip.license:\n");
}
ProcessHistory("LICENSE","","","# $_") && next;
}
return(0);
}
# This routine parses "bigpipe monitor list all"
sub ShowMonitor {
my($line) = (0);
print STDERR " In ShowMonitor: $_" if ($debug);
while (<INPUT>) {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if /^\s*\^\s*$/;
return(1) if /(Invalid input detected|Type help or )/;
return(-1) if (/command authorization failed/i);
if (!$line++) {
ProcessHistory("MONITOR","","","#\n");
}
if (/^(snmp\.[^ ]+\.community) = (.+)/i) {
if ($filter_commstr) {
ProcessHistory("SHOWDB","","","# $1 <removed>\n") && next;
} else {
ProcessHistory("SHOWDB","","","# $1 $2\n") && next;
}
}
if (/^(\s*)password / && $filter_pwds >= 1) {
ProcessHistory("LINE-PASS","","","# $1password <removed>\n");
next;
}
ProcessHistory("MONITOR","","","# $_") && next;
}
return(0);
}
# This routine parses "bigpipe platform"
sub ShowPlatform {
print STDERR " In ShowPlatform: $_" if ($debug);
while (<INPUT>) {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if /^\s*\^\s*$/;
return(1) if /(Invalid input detected|Type help or )/;
return(-1) if (/command authorization failed/i);
/fan speed/i && next;
/chassis temperature/i && next;
/degC/ && next;
s/\d+rpm//ig;
s/^\|//;
/Type: / && ProcessHistory("COMMENTS","keysort","A0",
"#Chassis type: $'");
ProcessHistory("COMMENTS","keysort","B1","#$_") && next;
}
return(0);
}
# This routine parses "bigpipe profile list"
sub ShowProfile {
print STDERR " In ShowProfile: $_" if ($debug);
while (<INPUT>) {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if /^\s*\^\s*$/;
return(1) if /(Invalid input detected|Type help or )/;
return(-1) if (/command authorization failed/i);
ProcessHistory("PROFILE","",""," $_") && next;
}
return(0);
}
# This routine parses "ls --full-time --color=never /config/ssl/ssl.key"
sub ShowSslKey {
print STDERR " In ShowSslKey: $_" if ($debug);
while (<INPUT>) {
tr/\015//d;
# v9 software license does not have CR at EOF
s/^#-+($prompt.*)/$1/;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if /^\s*\^\s*$/;
return(1) if /(Invalid input detected|Type help or )/;
return(-1) if (/command authorization failed/i);
ProcessHistory("SSLKEY","","","# $_") && next;
}
return(0);
}
# This routine parses "ls --full-time --color=never /config/ssl/ssl.crt"
sub ShowSslCrt {
print STDERR " In ShowSslCrt: $_" if ($debug);
while (<INPUT>) {
tr/\015//d;
# v9 software license does not have CR at EOF
s/^#-+($prompt.*)/$1/;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if /^\s*\^\s*$/;
return(1) if /(Invalid input detected|Type help or )/;
return(-1) if (/command authorization failed/i);
ProcessHistory("SSLCRT","","","# $_") && next;
}
return(0);
}
# This routine parses "bigpipe route static show"
sub ShowRouteStatic {
print STDERR " In ShowRouteStatic: $_" if ($debug);
while (<INPUT>) {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if /^\s*\^\s*$/;
return(1) if /(Invalid input detected|Type help or )/;
return(-1) if (/command authorization failed/i);
ProcessHistory("ROUTE","",""," $_") && next;
}
return(0);
}
# This routine parses "bigpipe version"
sub ShowVersion {
print STDERR " In ShowVersion: $_" if ($debug);
while (<INPUT>) {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(-1) if (/command authorization failed/i);
/^kernel:/i && ($_ = <INPUT>) &&
ProcessHistory("COMMENTS","keysort","A3","#Image: Kernel: $_") &&
next;
if (/^package:/i) {
my($line);
while ($_ = <INPUT>) {
tr/\015//d;
last if (/:/);
last if (/^$prompt/);
chomp;
$line .= " $_";
}
ProcessHistory("COMMENTS","keysort","A2",
"#Image: Package:$line\n");
}
if (/:/) {
ProcessHistory("COMMENTS","keysort","C1","#$_");
} else {
ProcessHistory("COMMENTS","keysort","C1","#\t$_");
}
}
return(0);
}
# This routine processes a "bigpipe list"
sub WriteTerm {
my($lines) = 0;
print STDERR " In WriteTerm: $_" if ($debug);
while (<INPUT>) {
tr/\015//d;
next if (/^\s*$/);
