About This Manual

This section discusses the objectives, audience, organization, and conventions of the WAN CiscoView for the MGX 8850 publication.

Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated monthly. Therefore, it might be more up to date than printed documentation. To order additional copies of the Documentation CD-ROM, contact your local sales representative or call customer service. The CD-ROM package is available as a single package or through an annual subscription. You can also access Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.

Document Objectives

This publication provides instructions for using WAN CiscoView for the MGX 8850. WAN CiscoView is a GUI-based device management software application that allows you to:

display a graphical representation of the network device
display configuration and performance information
perform minor configuration tasks
perform minor troubleshooting tasks

Audience

This publication is intended for anyone who operates or manages a WAN and has a general understanding of data communications concepts, general knowledge of UNIX, and knowledge of the interfaces used by devices connected to their WAN.

Document Organization

This publication is organized as follows:

Chapter 1, "Product Overview," presents an overview of WAN CiscoView.

Chapter 2, "Configuring AUSM 8port Cards," provides instructions for displaying and configuring AUSM 8-port card information on the WAN CiscoView interface.

Chapter 3, "Configuring CESM Cards," provides instructions for displaying and configuring CESM information on the WAN CiscoView interface.

Chapter 4, "Configuring FRSM-2CT3 Cards," provides instructions for displaying and configuring FRSM-2CT3 information on the WAN CiscoView interface.

Chapter 5, "Configuring FRSM-2T3/E3 Cards," provides instructions for displaying and configuring FRSM-2T3/E3 information on the WAN CiscoView interface.

Chapter 6, "Configuring FRSM 8port Cards," provides instructions for displaying and configuring FRSM 8-port card information on the WAN CiscoView interface.

Chapter 7, "Configuring FRSM-HS1/B Cards," provides instructions for displaying and configuring FRSM-HS1/B information on the WAN CiscoView interface.

Chapter 8, "Configuring FRSM-HS2 Cards," provides instructions for displaying and configuring FRSM-HS2 information on the WAN CiscoView interface.

Chapter 9, "Configuring PXM Cards," provides instructions for displaying and configuring PXM information on the WAN CiscoView interface.

Chapter 10, "Configuring RPM Cards," provides instructions for displaying and configuring RPM information on the WAN CiscoView interface.

Chapter 11, "Configuring SRM 3T3 Cards," provides instructions for displaying and configuring SRM 3T3 information on the WAN CiscoView interface.

Chapter 12, "Monitoring Lines," provides instructions for monitoring line information on the
WAN CiscoView interface.

Document Conventions

Command descriptions use these conventions:

Commands and keywords are in boldface.
Elements in square brackets ([ ]) are optional.

Examples use the following conventions:

Terminal sessions and information the system displays are printed in screen font.
Information you enter is in boldface screen font or boldface font.

Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the publication.

Table of Contents