[rancid] Re: Device not issuing and "End"

[Mike Ashcraft]

Gary,

You will need to make a copy of bin/rancid and modify it to work with this device, add the new clone vendor to bin/rancid-fe calling your modified rancid and set these clones as the newly created vendor in router.db.

If you name the clone, someone may have already created this modification and could provide a copy.

Mike

-----Original Message-----
From: rancid-discuss-bounces at shrubbery.net [mailto:rancid-discuss-bounces at shrubbery.net] On Behalf Of Gary Roberts
Sent: Monday, April 28, 2008 4:59 PM
To: rancid-discuss at shrubbery.net
Subject: [rancid] Device not issuing and "End"

I have a device that utilizes commands in the Cisco IOS format.
For backup purposes, lets say it is a Cisco Clone. 
However, when issuing a show running-config, the device does not include or issue an "END" at the end of the file, like most devices.
As a result, i get an "End of Run not found" error.

Suggestions?

Thanks in Advance,

gr
_______________________________________________
Rancid-discuss mailing list
Rancid-discuss at shrubbery.net
http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss