[rancid] Re: Vlans getting toggled on Cisco 6500

[Dylan Vanderhoof]

Hm, closer inspection shows its not limited to the 6500s, its happening
on almost all my Cisco devices.

-D

> -----Original Message-----
> From: Dylan Vanderhoof 
> Sent: Wednesday, January 10, 2007 1:00 PM
> To: rancid-discuss at shrubbery.net
> Subject: [rancid] Vlans getting toggled on Cisco 6500
> 
> 
> I've been seeing a lot of this lately:
> 
>   !VLAN: VLAN Name                             Status    Ports
>   !VLAN: ---- -------------------------------- ---------
> -------------------------------
> - !VLAN: 1    default                          active    
> Fa9/5, Fa9/16,
> Fa9/20, Fa9/39, Fa9/40, Fa9/41, Fa9/42, Fa9/43, Fa9/45
> + !VLAN: 1    default                          active    
> Fa9/5, Fa9/16,
> Fa9/20, Fa9/39
> + !VLAN:                                                 
> Fa9/40, Fa9/41,
> Fa9/42, Fa9/43
> + !VLAN:                                                 Fa9/45
> 
> And a day later, it'll change back to all be on a single line.
> 
> I vaguely recall seeing something like this on the list before, but I
> don't remember if there was a resolution and I can't find it now.
> Anybody have any idea how to prevent this?
> 
> (Running rancid 2.3.2a6)
> 
> Thanks,
> Dylan
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>