Monitoring Lines

Double-click the connector on the card.
Select the connector, then select Monitor>line.
Select the connector, right-click to display the Line popup menu, then select Monitor.
Select the connector, then click the Monitor button on the toolbar.

To view the parameters in line graph format, use the HP OpenView Grapher application. Select the parameters by clicking once, then click the Grapher button. The Monitor dialog remains open.

Monitoring dsx1 Counters

There are two dialogs for monitoring dsx1 counters:

dsx1 Counters (1 of 2)
dsx1 Counters (2 of 2)

Use the dsx1 Counters dialogs to view dsx1 Counters. (See Figure 10-1 and Figure 10-2.)

Figure 10-1: dsx1 Counters (1 of 2) Dialog

The dsx1 Counter (1 of 2) dialog parameters are described in Table 10-1.

Table 10-1: dsx1 Counters (1 of 2) Dialog Parameters

Parameter Description

Rx LOS Count

Number of times the Loss of Signal is detected with or without integrating to LOS alarm.

Rx OOF Count

Number of times the Out Of Frame is detected with or without integrating to OOF alarm.

Rx RAI Count

Number of times yellow alarms is detected with or without integrating to RAI alarm.

Rx FE Count

Number of Framing Pattern Errors encountered by a DS3/E3 interface.

LCV Current

Number of Line Code Violations encountered by the interface.

LCV 15 Min Bucket

Number of Line Code Violations in the last 15-minute period encountered by the interface.

LCV 24 Hr Bucket

Number of Line Code Violations in the last 24-hour period encountered by the interface.

LES Current

Number of Line Code Violations Errored Seconds encountered by the interface.

LES 15 Min Bucket

Number of Line Code Violations Errored Seconds in the last 15-minute period encountered by the interface.

LES 24 Hr Bucket

Number of Line Code Violations Errored Seconds in the last 24-hour period encountered by the interface.

LSES Current

Number of Line Code Violations Severely Errored Seconds encountered by the interface.

LSES 15 Min Bucket

Number of Line Code Violations Severely Errored Seconds in the last 15-minute period encountered by the interface.

LSES 24 Hr Bucket

Number of Line Code Violations Severely Errored Seconds in the last 24-hour period encountered by the interface.

CRC Current

Number of CRCs encountered by the interface.

CRC 15 Min Bucket

Number of CRCs in the last 15-minute period encountered by the interface

CRC 24 Hr Bucket

Number of CRCs in the last 24-hour period encountered by the interface

Parameter	Description
Rx LOS Count	Number of times the Loss of Signal is detected with or without integrating to LOS alarm.
Rx OOF Count	Number of times the Out Of Frame is detected with or without integrating to OOF alarm.
Rx RAI Count	Number of times yellow alarms is detected with or without integrating to RAI alarm.
Rx FE Count	Number of Framing Pattern Errors encountered by a DS3/E3 interface.
LCV Current	Number of Line Code Violations encountered by the interface.
LCV 15 Min Bucket	Number of Line Code Violations in the last 15-minute period encountered by the interface.
LCV 24 Hr Bucket	Number of Line Code Violations in the last 24-hour period encountered by the interface.
LES Current	Number of Line Code Violations Errored Seconds encountered by the interface.
LES 15 Min Bucket	Number of Line Code Violations Errored Seconds in the last 15-minute period encountered by the interface.
LES 24 Hr Bucket	Number of Line Code Violations Errored Seconds in the last 24-hour period encountered by the interface.
LSES Current	Number of Line Code Violations Severely Errored Seconds encountered by the interface.
LSES 15 Min Bucket	Number of Line Code Violations Severely Errored Seconds in the last 15-minute period encountered by the interface.
LSES 24 Hr Bucket	Number of Line Code Violations Severely Errored Seconds in the last 24-hour period encountered by the interface.
CRC Current	Number of CRCs encountered by the interface.
CRC 15 Min Bucket	Number of CRCs in the last 15-minute period encountered by the interface
CRC 24 Hr Bucket	Number of CRCs in the last 24-hour period encountered by the interface

Figure 10-2: dsx1 Counters (2 of 2) Dialog

The dsx1 Counter (2 of 2) dialog parameters are described in Table 10-2.

Table 10-2: dsx1 Counters (2 of 2) Parameters

Parameter Description

CRCES Current

Number of CRC Errored Seconds encountered by the interface.

CRCES 15 Min Bucket

Number of CRC Errored Seconds in the last 15-minute period encountered by the interface.

CRCES 24 Hr Bucket

Number of CRC Errored Seconds in the last 24-hour period encountered by the interface.

CRCSES Current

Number of PCV Errored Seconds encountered by the interface.

CRCSES 15 Min Bucket

Number of PCV Errored Seconds in the last 15-minute period encountered by the interface.

CRCSES 24 Hr Bucket

Number of PCV Errored Seconds in the last 15-minute period encountered by the interface.

SEFS Current

Number of Severely Errored Framing Seconds encountered by the interface.

SEFS 15 Min Bucket

Number of Severely Errored Framing Seconds in the last 15-minute period encountered by the interface.

SEFS 24 Hr Bucket

Number of Severely Errored Framing Seconds in the last 24-hour period encountered by the interface.

AISS Current

Counts the number of AIS Severely Errored Seconds encountered by the interface.

AISS 15 Min Bucket

Number of AIS Severely Errored Seconds in the last 15-minute period encountered by the interface.

AISS 24 Hr Bucket

Number of AIS Severely Errored Seconds in the last 24-hour period encountered by the interface.

UAS Current

Number of Unavailable Seconds encountered by the interface.

UAS 15 Min Bucket

Number of Unavailable Seconds in the last 15-minute period encountered by the interface.

UAS 24 Hr Bucket

Number of Unavailable Seconds in the last 24-hour period encountered by the interface.

Percent EFS

Percentage of seconds without any LCV Errors in the total elapsed seconds.

Parameter	Description
CRCES Current	Number of CRC Errored Seconds encountered by the interface.
CRCES 15 Min Bucket	Number of CRC Errored Seconds in the last 15-minute period encountered by the interface.
CRCES 24 Hr Bucket	Number of CRC Errored Seconds in the last 24-hour period encountered by the interface.
CRCSES Current	Number of PCV Errored Seconds encountered by the interface.
CRCSES 15 Min Bucket	Number of PCV Errored Seconds in the last 15-minute period encountered by the interface.
CRCSES 24 Hr Bucket	Number of PCV Errored Seconds in the last 15-minute period encountered by the interface.
SEFS Current	Number of Severely Errored Framing Seconds encountered by the interface.
SEFS 15 Min Bucket	Number of Severely Errored Framing Seconds in the last 15-minute period encountered by the interface.
SEFS 24 Hr Bucket	Number of Severely Errored Framing Seconds in the last 24-hour period encountered by the interface.
AISS Current	Counts the number of AIS Severely Errored Seconds encountered by the interface.
AISS 15 Min Bucket	Number of AIS Severely Errored Seconds in the last 15-minute period encountered by the interface.
AISS 24 Hr Bucket	Number of AIS Severely Errored Seconds in the last 24-hour period encountered by the interface.
UAS Current	Number of Unavailable Seconds encountered by the interface.
UAS 15 Min Bucket	Number of Unavailable Seconds in the last 15-minute period encountered by the interface.
UAS 24 Hr Bucket	Number of Unavailable Seconds in the last 24-hour period encountered by the interface.
Percent EFS	Percentage of seconds without any LCV Errors in the total elapsed seconds.

Monitoring dsx3 Counters

There are two dialogs for monitoring dsx3 counters. Use the dsx3 Counters dialogs to view dsx3 Counters. (See Figure 10-3 and Figure 10-4.)

Figure 10-3: dsx3 Counters (1 of 2) Dialog

The dsx3 Counters dialog parameters are described in Table 10-3.

Table 10-3: dsx3 Counters (1 of 2) Dialog Parameters

Parameter Description

Rx LOS Count

Number of times the Loss of Signal is detected with or without integrating to LOS alarm.

Rx OOF Count

Number of times the Out Of Frame is detected with or without integrating to OOF alarm.

RAI Count

Number of times yellow alarms is detected with or without integrating to RAI alarm.

CCV Count

Counter associated with the number of C Bit Coding Violations encountered by a DS3/E3 interface.

FE Count

Number of Framing Pattern Errors encountered by a DS3/E3 interface.

LCV Current

Number of Line Code Violations encountered by the interface.

LCV 15 Min Bucket

Number of Line Code Violations in the last 15-minute period encountered by the interface.

LCV 24 Hr Bucket

Number of Line Code Violations in the last 24-hour period encountered by the interface.

LES Current

Number of Line Code Violations Errored Seconds encountered by the interface.

LES 15 Min Bucket

Number of Line Code Violations Errored Seconds in the last 15-minute period encountered by the interface.

LES 24 Hr Bucket

Number of Line Code Violations Errored Seconds in the last 24-hour period encountered by the interface.

LSES Current

Number of Line Code Violations Severely Errored Seconds encountered by the interface.

LSES 15 Min Bucket

Number of Line Code Violations Severely Errored Seconds in the last 15-minute period encountered by the interface.

LSES 24 Hr Bucket

Number of Line Code Violations Severely Errored Seconds in the last 24-hour period encountered by the interface.

PCV Current

Number of P-Bit Code Violations encountered by the interface.

PCV 15 Min Bucket

Number of P-Bit Code Violations in the last 15-minute period encountered by the interface.

PCV 24 Hr Bucket

Number of P-Bit Code Violations in the last 24-hour period encountered by the interface.

PES Current

Number of PCV Errored Seconds encountered by the interface.

PES 15 Min Bucket

Number of PCV Errored Seconds in the last 15-minute period encountered by the interface.

PES 24 Hr Bucket

Number of PCV Errored Seconds in the last 24-hour period encountered by the interface.

Parameter	Description
Rx LOS Count	Number of times the Loss of Signal is detected with or without integrating to LOS alarm.
Rx OOF Count	Number of times the Out Of Frame is detected with or without integrating to OOF alarm.
RAI Count	Number of times yellow alarms is detected with or without integrating to RAI alarm.
CCV Count	Counter associated with the number of C Bit Coding Violations encountered by a DS3/E3 interface.
FE Count	Number of Framing Pattern Errors encountered by a DS3/E3 interface.
LCV Current	Number of Line Code Violations encountered by the interface.
LCV 15 Min Bucket	Number of Line Code Violations in the last 15-minute period encountered by the interface.
LCV 24 Hr Bucket	Number of Line Code Violations in the last 24-hour period encountered by the interface.
LES Current	Number of Line Code Violations Errored Seconds encountered by the interface.
LES 15 Min Bucket	Number of Line Code Violations Errored Seconds in the last 15-minute period encountered by the interface.
LES 24 Hr Bucket	Number of Line Code Violations Errored Seconds in the last 24-hour period encountered by the interface.
LSES Current	Number of Line Code Violations Severely Errored Seconds encountered by the interface.
LSES 15 Min Bucket	Number of Line Code Violations Severely Errored Seconds in the last 15-minute period encountered by the interface.
LSES 24 Hr Bucket	Number of Line Code Violations Severely Errored Seconds in the last 24-hour period encountered by the interface.
PCV Current	Number of P-Bit Code Violations encountered by the interface.
PCV 15 Min Bucket	Number of P-Bit Code Violations in the last 15-minute period encountered by the interface.
PCV 24 Hr Bucket	Number of P-Bit Code Violations in the last 24-hour period encountered by the interface.
PES Current	Number of PCV Errored Seconds encountered by the interface.
PES 15 Min Bucket	Number of PCV Errored Seconds in the last 15-minute period encountered by the interface.
PES 24 Hr Bucket	Number of PCV Errored Seconds in the last 24-hour period encountered by the interface.

Figure 10-4: dsx3 Counters (2 of 2) Dialog

The dsx3 Counters dialog parameters are described in Table 10-4.

Table 10-4: dsx3 Counters (2 of 2) Dialog Parameters

Parameter Description

PSES Current

Number of P-Bit Code Violations Severely Errored Seconds encountered by the interface.

PSES 15 Min Bucket

Number of PCV Severely Errored Seconds in the last 15-minute period encountered by the interface.

PSES 24 Hr Bucket

Number of PCV Severely Errored Seconds in the last 24-hour period encountered by the interface.

SEFS Current

Number of Severely Errored Framing Seconds encountered by the interface.

SEFS 15 Min Bucket

Number of Severely Errored Framing Seconds in the last 15-minute period encountered by the interface.

SEFS 24 Hr Bucket

Number of Severely Errored Framing Seconds in the last 24-hour period encountered by the interface.

AISS Current

Counter counts the number of AIS Severely Errored Seconds encountered by the interface.

AISS 15 Min Bucket

Number of AIS Severely Errored Seconds in the last 15-minute period encountered by the interface.

AISS 24 Hr Bucket

Number of AIS Severely Errored Seconds in the last 24-hour period encountered by the interface.

UAS Current

Number of Unavailable Seconds encountered by the interface.

UAS 15 Min Bucket

Number of Unavailable Seconds in the last 15-minute period encountered by the interface.

UAS 24 Hr Bucket

Number of Unavailable Seconds in the last 24-hour period encountered by the interface.

CCV Current

Number of C-Bit parity Code Violations encountered by the interface.

CCV 15 Min Bucket

Number of C-Bit parity Code Violations in the last 15-minute period encountered by the interface.

CCV 24 Hr Bucket

Number of C-Bit parity Code Violations in the last 24-hour period encountered by the interface.

CES Current

Number of C-Bit parity Errored Seconds encountered by the interface.

CES 15 Min Bucket

Number of C-Bit parity Errored Seconds in the last 15-minute period encountered by the interface.

CES 24 Hr Bucket

Number of C-Bit parity Errored Seconds in the last 24-hour period encountered by the interface.

CSES Current

Number of C-Bit parity Severely Errored Seconds encountered by the interface.

CSES 15 Min Bucket

Number of C-Bit parity Severely Errored Seconds in the last 15-minute period encountered by the interface.

