[rancid] Re: Issue with Rancid running

[Nate Beck]

I have reinstalled with 2.3.2a8 and I still get this in the logs

Trying to get all of the configs.
10.211.169.218 clogin error: Error: TIMEOUT reached
10.211.169.218: missed cmd(s): show stack,show module,show flash,show
version,show system-information,write term
10.211.169.218: End of run not found
;
=====================================

But if I run /usr/local/rancid/bin/clogin 10.211.169.218 it works just fine




On 2/18/08 9:12 AM, "john heasley" <heas at shrubbery.net> wrote:

> please try 2.3.2a7 or a8.
> 
> Mon, Feb 18, 2008 at 09:10:26AM -0800, Nate Beck:
>> Rancid 2.3.2a2
>> Host os RHEL5 see below
>> The only thing that appears in the log is this
>> 
>> Trying to get all of the configs.
>> 10.211.169.218 clogin error: Error: TIMEOUT reached
>> 10.211.169.218: missed cmd(s): admin show diag,dir /all slavedisk2:,show rsp
>> chassis-info,dir /all sec-slot2:,show diag,dir /all disk1:,s$
>> 10.211.169.218: End of run not found
>> !
>> =====================================
>> Getting missed routers: round 1.
>> 10.211.169.218 clogin error: Error: TIMEOUT reached
>> 10.211.169.218: missed cmd(s): admin show diag,dir /all slavedisk2:,show rsp
>> chassis-info,dir /all sec-slot2:,show diag,dir /all disk1:,s$
>> 10.211.169.218: End of run not found
>> !
>> =====================================
>> 
>> 
>> 
>> 
>> On 2/18/08 9:05 AM, "john heasley" <heas at shrubbery.net> wrote:
>> 
>>> you  havent told us what version of rancid, which host o/s, or if any errors
>>> appeared in the log.
>>> 
>>> Mon, Feb 18, 2008 at 09:01:03AM -0800, Nate Beck:
>>>> I have the switch defined as hp in the router.db already.  How do you
>>>> define
>>>> hlogin?
>>>> 
>>>> 
>>>> On 2/18/08 8:57 AM, "Sam Munzani" <smunzani at comcast.net> wrote:
>>>> 
>>>>> Nate,
>>>>> 
>>>>> define that switch as hp and use hlogin.
>>>>> 
>>>>> Thanks,
>>>>> Sam
>>>>>>  Issue with Rancid running All,
>>>>>>   I just installed Rancid on Friday of last week on a RHEL5 box.  It
>>>>>> currently only has 1 switch in it, a HP 2848.  When I tested the clogin
>>>>>> it
>>>>>> worked fine.  Then when I run rancid-run it ran fine the first time.
>>>>>> After
>>>>>> that it has timed out everytime and thrown an error.  However when I run
>>>>>> the
>>>>>> command it runs fine.  Has anyone ever seen something like this before?
>>>>>>  
>>>>>> Thanks
>>>>>>  
>>>>>> Nate 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> _______________________________________________
>>>>>> Rancid-discuss mailing list
>>>>>> Rancid-discuss at shrubbery.net
>>>>>> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>>>>>> 
>>>>>> 
>>>> 
>>> 
>>>> _______________________________________________
>>>> Rancid-discuss mailing list
>>>> Rancid-discuss at shrubbery.net
>>>> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>>