|
|
This chapter describes the following statistics supported by the AXSM MIBs.
Line Statistics primarily are supported by the physical devices. In addition, the ATLAS policer on the OC12 and below supplies additional line level statistics. Note the ATLAS is utilized in both the ingress and egress directions.
Table 15-1 shows the ingress per line statistics before the policer for the various AXSM options.
| Statistic | BXM | AXSM OC48 | AXSM OC3/12 | AXSM T3/E3 | MIB Object |
|---|---|---|---|---|---|
CLP0 Cells From Port | yes | no | yes | yes | caclInRcvCLP0Cells |
CLP1 Cells From Port | yes | no | yes | yes | caclInRcvCLP1Cells |
Total Valid OAM Cells | no | no | yes | yes | caclInValidOAMCells |
Total Valid RM Cells | no | no | yes | yes |
|
Total Errored OAM/RM Cells | no | no | yes | yes | caclInErrOAMCells |
non-zero GFC Cells | no | no | yes | yes | caclInGfcCells |
Last Unknown VPI.VCI (invalid) | yes | no | yes | yes | caclInLastUnknVpi, caclInLastUnknVci |
HEC Errored Cells Discarded | yes | yes | yes | yes | caclInHecErrDiscCells |
HEC Errored Cells Corrected | yes | yes | yes | yes | caclInHecErrCorrectedCells |
The ingress per line policing statistics (PHY) are shown in Table 15-2 for the various AXSM options.
| Statistic | BXM | AXSM OC48 | AXSM OC3/12 | AXSM T3/E3 | MIB Object |
|---|---|---|---|---|---|
no | no | yes | yes | caclInUpcCLP0DiscCells | |
yes | no | yes | yes | caclInUpcTotalDiscCells | |
NonCompliant CLP0+1 | no | no | yes | yes | caclInUpcTotalNonCompCells |
The egress per line statistics to port are shown in Table 15-3 for the various AXSM options.
| Statistic | BXM | AXSM OC48 | AXSM OC3/12 | AXSM T3/E3 | MIB Object |
|---|---|---|---|---|---|
yes | no | yes | yes | caclOutXmtCLP0Cells | |
yes | no | yes | yes | caclOutXmtCLP1Cells | |
yes | yes1 | yes | yes |
| |
no | no | yes | yes | caclOutValidOAMCells | |
no | no | yes | yes | caclOutRcvValidRMCells | |
no | no | yes | yes | caclOutErrOAMCells |
| 1From phy non idle |
Port Statistics supported include the ingress port statistics after the policer, and the egress IF statistics.
Table 15-4 shows the ingress port statistics after the policer for the various AXSM options. Note that for OAM cell statistics the QE48 supports all 64 Service Groups.
| Statistic | BXM | AXSMOC48 | AXSM OC3/12 | AXSM T3/E3 | MIB Object |
|---|---|---|---|---|---|
yes | yes | yes | yes | caviEgrRcvClp0Cells | |
yes | yes | yes | yes | caviEgrRcvClp1Cells | |
yes | yes | yes | yes | caviEgrClp0DiscCells | |
yes | yes | yes | yes | caviEgrClp1DiscCells | |
no | yes | yes | yes | caviEgrXmtClp0Cells | |
no | yes | yes | yes | caviEgrXmtClp1Cells | |
yes | no | no | no | caviEgrRcvOAMCells |
Table 15-5 shows the egress IF statistics for the various AXSM Options.
| Statistic | BXM | AXSM-OC48 | AXSM OC3/12 | AXSM T3/E3 | MIB Object |
|---|---|---|---|---|---|
yes | yes | yes | yes | caviIngRcvClp0Cells | |
yes | yes | yes | yes | caviIngRcvClp1Cells | |
yes | yes | yes | yes | caviIngClp0DiscCells | |
yes | yes | yes | yes | caviIngClp1DiscCells | |
no | yes | yes | yes | caviIngXmtClp0Cells | |
no | yes | yes | yes | caviIngXmtClp1Cells | |
yes | yes | yes | yes | caviIngXmtOAMCells |
![]()
![]()
![]()
![]()
![]()
![]()
![]()
Posted: Fri Sep 15 10:58:35 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.