CSES 24 Hr Bucket

Number of C-Bit parity Severely Errored Seconds in the last 24-hour period encountered by the interface.

Percent LCV EFS

Percentage of seconds without any LCV Errors in the total elapsed seconds.

Parameter	Description
PSES Current	Number of P-Bit Code Violations Severely Errored Seconds encountered by the interface.
PSES 15 Min Bucket	Number of PCV Severely Errored Seconds in the last 15-minute period encountered by the interface.
PSES 24 Hr Bucket	Number of PCV Severely Errored Seconds in the last 24-hour period encountered by the interface.
SEFS Current	Number of Severely Errored Framing Seconds encountered by the interface.
SEFS 15 Min Bucket	Number of Severely Errored Framing Seconds in the last 15-minute period encountered by the interface.
SEFS 24 Hr Bucket	Number of Severely Errored Framing Seconds in the last 24-hour period encountered by the interface.
AISS Current	Counter counts the number of AIS Severely Errored Seconds encountered by the interface.
AISS 15 Min Bucket	Number of AIS Severely Errored Seconds in the last 15-minute period encountered by the interface.
AISS 24 Hr Bucket	Number of AIS Severely Errored Seconds in the last 24-hour period encountered by the interface.
UAS Current	Number of Unavailable Seconds encountered by the interface.
UAS 15 Min Bucket	Number of Unavailable Seconds in the last 15-minute period encountered by the interface.
UAS 24 Hr Bucket	Number of Unavailable Seconds in the last 24-hour period encountered by the interface.
CCV Current	Number of C-Bit parity Code Violations encountered by the interface.
CCV 15 Min Bucket	Number of C-Bit parity Code Violations in the last 15-minute period encountered by the interface.
CCV 24 Hr Bucket	Number of C-Bit parity Code Violations in the last 24-hour period encountered by the interface.
CES Current	Number of C-Bit parity Errored Seconds encountered by the interface.
CES 15 Min Bucket	Number of C-Bit parity Errored Seconds in the last 15-minute period encountered by the interface.
CES 24 Hr Bucket	Number of C-Bit parity Errored Seconds in the last 24-hour period encountered by the interface.
CSES Current	Number of C-Bit parity Severely Errored Seconds encountered by the interface.
CSES 15 Min Bucket	Number of C-Bit parity Severely Errored Seconds in the last 15-minute period encountered by the interface.
CSES 24 Hr Bucket	Number of C-Bit parity Severely Errored Seconds in the last 24-hour period encountered by the interface.
Percent LCV EFS	Percentage of seconds without any LCV Errors in the total elapsed seconds.

Monitoring dsx3 PLCP Counters

There are two dialogs for monitoring dsx3 PLCP counters:

dsx3 PLCP Counters (1 of 2)
dsx3 PLCP Counters (2 of 2)

Use the Dsx3 Counters dialogs to view Dsx3 Counters. The dsx3 PLCP Counters (1 of 2) dialog parameters are described in Table 10-5.

Table 10-5: dsx3 PLCP Counters (1 of 2) Dialog

Parameter Description

Rcv Bip-8 Cnt

Number of BIP-8 errors.

Rcv OOF Cnt

Number of times the Out Of Frame is detected with or without integrating to OOF alarm.

Rcv RAI Cnt

The number of times yellow alarms is detected with or without integrating to RAI alarm.

FE Cnt

Number of framing errors detected.

FE Sec Cnt

Number of framing error errored seconds.

SEFE Sec Cnt

Number of severely errored framing error seconds.

FEBE Cnt

Number of FEBE errors.

FEBE Sec Cnt

Number of errored FEBE seconds.

SEFBE Sec Cnt

Number of severely errored FEBE seconds.

Hec Cnt

Number of HEC errors.

Hec Sec Cnt

Number of errored HEC seconds.

SEHEC Sec Cnt

Number of severely errored HEC seconds.

Parameter	Description
Rcv Bip-8 Cnt	Number of BIP-8 errors.
Rcv OOF Cnt	Number of times the Out Of Frame is detected with or without integrating to OOF alarm.
Rcv RAI Cnt	The number of times yellow alarms is detected with or without integrating to RAI alarm.
FE Cnt	Number of framing errors detected.
FE Sec Cnt	Number of framing error errored seconds.
SEFE Sec Cnt	Number of severely errored framing error seconds.
FEBE Cnt	Number of FEBE errors.
FEBE Sec Cnt	Number of errored FEBE seconds.
SEFBE Sec Cnt	Number of severely errored FEBE seconds.
Hec Cnt	Number of HEC errors.
Hec Sec Cnt	Number of errored HEC seconds.
SEHEC Sec Cnt	Number of severely errored HEC seconds.

The dsx3 PLCP Counters (2 of 2) dialog parameters are described in Table 10-6.

Table 10-6: dsx3 PLCP Counters (2 of 2) Dialog Parameters

Parameter Description

PSES Current

Number of P-Bit Code Violations Severely Errored Seconds encountered by the interface.

PSES 15 Min Bucket

Number of PCV Severely Errored Seconds in the last 15-minute period encountered by the interface.

PSES 24 Hr Bucket

Number of PCV Severely Errored Seconds in the last 24-hour period encountered by the interface.

SEFS Current

Number of Severely Errored Framing Seconds encountered by the interface.

SEFS 15 Min Bucket

Number of Severely Errored Framing Seconds in the last 15-minute period encountered by the interface.

SEFS 24 Hr Bucket

Number of Severely Errored Framing Seconds in the last 24-hour period encountered by the interface.

AISS Current

Number counts the number of AIS Severely Errored Seconds encountered by the interface.

AISS 15 Min Bucket

Number of AIS Severely Errored Seconds in the last 15-minute period encountered by the interface.

AISS 24 Hr Bucket

Number of AIS Severely Errored Seconds in the last 24-hour period encountered by the interface.

UAS Current

Number of Unavailable Seconds encountered by the interface.

UAS 15 Min Bucket

The number of Unavailable Seconds in the last 15-minute period encountered by the interface.

UAS 24 Hr Bucket

Number of Unavailable Seconds in the last 24-hour period encountered by the interface.

CCV Current

Number of C-Bit parity Code Violations encountered by the interface.

CCV 15 Min Bucket

Number of C-Bit parity Code Violations in the last 15-minute period encountered by the interface.

CCV 24 Hr Bucket

Number of C-Bit parity Code Violations in the last 24-hour period encountered by the interface.

CES Current

The number of C-Bit parity Errored Seconds encountered by the interface.

CES 15 Min Bucket

Number of C-Bit parity Errored Seconds in the last 15-minute period encountered by the interface.

CES 24 Hr Bucket

Number of C-Bit parity Errored Seconds in the last 24-hour period encountered by the interface.

CSES Current

Number of C-Bit parity Severely Errored Seconds encountered by the interface.

CSES 15 Min Bucket

Number of C-Bit parity Severely Errored Seconds in the last 15-minute period encountered by the interface.

CSES 24 Hr Bucket

Number of C-Bit parity Severely Errored Seconds in the last 24-hour period encountered by the interface.

Percent LCV EFS

Percentage of seconds without any LCV Errors in the total elapsed seconds.