# end of config - hopefully. f5 does not have a reliable end-of-config
# tag.
if (/^$prompt/) {
$found_end++;
last;
}
return(-1) if (/command authorization failed/i);
# the pager can not be disabled per-session on the PIX
s/^<-+ More -+>\s*//;
/Non-Volatile memory is in use/ && return(-1); # NvRAM is locked
# filter out any RCS/CVS tags to avoid confusing local CVS storage
s/\$(Revision|Id):/ $1:/;
$lines++;
if (/^(enable )?(password|passwd) / && $filter_pwds >= 1) {
ProcessHistory("ENABLE","","","! $1$2 <removed>\n");
next;
}
if (/^(enable secret) / && $filter_pwds >= 2) {
ProcessHistory("ENABLE","","","# $1 <removed>\n");
next;
}
if (/^username (\S+)(\s.*)? secret /) {
if ($filter_pwds >= 2) {
ProcessHistory("USER","keysort","$1","# username $1$2 secret <removed>\n");
} else {
ProcessHistory("USER","keysort","$1","$_");
}
next;
}
if (/^username (\S+)(\s.*)? password ((\d) \S+|\S+)/) {
if ($filter_pwds == 2) {
ProcessHistory("USER","keysort","$1","# username $1$2 password <removed>\n");
} elsif ($filter_pwds == 1 && $4 ne "5"){
ProcessHistory("USER","keysort","$1","# username $1$2 password <removed>\n");
} else {
ProcessHistory("USER","keysort","$1","$_");
}
next;
}
if (/^(\s*)password / && $filter_pwds >= 1) {
ProcessHistory("LINE-PASS","","","# $1password <removed>\n");
next;
}
if (/^\s*neighbor (\S*) password / && $filter_pwds >= 1) {
ProcessHistory("","","","# neighbor $1 password <removed>\n");
next;
}
# order logging statements
/^logging (\d+\.\d+\.\d+\.\d+)/ &&
ProcessHistory("LOGGING","ipsort","$1","$_") && next;
# order/prune tacacs/radius server statements
if (/^(tacacs-server|radius-server) key / && $filter_pwds >= 1) {
ProcessHistory("","","","# $1 key <removed>\n"); next;
}
# order clns host statements
/^clns host \S+ (\S+)/ &&
ProcessHistory("CLNS","keysort","$1","$_") && next;
# order alias statements
/^alias / && ProcessHistory("ALIAS","keysort","$_","$_") && next;
# delete ntp auth password - this md5 is a reversable too
if (/^(ntp authentication-key \d+ md5) / && $filter_pwds >= 1) {
ProcessHistory("","","","# $1 <removed>\n"); next;
}
# order ntp peers/servers
if (/^ntp (server|peer) (\d+)\.(\d+)\.(\d+)\.(\d+)/) {
$sortkey = sprintf("$1 %03d%03d%03d%03d",$2,$3,$4,$5);
ProcessHistory("NTP","keysort",$sortkey,"$_");
next;
}
# order ip host line statements
/^ip host line(\d+)/ &&
ProcessHistory("IPHOST","numsort","$1","$_") && next;
# order ip nat source static statements
/^ip nat (\S+) source static (\S+)/ &&
ProcessHistory("IP NAT $1","ipsort","$2","$_") && next;
# catch anything that wasnt matched above.
ProcessHistory("","","","$_");
}
if ($lines < 3) {
printf(STDERR "ERROR: $host configuration appears truncated.\n");
$found_end = 0;
return(-1);
}
return(0);
}
# dummy function
sub DoNothing {print STDOUT;}
# Main
@commandtable = (
{'bigpipe version' => 'ShowVersion'},
{'bigpipe platform' => 'ShowPlatform'},
{'cat /config/bigip.license' => 'ShowLicense'},
{'bigpipe monitor list all' => 'ShowMonitor'},
{'bigpipe profile list' => 'ShowProfile'},
{'bigpipe base list' => 'ShowBaseRun'},
{'bigpipe db show' => 'ShowDb'},
{'bigpipe route static show' => 'ShowRouteStatic'},
{'ls --full-time --color=never /config/ssl/ssl.crt' => 'ShowSslCrt'},
{'ls --full-time --color=never /config/ssl/ssl.key' => 'ShowSslKey'},
{'bigpipe list' => 'WriteTerm'}
);
