|
|
This section discusses the objectives, audience, organization, and conventions of the WAN CiscoView for the MGX 8230 publication.
Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated monthly. Therefore, it might be more up to date than printed documentation. To order additional copies of the Documentation CD-ROM, contact your local sales representative or call customer service. The CD-ROM package is available as a single package or through an annual subscription. You can also access Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.
This publication provides instructions for using WAN CiscoView for the MGX 8230. WAN CiscoView is a GUI-based device management software application that allows you to
This publication is intended for anyone who operates or manages a WAN and has a general understanding of data communications concepts, general knowledge of UNIX, and knowledge of the interfaces used by devices connected to their WAN.
This publication is organized as follows:
Chapter 1, "Product Overview," presents an overview of WAN CiscoView.
Chapter 2, "Configuring AUSM 8port Cards," provides instructions for displaying and configuring AUSM 8-port card information on the WAN CiscoView interface.
Chapter 3, "Configuring CESM Cards," provides instructions for displaying and configuring CESM information on the WAN CiscoView interface.
Chapter 4, "Configuring FRSM-2CT3 Cards," provides instructions for displaying and configuring FRSM-2CT3 information on the WAN CiscoView interface.
Chapter 5, "Configuring FRSM-2T3/E3 Cards," provides instructions for displaying and configuring FRSM-2T3/E3 information on the WAN CiscoView interface.
Chapter 6, "Configuring FRSM 8port Cards," provides instructions for displaying and configuring FRSM 8-port card information on the WAN CiscoView interface.
Chapter 7, "Configuring FRSM-HS1/B Cards," provides instructions for displaying and configuring FRSM-HS1/B information on the WAN CiscoView interface.
Chapter 8, "Configuring FRSM-HS2 Cards," provides instructions for displaying and configuring FRSM-HS2 information on the WAN CiscoView interface.
Chapter 9, "Configuring PXM Cards," provides instructions for displaying and configuring PXM information on the WAN CiscoView interface.
Chapter 10, "Monitoring Lines," provides instructions for monitoring line information on the
WAN CiscoView interface.
Command descriptions use these conventions:
Examples use the following conventions:
screen font.
 |
Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the publication. |
The following documentation may be useful if you are using WAN CiscoView for the MGX 8230:
Additional references are listed in the following table:
| MGX 8230 Release 1.0 Related Documentation | Documentation Description |
|---|---|
Cisco MGX 8230 Installation and Configuration Release 1.0 DOC-78 10616= | Provides installation instructions for the MGX8230. |
Cisco MGX 8230 Command Reference Release 1.0 DOC-78 10904= | Provides detailed information on the general command line interface commands |
Cisco BPX 8600 Series Installation and Configuration Release 9.2 DOC-786326= | Provides installation instructions for the BPX broadband switch. |
Cisco BPX 8600 Series Reference Release 9.2 DOC-786325= | Provides a general description and technical details of the |
Cisco IGX 8400 Series Installation and Configuration Release 9.2 DOC-786723= | Provides installation instructions for the IGX multiband switch. |
Cisco IGX 8400 Series Reference Release 9.2 DOC-786736= | Provides a general description and technical details of the |
Cisco WAN Switching Command Reference DOC-786721= | Provides detailed information on the general command line interface commands. |
Cisco WAN Switching SuperUser Command Reference Release 9.2 DOC-786722= | Provides detailed information on the command line interface commands requiring SuperUser access authorization. |
WAN CiscoView for the MGX 8250 Multiservice Gateway Release 1.0 DOC-7810925= | Provides instructions for using WAN CiscoView for the MGX 8250 multiservice gateway. |
WAN CiscoView for the IGX 8400 Switches DOC-786541= | Provides instructions for using WAN CiscoView for the IGX 8400. |
WAN CiscoView for the BPX 8600 Switches DOC-786539= | Provides instructions for using WAN CiscoView for the BPX 8600. |
Cisco WAN Manager Installation for Solaris DOC-78=785875= | Provides procedures for installing Release 9.2 of the Cisco WAN Manager (CWM) network management system on Solaris systems. |
Cisco WAN Manager Operations Release 9.2 DOC-785876= | Provides procedures for operating Release 9.2 of the Cisco WAN Manager (CWM) network management system. |
Cisco WAN Manager SNMP Service Agent DOC-785878= | Provides information about the Cisco WAN Manager Simple Network Management Protocol (SNMP) Service Agent components and capabilities. |
Cisco WAN Manager Database Interface DOC-785877= | Provides the information to gain direct access to the Cisco WAN Manager Informix OnLine database that is used to store information about the elements within your network. |
Posted: Mon Oct 2 17:31:15 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.