Parameter	Description
PSES Current	Number of P-Bit Code Violations Severely Errored Seconds encountered by the interface.
PSES 15 Min Bucket	Number of PCV Severely Errored Seconds in the last 15-minute period encountered by the interface.
PSES 24 Hr Bucket	Number of PCV Severely Errored Seconds in the last 24-hour period encountered by the interface.
SEFS Current	Number of Severely Errored Framing Seconds encountered by the interface.
SEFS 15 Min Bucket	Number of Severely Errored Framing Seconds in the last 15-minute period encountered by the interface.
SEFS 24 Hr Bucket	Number of Severely Errored Framing Seconds in the last 24-hour period encountered by the interface.
AISS Current	Number counts the number of AIS Severely Errored Seconds encountered by the interface.
AISS 15 Min Bucket	Number of AIS Severely Errored Seconds in the last 15-minute period encountered by the interface.
AISS 24 Hr Bucket	Number of AIS Severely Errored Seconds in the last 24-hour period encountered by the interface.
UAS Current	Number of Unavailable Seconds encountered by the interface.
UAS 15 Min Bucket	The number of Unavailable Seconds in the last 15-minute period encountered by the interface.
UAS 24 Hr Bucket	Number of Unavailable Seconds in the last 24-hour period encountered by the interface.
CCV Current	Number of C-Bit parity Code Violations encountered by the interface.
CCV 15 Min Bucket	Number of C-Bit parity Code Violations in the last 15-minute period encountered by the interface.
CCV 24 Hr Bucket	Number of C-Bit parity Code Violations in the last 24-hour period encountered by the interface.
CES Current	The number of C-Bit parity Errored Seconds encountered by the interface.
CES 15 Min Bucket	Number of C-Bit parity Errored Seconds in the last 15-minute period encountered by the interface.
CES 24 Hr Bucket	Number of C-Bit parity Errored Seconds in the last 24-hour period encountered by the interface.
CSES Current	Number of C-Bit parity Severely Errored Seconds encountered by the interface.
CSES 15 Min Bucket	Number of C-Bit parity Severely Errored Seconds in the last 15-minute period encountered by the interface.
CSES 24 Hr Bucket	Number of C-Bit parity Severely Errored Seconds in the last 24-hour period encountered by the interface.
Percent LCV EFS	Percentage of seconds without any LCV Errors in the total elapsed seconds.

Monitoring Logical Ports

There are four dialogs for monitoring Logical Ports on a FRSM 8T1 card:

FR Port Monitor (Rcv Counters)
FR Port Monitor (XMT Counters)
FR Port Monitor (ILMI/CLLM)
ATM-ILMI Port RealTime Counters. These dialogs are described in the sections that follow.

FR Port Monitor (RCV) Counters

Use the FR Port Monitor (Rcv) Counters dialog to monitor received FR port counters. (See Figure 10-5.)

Figure 10-5: FR Port Monitor (Rcv) Counters

The FR Port Monitor (Rcv) Counters dialog parameters are described in Table 10-7.

Table 10-7: FR Port Monitor (Rcv) Counters Dialog Parameters

Parameter Description

Rcv Port Frames

Number of frames received in the Ingress direction.

Rcv Port Bytes

Number of bytes received in the Ingress direction.

Rcv Port Frames DE

Number of frames with DE bit set received in the Ingress direction.

Rcv Port Frames FECN

Number of frames with FECN bit set received in the Ingress direction.

Rcv Port Frames BECN

Number of frames with BECN bit set received in the Ingress direction.

Rcv Frames Disc CRC Err

Number of frames discarded on the Ingress due to CRC error.

Rcv Frames Disc Alignment Err

Number of frames discarded on the Ingress due to alignment error.

Rcv Frames Disc Illegal Len

Number of frames discarded on the Ingress due to illegal length.

Rcv Frames Disc Illegal Hdr

Number of frames discarded on the Ingress due to illegal header.

Rcv Frames Abort

Number of received frames aborted.

Rcv Frames Unkn DLCI

Number of frames received with an unknown DLCI.

Rcv Frames Last Unkn DLCI

Last unknown DLCI received.

Rcv Frames Tagged FECN

Number of frames received that were tagged with FECN bit.

Rcv Frames Tagged BECN

Number of frames received that were tagged with BECN bit.

Rcv Frames Tagged DE

Number of frames received that were tagged with DE bit.

Rcv Frames Disc DE Thresh Xceed

Number of frames discarded on the Ingress due to exceeded DE threshold.

Rcv Port Kbps AIR

Received Average Information Rate in Kbps.

Rcv Buf Not Available

Number of times the receiver is turned off.

Rcv Frames Disc No

Number of times the receiver is turned off.

Parameter	Description
Rcv Port Frames	Number of frames received in the Ingress direction.
Rcv Port Bytes	Number of bytes received in the Ingress direction.
Rcv Port Frames DE	Number of frames with DE bit set received in the Ingress direction.
Rcv Port Frames FECN	Number of frames with FECN bit set received in the Ingress direction.
Rcv Port Frames BECN	Number of frames with BECN bit set received in the Ingress direction.
Rcv Frames Disc CRC Err	Number of frames discarded on the Ingress due to CRC error.
Rcv Frames Disc Alignment Err	Number of frames discarded on the Ingress due to alignment error.
Rcv Frames Disc Illegal Len	Number of frames discarded on the Ingress due to illegal length.
Rcv Frames Disc Illegal Hdr	Number of frames discarded on the Ingress due to illegal header.
Rcv Frames Abort	Number of received frames aborted.
Rcv Frames Unkn DLCI	Number of frames received with an unknown DLCI.
Rcv Frames Last Unkn DLCI	Last unknown DLCI received.
Rcv Frames Tagged FECN	Number of frames received that were tagged with FECN bit.
Rcv Frames Tagged BECN	Number of frames received that were tagged with BECN bit.
Rcv Frames Tagged DE	Number of frames received that were tagged with DE bit.
Rcv Frames Disc DE Thresh Xceed	Number of frames discarded on the Ingress due to exceeded DE threshold.
Rcv Port Kbps AIR	Received Average Information Rate in Kbps.
Rcv Buf Not Available	Number of times the receiver is turned off.
Rcv Frames Disc No	Number of times the receiver is turned off.

FR Port Monitor (Xmt) Counters

Use the FR Port Monitor (Xmt) Counters dialog to monitor transmitted FR port counters. (See Figure 10-6.)

Figure 10-6: FR Port Monitor (Xmt) Counters

The FR Port Monitor (Xmt) Counters dialog parameters are described in Table 10-8.

Table 10-8: FR Port Monitor (XMT) Counters

Parameter Description

Xmt Port Frames

Number of frames transmitted.

Xmt Port Bytes

Number of bytes transmitted.

Xmt Port Frames FECN

Number of frames transmitted with FECN bit set.

Xmt Port Frames BECN

Number of frames transmitted with BECN bit set.

Xmt Port Frames Disc Xceed Q Length

Number of frames discarded on the Egress due to exceeded queue length.

Xmt Port Bytes Disc Xceed Q Depth

Number of bytes discarded on the Egress due to exceeded queue length.