# Use an array to preserve the order of the commands and a hash for mapping
# commands to the subroutine and track commands that have been completed.
@commands = map(keys(%$_), @commandtable);
%commands = map(%$_, @commandtable);
$cisco_cmds=join(";", at commands);
$cmds_regexp = join("|", map quotemeta($_), @commands);
if (length($host) == 0) {
if ($file) {
print(STDERR "Too few arguments: file name required\n");
exit(1);
} else {
print(STDERR "Too few arguments: host name required\n");
exit(1);
}
}
open(OUTPUT,">$host.new") || die "Can't open $host.new for writing: $!\n";
select(OUTPUT);
# make OUTPUT unbuffered if debugging
if ($debug) { $| = 1; }
if ($file) {
print STDERR "opening file $host\n" if ($debug);
print STDOUT "opening file $host\n" if ($log);
open(INPUT,"<$host") || die "open failed for $host: $!\n";
} else {
print STDERR "executing clogin -t $timeo -c\"$cisco_cmds\" $host\n" if ($debug);
print STDOUT "executing clogin -t $timeo -c\"$cisco_cmds\" $host\n" if ($log);
if (defined($ENV{NOPIPE})) {
system "clogin -t $timeo -c \"$cisco_cmds\" $host </dev/null > $host.raw 2>&1" || die "clogin failed for $host: $!\n";
open(INPUT, "< $host.raw") || die "clogin failed for $host: $!\n";
} else {
open(INPUT,"clogin -t $timeo -c \"$cisco_cmds\" $host </dev/null |") || die "clogin failed for $host: $!\n";
}
}
# determine ACL sorting mode
if ($ENV{"ACLSORT"} =~ /no/i) {
$aclsort = "";
}
# determine community string filtering mode
if (defined($ENV{"NOCOMMSTR"}) &&
($ENV{"NOCOMMSTR"} =~ /yes/i || $ENV{"NOCOMMSTR"} =~ /^$/)) {
$filter_commstr = 1;
} else {
$filter_commstr = 0;
}
# determine password filtering mode
if ($ENV{"FILTER_PWDS"} =~ /no/i) {
$filter_pwds = 0;
} elsif ($ENV{"FILTER_PWDS"} =~ /all/i) {
$filter_pwds = 2;
} else {
$filter_pwds = 1;
}
ProcessHistory("","","","#RANCID-CONTENT-TYPE: bigip\n#\n");
ProcessHistory("COMMENTS","keysort","A1","#\n");
ProcessHistory("COMMENTS","keysort","B0","#\n");
ProcessHistory("COMMENTS","keysort","C0","#\n");
TOP: while(<INPUT>) {
tr/\015//d;
if (/^Error:/) {
print STDOUT ("$host clogin error: $_");
print STDERR ("$host clogin error: $_") if ($debug);
$clean_run=0;
last;
}
while (/#\s*($cmds_regexp)\s*$/) {
$cmd = $1;
if (!defined($prompt)) {
$prompt = ($_ =~ /^([^#]+#)/)[0];
$prompt =~ s/([][}{)(\\])/\\$1/g;
print STDERR ("PROMPT MATCH: $prompt\n") if ($debug);
}
print STDERR ("HIT COMMAND:$_") if ($debug);
if (! defined($commands{$cmd})) {
print STDERR "$host: found unexpected command - \"$cmd\"\n";
$clean_run = 0;
last TOP;
}
$rval = &{$commands{$cmd}};
delete($commands{$cmd});
if ($rval == -1) {
$clean_run = 0;
last TOP;
}
}
if (/\#\s?exit$/) {
$clean_run=1;
last;
}
}
print STDOUT "Done $logincmd: $_\n" if ($log);
# Flush History
ProcessHistory("","","","");
# Cleanup
close(INPUT);
close(OUTPUT);
if (defined($ENV{NOPIPE})) {
unlink("$host.raw") if (! $debug);
}
# check for completeness
if (scalar(%commands) || !$clean_run || !$found_end) {
if (scalar(%commands)) {
printf(STDOUT "$host: missed cmd(s): %s\n", join(',', keys(%commands)));
printf(STDERR "$host: missed cmd(s): %s\n", join(',', keys(%commands))) if ($debug);
}
if (!$clean_run || !$found_end) {
print STDOUT "$host: End of run not found\n";
print STDERR "$host: End of run not found\n" if ($debug);
system("/usr/bin/tail -1 $host.new");
}
unlink "$host.new" if (! $debug);
}
More information about the Rancid-discuss
mailing list