cc/td/doc/product/wireless/aironet/wgbridge
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

Workgroup Bridge Specifications

Workgroup Bridge Specifications

The following tables list the bridge's specifications.

LAN Interface Supported


Table A-1: LAN Interface Supported
Cable Specifications Connector

Twisted Pair Ethernet

IEEE 802.3 10BaseT

RJ-45 connector

Radio Characteristics


Table A-2: Radio Characteristics
Characteristic Description

Frequency

2.400 to 2.497 GHz

Modulation

Direct Sequence Spread Spectrum

Antenna

Standard is single captured antenna. Option: two RP-TNC diversity connectors to install remote antennas.

Power Output

1 to 30 mW

Compliance

Operates license-free under FCC Part 15 and complies as a Class B computing device. Complies with DOC regulations.

Complies with ETS 300.328, FTZ 2100 and MPT 1349 standards (and others).

Physical Specifications


Table A-3: Physical Specifications
Specification Description

Size

20 x 15 x 5 cm (7.8 x 5.9 x 1.9 in.)

Status indicators

Top panel: radio traffic activity, Ethernet traffic activity, status back panel (Ethernet only): Ethernet Rx and Tx activity, polarity

Power supply

Power pack. The power pack is either 120VAC/60Hz or 90-264VAC/47-63Hz, whichever is appropriate for country of use.

Weight

0.7 kg (1 lb 8 oz) 0.358 kg (12.8 oz)

Operating environment

-20° c to 50° C (-4° F to 122° F)


hometocprevnextglossaryfeedbacksearchhelp
Posted: Thu Aug 10 07:57:07 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.