Xmt Port Frames during LMI Alarm

Number of frames transmitted during LMI logical port alarm.

Xmt Port Bytes during LMI Alarm

Number of bytes transmitted during LMI logical port alarm.

Xmt Frames abort

Number of transmit frames aborted.

Xmt Frames Underrun

Number of frames discarded due to underrun.

Xmt Port Kbps AIR

Transmit Average Information Rate in Kbps.

Xmt Buf Not Available

Number of times the transmitter is turned off.

Parameter	Description
Xmt Port Frames	Number of frames transmitted.
Xmt Port Bytes	Number of bytes transmitted.
Xmt Port Frames FECN	Number of frames transmitted with FECN bit set.
Xmt Port Frames BECN	Number of frames transmitted with BECN bit set.
Xmt Port Frames Disc Xceed Q Length	Number of frames discarded on the Egress due to exceeded queue length.
Xmt Port Bytes Disc Xceed Q Depth	Number of bytes discarded on the Egress due to exceeded queue length.
Xmt Port Frames during LMI Alarm	Number of frames transmitted during LMI logical port alarm.
Xmt Port Bytes during LMI Alarm	Number of bytes transmitted during LMI logical port alarm.
Xmt Frames abort	Number of transmit frames aborted.
Xmt Frames Underrun	Number of frames discarded due to underrun.
Xmt Port Kbps AIR	Transmit Average Information Rate in Kbps.
Xmt Buf Not Available	Number of times the transmitter is turned off.

FR Port Monitor (ILMI/CLLM) Counters

Use the FR Port Monitor (ILMI/CLLM) Counters dialog to monitor FR port (ILMI/CLLM) counters. (See Figure 10-7.)

Figure 10-7: FR Port Monitor (ILMI/CLLM) Counters

The FR Port Monitor (ILMI/CLLM) Counters dialog parameters are described in Table 10-9.

Table 10-9: FR Port Monitor (ILMI/CLLM) Counters

Parameters Description

Row Status Inquiry

Number of Status Inquiry messages received.

Rcv Invalid Req

Number of Invalid Request messages received.

PCV VMI Seq Mismatch

Number of times UNI messages with sequence number mismatches were received.

XMT Status

Number of times Status response messages were transmitted.

XMT Asynch Update

Number of times Asynch Status messages were transmitted.

UNI Signalling Timeout

Number of times UNI Status requests were not received.

Xmt Status Inquiry

Number of Status Inquiry messages were transmitted.

Row Status

Number of times Status response messages were received.

RCV Asynch Update

Number of times Asynch Status messages were received.

RCV NNI Seq Mismatch

Number of times NNI messages with sequence number mismatches were received.

NNI Signalling Timeout

Number of times NNI Status requests were not received.

RCV Frames CLLM

Number of CLLM frames received.

Rcv Bytes CLLM

Number of CLLM bytes received.

Xmt FRMS CLLM

Number of CLLM frames transmitted.

Xmt Bytes CLLM

Number of CLLM bytes transmitted.

CLLM Failures

Number of times an expected CLLM message was not received

Parameters	Description
Row Status Inquiry	Number of Status Inquiry messages received.
Rcv Invalid Req	Number of Invalid Request messages received.
PCV VMI Seq Mismatch	Number of times UNI messages with sequence number mismatches were received.
XMT Status	Number of times Status response messages were transmitted.
XMT Asynch Update	Number of times Asynch Status messages were transmitted.
UNI Signalling Timeout	Number of times UNI Status requests were not received.
Xmt Status Inquiry	Number of Status Inquiry messages were transmitted.
Row Status	Number of times Status response messages were received.
RCV Asynch Update	Number of times Asynch Status messages were received.
RCV NNI Seq Mismatch	Number of times NNI messages with sequence number mismatches were received.
NNI Signalling Timeout	Number of times NNI Status requests were not received.
RCV Frames CLLM	Number of CLLM frames received.
Rcv Bytes CLLM	Number of CLLM bytes received.
Xmt FRMS CLLM	Number of CLLM frames transmitted.
Xmt Bytes CLLM	Number of CLLM bytes transmitted.
CLLM Failures	Number of times an expected CLLM message was not received

ATM-ILMI Port RealTime Counters

Use the ATM-ILMI Port RealTime Counters dialog to monitor ATM-ILMI port RealTime counters. The ATM-ILMI Port RealTime Counters dialog parameters are describe in Table 10-10.

Table 10-10: ATM-ILMI Port RealTime Counters Dialog Parameters
Parameter
Description

SNMP PDU Rx

Number of SNMP packets received.

SNMP Get Request Rx

Number of get request messages received.

SNMP Get-Next Request Rx

Number of get-next messages received.

SNMP Set Request Rx

Number of set messages received.

SNMP Traps Rx

Number of traps received.

SNMP Get-Response Rx

Number of Keep Alive response messages received.

SNMP Get-Response Tx

Number of response messages transmitted.

SNMP Get-Request Tx

Number of Keep Alive get request messages transmitted.

SNMP Traps Tx

Number of trap messages transmitted.

SNMP Invalid PDU Rx

Number of PDUs received.

SNMP AS1 Parse Error

Number of parse errors on ASN.1.

SNMP NoSuchName Err

Number of errors for name not present.

SNMP Too-Big Err

Number of messages received with length greater than 484.

**Table 10-10: ATM-ILMI Port RealTime Counters Dialog Parameters**
Parameter	Description
SNMP PDU Rx	Number of SNMP packets received.
SNMP Get Request Rx	Number of get request messages received.
SNMP Get-Next Request Rx	Number of get-next messages received.
SNMP Set Request Rx	Number of set messages received.
SNMP Traps Rx	Number of traps received.
SNMP Get-Response Rx	Number of Keep Alive response messages received.
SNMP Get-Response Tx	Number of response messages transmitted.
SNMP Get-Request Tx	Number of Keep Alive get request messages transmitted.
SNMP Traps Tx	Number of trap messages transmitted.
SNMP Invalid PDU Rx	Number of PDUs received.
SNMP AS1 Parse Error	Number of parse errors on ASN.1.
SNMP NoSuchName Err	Number of errors for name not present.
SNMP Too-Big Err	Number of messages received with length greater than 484.

ATM RealTime Counters

Use the ATM RealTime Counters dialog to monitor ATM RealTime counters. (See Figure 10-8.)

Figure 10-8: ATM RealTime Counters Dialog

The ATM RealTime Counters dialog parameters are described in Table 10-11.

Parameter	Description
Port Number	Port number.
IngressRcvCells	Number of cells received in the Ingress direction.
Ingress GFC Err Cells	Number of cells received in the Ingress direction with non-zero GFC.
Ingress Vpi/Vci Err Cells	Number of cells received in the Ingress direction with unknown VPI/VCI.
Egress Xmt Cells	Number of cells transmitted in the Egress direction.
PortAlarm DiscCells	Number of cells discarded due to port alarm.
Egress Xmt CLP Set cells	Number of cells transmitted in the Egress direction with CLP bit set.
Egress Xmt EFCI Set cells	Number of cells transmitted in the Egress direction with EFCI bit set.
Port Xmt AIS cells	Number of AIS cells transmitted towards the port.
Port Xmt Segment Lpbk cells	Number of segment loopback cells transmitted in the Ingress direction.
Port Rcv AIS Cells	Number of AIS cells received in the Ingress direction.
Port Rcv FERF Cells	Number of FERF cells received in the Ingress direction.
Port Rx Seg LpbkCells	Number of Segment Loopback cells received in the Ingress direction.
Port Rcv CRC Err OAM Cells	Number of OAM cells received in the Ingress direction with CRC errors.
ingrRcvCLPSetCells	Number of cells received from the port with the CLP bit in the ATM cell header equal to 1.
ingrXmtCells	Number of cells out of the received cells from the port that were sent to the network. This count is taken after policing and Ingress queueing.
egrRcvCells	Number of cells received from the network in the Egress direction.
ingrRcvCellRate	Number of cells received per second from the port in the Ingress direction.
ingrRcvUtilization	Percentage utilization of the port speed in the Ingress direction.
egrXmtCellRate	Number of cells received transmitted to the port in the Egress direction.
EgrXmtUtilization	Percentage utilization of the port speed in the Egress direction.
EgrRcvCellRate	Number of cells received per second from the network in the Ingress receive direction.
EgrRcvUtilization	Percentage utilization of the port speed in the Egress receive direction.
totalIngrQfulldiscardCells	Total number of cells dropped on all the channels on this port because the Ingress Q was full.
txFifoFullCnt	Number of times the AUSM card tries to send a cell but is unable to send because the Transmit FIFO is full. This is not the number of cells dropped.
totalIngrClpSetDiscardCells	Total number of cells dropped on all the channels on this port with CLP bit set.
Rcv Hec Err Cnt	Number of cells with HEC errors.
Rcv Hec Err Sec Cnt	Number of seconds in which HEC errors were present.
Rcv Hec Err SE Sec Cnt	Number of severely errored seconds in which HEC errors were present.
Clear Port Counters?	Clears all ATM RealTime Counters for the port.

Channel Monitoring

There are four dialogs for monitoring channels on a FRSM VHS cards:

FRSM Channel Counters (Rcv)
FRSM Channel Counters(Xmt)
Channel SAR Counters
CESM Channel Counters

These dialogs are described in the sections that follow.

FRSM Channel Counters (Rcv)

Use the FRSM Channel Counters (Rcv) dialog to monitor FRSM channel RCV counters. (See Figure 10-9.)

Figure 10-9: F RSM Channel Counters (Rcv) Dialog

The FRSM Channel Counters (Rcv) dialog parameters are described in Table 10-12.

Table 10-12: FRSM Channel Counters (Rcv) Dialog Parameters

Parameter Description

Rcv Frames

Number of frames received in the Ingress direction.

Rcv Bytes

Number of bytes received in the Ingress direction.

Rcv Frames DE

Number of DE frames received in the Ingress direction.

Rcv Bytes DE

Number of DE bytes received in the Ingress direction.

Rcv Frames Discard

Number of frames discarded in the Ingress direction.

Rcv Bytes Discard

Number of bytes discarded in the Ingress direction.

Rcv Frames Discard Shelf Alarm

Number of frames discarded in the Ingress direction due to Shelf alarm.

Discarded Frames Xceed
Q Depth

Number of frames discarded in the Ingress direction due to exceeded queue depth.

Discarded Bytes Xceed
Q Depth

Number of bytes discarded in the Ingress direction due to exceeded queue depth.

Frames Disc Xceed
DE Thresh

Number of frames discarded in the Ingress direction due to exceeded DE threshold.

Rcv Frames FECN

Number of frames received with FECN bit already set.

Rcv Frames BECN

Number of frames received with BECN bit already set.

Rcv Frames Tagged FECN

Number of frames received that were tagged with FECN bit set.

Rcv Frames Tagged BECN

Number of frames received that were tagged with BECN bit set

Rcv Frames Tagged DE

Number of frames received that were tagged with DE bit set.

Rcv Bytes Tagged DE

Number of bytes received that were tagged with DE bit set.

Rcv Kbps AIR

Received Average Information Rate in Kbps.

Rcv Frames Disc UPC

Number of frames discarded in the Ingress direction due to the UPC measurement in excess of CIR+EIR.

Rcv Frames UnknownProtocols

Number of frames received with unknown protocols. Used only in Service Interworking (SIW) for PDUs that are dropped.

Parameter	Description
Rcv Frames	Number of frames received in the Ingress direction.
Rcv Bytes	Number of bytes received in the Ingress direction.
Rcv Frames DE	Number of DE frames received in the Ingress direction.
Rcv Bytes DE	Number of DE bytes received in the Ingress direction.
Rcv Frames Discard	Number of frames discarded in the Ingress direction.
Rcv Bytes Discard	Number of bytes discarded in the Ingress direction.
Rcv Frames Discard Shelf Alarm	Number of frames discarded in the Ingress direction due to Shelf alarm.
Discarded Frames Xceed Q Depth	Number of frames discarded in the Ingress direction due to exceeded queue depth.
Discarded Bytes Xceed Q Depth	Number of bytes discarded in the Ingress direction due to exceeded queue depth.
Frames Disc Xceed DE Thresh	Number of frames discarded in the Ingress direction due to exceeded DE threshold.
Rcv Frames FECN	Number of frames received with FECN bit already set.
Rcv Frames BECN	Number of frames received with BECN bit already set.
Rcv Frames Tagged FECN	Number of frames received that were tagged with FECN bit set.
Rcv Frames Tagged BECN	Number of frames received that were tagged with BECN bit set
Rcv Frames Tagged DE	Number of frames received that were tagged with DE bit set.
Rcv Bytes Tagged DE	Number of bytes received that were tagged with DE bit set.
Rcv Kbps AIR	Received Average Information Rate in Kbps.
Rcv Frames Disc UPC	Number of frames discarded in the Ingress direction due to the UPC measurement in excess of CIR+EIR.
Rcv Frames UnknownProtocols	Number of frames received with unknown protocols. Used only in Service Interworking (SIW) for PDUs that are dropped.

FRSM Channel Counters (XMT)

Use the FRSM Channel Counters (XMT) dialog to monitor FRSM channel XMT counters. (See Figure 10-10.)

Figure 10-10: FRSM Channel Counters (Xmt) Dialog Parameters

The FRSM Channel Counters (Xmt) dialog parameters are described in Table 10-13.

Table 10-13: FRSM Channel Counters (Xmt) Dialog Parameters

Parameter Description

XMT Frames

Number of frames transmitted.

Xmt Bytes

Number of bytes transmitted.

Xmt Frames FECN

Number of frames transmitted with FECN bit already set.

Xmt Frames BECN

Number of frames transmitted with BECN bit already set.

Xmt Frames DE

Number of DE frames transmitted.

Xmt Bytes DE

Number of DE bytes transmitted.

Xmt Frames Discard

Number of frames discarded on the Egress.

Xmt Bytes Discard

Number of bytes discarded on the Egress.

Xmt Frames Xceed Q Depth

Number of frames discarded on the Egress due to exceeded queue length.

Xmt Bytes Xceed Q Depth

Number of bytes discarded on the Egress due to exceeded queue depth.

Xmt Frames Disc DE Thresh

Number of frames discarded on the Egress due to exceeded
DE threshold.

Xmt Frames Disc PhyLayer Fail

Number of frames discarded on the Egress due to physical layer failure.

Xmt Frames Disc CRC Err

Number of frames discarded on the Egress due to CRC error.

Xmt Frames Disc Reassm Fail

Number of frames discarded on the Egress due to reassembly failure.

Xmt Frames Disc Src Abort

Number of frames discarded on the Egress due to source abort.

Xmt Frames During
LMI Alarm

Number of frames transmitted during LMI logical port alarm.

Xmt Bytes During
LMI Alarm

Number of bytes transmitted during LMI logical port alarm.

Xmt Frames Tagged FECN

Number of frames transmitted that were tagged with FECN bit set.

Xmt Frames Tagged BECN

Number of frames transmitted that were tagged with BECN bit set.

Xmt Kbps AIR

Transmitted Average Information Rate in Kbps.

Xmt Frames Tagged DE

Number of frames transmitted which have been DE tagged at the far end Ingress in excess of CIR.

Xmt Bytes Tagged DE

Number of bytes transmitted which have been DE tagged at the far end Ingress in excess of CIR.

Chan Sec Up Time

Number of seconds the PVC stay in service.

Xmt Frames Invalid CPIs

Number of frames transmitted which have invalid CPI headers.

Xmt Frames Length Violations

Number of frames transmitted with length violations.

Xmt Frames OversizedSDUs

Number of frames transmitted with a size that is beyond the maximum.

Xmt Frames UnknownProtocols

Number of frames transmitted with unknown protocols. Used only in Service Interworking (SIW) for PDUs that are dropped.

Parameter	Description
XMT Frames	Number of frames transmitted.
Xmt Bytes	Number of bytes transmitted.
Xmt Frames FECN	Number of frames transmitted with FECN bit already set.
Xmt Frames BECN	Number of frames transmitted with BECN bit already set.
Xmt Frames DE	Number of DE frames transmitted.
Xmt Bytes DE	Number of DE bytes transmitted.
Xmt Frames Discard	Number of frames discarded on the Egress.
Xmt Bytes Discard	Number of bytes discarded on the Egress.
Xmt Frames Xceed Q Depth	Number of frames discarded on the Egress due to exceeded queue length.
Xmt Bytes Xceed Q Depth	Number of bytes discarded on the Egress due to exceeded queue depth.
Xmt Frames Disc DE Thresh	Number of frames discarded on the Egress due to exceeded DE threshold.
Xmt Frames Disc PhyLayer Fail	Number of frames discarded on the Egress due to physical layer failure.
Xmt Frames Disc CRC Err	Number of frames discarded on the Egress due to CRC error.
Xmt Frames Disc Reassm Fail	Number of frames discarded on the Egress due to reassembly failure.
Xmt Frames Disc Src Abort	Number of frames discarded on the Egress due to source abort.
Xmt Frames During LMI Alarm	Number of frames transmitted during LMI logical port alarm.
Xmt Bytes During LMI Alarm	Number of bytes transmitted during LMI logical port alarm.
Xmt Frames Tagged FECN	Number of frames transmitted that were tagged with FECN bit set.
Xmt Frames Tagged BECN	Number of frames transmitted that were tagged with BECN bit set.
Xmt Kbps AIR	Transmitted Average Information Rate in Kbps.
Xmt Frames Tagged DE	Number of frames transmitted which have been DE tagged at the far end Ingress in excess of CIR.
Xmt Bytes Tagged DE	Number of bytes transmitted which have been DE tagged at the far end Ingress in excess of CIR.
Chan Sec Up Time	Number of seconds the PVC stay in service.
Xmt Frames Invalid CPIs	Number of frames transmitted which have invalid CPI headers.
Xmt Frames Length Violations	Number of frames transmitted with length violations.
Xmt Frames OversizedSDUs	Number of frames transmitted with a size that is beyond the maximum.
Xmt Frames UnknownProtocols	Number of frames transmitted with unknown protocols. Used only in Service Interworking (SIW) for PDUs that are dropped.

Channel SAR Counters

Use the Channel SAR Counters dialog to monitor SAR channel counters. (See Figure 10-11.)

Figure 10-11: Channel SAR Counters Dialog Parameter

The Channel SAR Counters dialog parameters are described in Table 10-14.

Table 10-14: Channel SAR Counters Dialog Parameter

Parameter Description

Xmt Cells

Number of cells transmitted on this channel.

Xmt Cells CLP

Number of CLP cells transmitted on this channel.

Xmt Cells AIS

Number of AIS cells transmitted on this channel.

Xmt Cells FERF

Number of FERF cells transmitted on this channel.

Xmt Cells BCM

Number of BCM cells transmitted on this channel.

Xmt Cells End2End Lpbk

Number of End2End loop cells transmitted on this channel.

Xmt Cells Seg Lpbk

Number of segment loop cells transmitted on this channel.

Rcv Cells

Number of cells received on this channel.

Rcv Cells CLP

Number of CLP cells received on this channel.

Rcv Cells AIS

Number of AIS cells received on this channel.

Rcv Cells FERF

Number of FERF cells received on this channel.

Rcv Cells BCM

Number of BCM cells received on this channel.

Rcv Cells End2End Lpbk

Number of End2End cells received on this channel.

Rcv Cells Seg Lpbk

Number of segment loop cells received on this channel.

Rcv Cells Disc OAM

Number of cells that had CRC errors on OAM cells.

Parameter	Description
Xmt Cells	Number of cells transmitted on this channel.
Xmt Cells CLP	Number of CLP cells transmitted on this channel.
Xmt Cells AIS	Number of AIS cells transmitted on this channel.
Xmt Cells FERF	Number of FERF cells transmitted on this channel.
Xmt Cells BCM	Number of BCM cells transmitted on this channel.
Xmt Cells End2End Lpbk	Number of End2End loop cells transmitted on this channel.
Xmt Cells Seg Lpbk	Number of segment loop cells transmitted on this channel.
Rcv Cells	Number of cells received on this channel.
Rcv Cells CLP	Number of CLP cells received on this channel.
Rcv Cells AIS	Number of AIS cells received on this channel.
Rcv Cells FERF	Number of FERF cells received on this channel.
Rcv Cells BCM	Number of BCM cells received on this channel.
Rcv Cells End2End Lpbk	Number of End2End cells received on this channel.
Rcv Cells Seg Lpbk	Number of segment loop cells received on this channel.
Rcv Cells Disc OAM	Number of cells that had CRC errors on OAM cells.

CESM Channel Counters

Use the CESM Channel Counters dialog to monitor CESM channel counters. (See Figure 10-12.)

Figure 10-12: CESM Channel Counters

The CESM channel counters dialog parameters are described in Table 10-15.

Table 10-15: CESM Channel Counters

Parameter Description

Cells Played Out

Number of cells played out to T1/E1 interface. It excludes cells that were discarded for any reason.

Cells Generated

Number of cells generated from the T1/E1 interface and sent towards the network.

Hdr Errs

Number of AAL-1 header errors detected and possible corrected. Header errors include correctable and uncorrectable CRC, plus bad parity.

Pointer Reframes

Number of events in which the AAL-1 reassembler found that an SDT pointer is not where it is expected and the pointer must be reacquired.

Lost Cells

Number of cells lost in the Egress direction due to AAL-1 header errors and missing cells.

Buf Underflows

Number of buffer underflows in the Egress direction.

Buf Overflows

Number of buffer overflows in the Egress direction.

Ingress Disc. Bytes

Number of bytes discarded due to shelf alarm in the Ingress direction from port data.

Egress Underflow Cells

Number of cells inserted in case of Egress buffer underflow.

Drop Bytes

Number of bytes discarded in the Egress direction because of Egress buffer overflow.

Sequence Mismatch Cnt

Number of sequence mismatches.

Monitoring ATM Lines

Use the ATM Line dialog to monitor ATM lines. (See Figure 10-13.)

Figure 10-13: ATM Line Dialog Parameters

The ATM Line dialog parameters are described in Table 10-15.

Table 10-16: ATM Lines Dialog Parameters

Parameter Description

Total Rcv Cells

Number of cells received in the egress direction.

Total XMT Cells

Number of cells transmitted in the egress direction.

RcvHecError Cells

Number of cells with HEC error.

Parameter	Description
Total Rcv Cells	Number of cells received in the egress direction.
Total XMT Cells	Number of cells transmitted in the egress direction.
RcvHecError Cells	Number of cells with HEC error.

Monitoring Broadband Interface

Use the Broadband Interface dialog to monitor broadband interfaces. (See Figure 10-14.)

Figure 10-14: Broadband Interface Dialog Parameters

The Broadband Interface dialog parameters are described in Table 10-17.

**Table 10-17: Broadband Interface Dialog Parameters**
Parameter	Description
Total Cells	Total number of cells (VC plus Qbin) that belong to this Interface.
RcvRn Cells	Total number of RM cells received.
RcvClp0Cells	Total number of CLP-0 cells received.
RcvClp1Cells	Total number of CLP-1 cells received.
RcvClp0DiscCells	Total number of CLP-0 cells discarded at Ingress.
RcvClp1DiscCells	Total number of CLP-1 cells discarded at Ingress.
Xmt0Am Cells	Total number of OAM cells transmitted.
XmtRm Cells	Total number of RM cells transmitted.
XmtCLP0Cells	Total number of CLP-0 cells transmitted.
XmtCLP1Cells	Total number of CLP-1 cells transmitted.

Monitoring ILMI

Use the ILMI dialog to monitor ILMI. (See Figure 10-15.)

Figure 10-15: I LMI Dialog

The ILMI dialog parameters are described in Table 10-18.

Table 10-18: ILMI Dialog Parameters
Parameter
Description

SNMP Received

Number of snmp packets received on this logical interface.

GetReq Rcvd

Number of get request messages received.

Get Next Req Rcvd

Number of get-next messages received.

Set Req Rcvd

Number of set messages received.

Trap Rcvd

Number of traps received.

Get Rcsp Rcvd

Number of Keep Alive response messages received.

Get Rcsp Tx

Number of Keep Alive get request messages transmitted.

Get Req Tx

Number of get request messages transmitted.

No Such Name Err

Number of errors for name not present.

Too big Err

Number of messages received with len > 484.

**Table 10-18: ILMI Dialog Parameters**
Parameter	Description
SNMP Received	Number of snmp packets received on this logical interface.
GetReq Rcvd	Number of get request messages received.
Get Next Req Rcvd	Number of get-next messages received.
Set Req Rcvd	Number of set messages received.
Trap Rcvd	Number of traps received.
Get Rcsp Rcvd	Number of Keep Alive response messages received.
Get Rcsp Tx	Number of Keep Alive get request messages transmitted.
Get Req Tx	Number of get request messages transmitted.
No Such Name Err	Number of errors for name not present.
Too big Err	Number of messages received with len > 484.

Monitoring SRM Counters

The SRM Counters dialog parameters are described in Table 10-19.

Table 10-19: SRM Counters Dialog Parameters
Parameter
Description

Rcv PERR Cnt

Number of P-bit Parity Errors.

Rcv FEBE Cnt

Number of Far-End Block Errors.

**Table 10-19: SRM Counters Dialog Parameters**
Parameter	Description
Rcv PERR Cnt	Number of P-bit Parity Errors.
Rcv FEBE Cnt	Number of Far-End Block Errors.

Monitoring IMATM Counters

The IMA Group Counters dialog parameters are described in Table 10-20.

Table 10-20: IMA Group Counters Dialog Parameters
Parameter
Description

Rx ACP Cells

Number of ACP cells received.

Tx ACP Cells

Number of ACP cells transmitted on this IMA group.

Tx ACP Cells Missed

Number of ACP cells that could not be transmitted on this IMA group due to lack of resources (buffers).

Group Rx HEC Err Count

Number of HEC errored cells received on all the links currently in the IMA group.

Group Rx HEC Err Secs

Number of HEC errored seconds for the IMA group; that is, the number of seconds in which at least one link in the IMA group experienced an HEC error.

IMA Grp Rcv HEC Err SE Sec Count

Number of Severely Errored Seconds received on all the links currently in the IMA group.

Parameter	Description
Cells Played Out	Number of cells played out to T1/E1 interface. It excludes cells that were discarded for any reason.
Cells Generated	Number of cells generated from the T1/E1 interface and sent towards the network.
Hdr Errs	Number of AAL-1 header errors detected and possible corrected. Header errors include correctable and uncorrectable CRC, plus bad parity.
Pointer Reframes	Number of events in which the AAL-1 reassembler found that an SDT pointer is not where it is expected and the pointer must be reacquired.
Lost Cells	Number of cells lost in the Egress direction due to AAL-1 header errors and missing cells.
Buf Underflows	Number of buffer underflows in the Egress direction.
Buf Overflows	Number of buffer overflows in the Egress direction.
Ingress Disc. Bytes	Number of bytes discarded due to shelf alarm in the Ingress direction from port data.
Egress Underflow Cells	Number of cells inserted in case of Egress buffer underflow.
Drop Bytes	Number of bytes discarded in the Egress direction because of Egress buffer overflow.
Sequence Mismatch Cnt	Number of sequence mismatches.

Parameter	Description
Rx ACP Cells	Number of ACP cells received.
Tx ACP Cells	Number of ACP cells transmitted on this IMA group.
Tx ACP Cells Missed	Number of ACP cells that could not be transmitted on this IMA group due to lack of resources (buffers).
Group Rx HEC Err Count	Number of HEC errored cells received on all the links currently in the IMA group.
Group Rx HEC Err Secs	Number of HEC errored seconds for the IMA group; that is, the number of seconds in which at least one link in the IMA group experienced an HEC error.
IMA Grp Rcv HEC Err SE Sec Count	Number of Severely Errored Seconds received on all the links currently in the IMA group.

Table of Contents

Monitoring Lines