|
|
Select the card (on both the rear or front view) to display the Card Configuration dialog by doing one of the following:
The ASI-T3/E3 Card Category menu contains the following items:
These dialogs are described in the sections that follow.
Use Card Configuration dialog to view ASI-T3/E3 card characteristics, hardware, firmware, and status information. The Card Configuration dialog parameters are described in Table 3-1.
| Parameter | Description |
|---|---|
Slot No. | Number that identifies the slot the card is installed in. |
Card Status | Status of the card. Examples are:
|
BackCard Type | Back card type. |
BackCard Serial # | Serial number on the card. |
BackCard Revision | Model number and hardware revision of the back card. |
No. Ports (Backcard) | Number of ports on the back of the card. |
Select the line (on the rear view) to display the Intf Configuration dialog by doing one of the following:
The ASI T3/E3 Intf menu item provides one of more of the following configuration dialogs. The dialogs provided differ according to the interface:
These dialogs are described in the sections that follow.
Use the Phsyical Line Configuration dialog to view ASI T3/E3 physical line features. The parameters are described in Table 3-2.
| Parameter | Description |
Card | Number that identifies the slot the card is in. |
Line | Number of the line. |
Interface Type | Line Interface type. |
Vtrk | Virtual trunk number. |
Service | Type of service for the line. Choose one from the popup menu:
|
| Parameter | Description |
Admin Status | Administrative status of the line. Choose one from the popup menu:
|
Oper Status | Operational status of the line. Can be one of the following:
|
Use the ds3 Line Configuration dialog to view ASI T3/E3 DS3 line configuration features.
The ds3 Line Configuration dialog parameters are described in Table 3-3.
| Parameter | Description |
Card | Number of the slot the card is in. |
Line | Line number. |
Line Alarm Status Information | Information on the status of the line alarm. Can be one of:
|
Line Coding | Type of ZCS line coding used on this line. Can be ds3Other or ds3B3ZSe3HDB3 |
Clock Source | Transmit clock source. Can be one of: loopTiming, localTiming, throughTiming. |
Line Local Loopback | Current local loopback status. Choose one of the following from the pop-up menu: enable or disable |
Line Remote Loopback | Line remote loopback. Choose one of the following from the pop-up menu: enable or disable |
The Logical Ports menu Item provides two dialogs:
These dialogs are described in the subsections that follow.
Use the Port Config dialog to view ASI T3/E3 DS3 port configuration features. The Port Config dialog parameters are described in Table 3-4.
| Parameter | Description |
Card | Number that identifies the slot the card is in. |
Line | Number of the line. |
Admin Status | Administrative status of the port. Can be up, down, modify, or writeOnly. The default is writeOnly. |
Operational Status | Operational status of the port. Can be one of: added, up, deleted. |
Port Type | Type of port. Choose one of the following from the pop-up menu: uni (user-to-network interface) or nni (network-to-node interface). |
Port Interface Type | Interface type of the port. Can be one of:
|
No. of VCs terminating on this port | Number of Virtual Circuits (VC) that terminate on this port. |
Port Speed (cps) | Speed of the port in cells per second. |
Percentage Utilization | Percentage utilization is disabled, the bandwidth for the connections terminating on the port will be used to determine the port load. If percentage utilization is enabled, the bandwidth for the connection is multiplied by the percentage utilization for the connection to determine the port load. Choose one of the following from the pop-up menu: disable or enable. |
Port Management Protocol | Port management protocol used for this port. Can be one of: LMI, ILMI, none. |
Use the Port Real Time Counters dialog to view ASI T3/E3 ds3 port Real Time counters. The Port Real Time Counters dialog parameters are described in Table 3-5.
| Parameter | Description |
Card Number | Number of the slot the current card is installed in. |
Port Number | Port number of the logical port for that line. |
Unknown VPI/VCI | Number of cells discarded due to unknown address, either unknown VPI (Virtual Path Identifier) or unknown VCI (Virtual Channel Identifier). |
# Cell Buff OverFlows | Number of times the port has incurred a cell buffer overflow. |
# Cells Discarded By IngressCU | Number of cells dropped by Ingress CU (Control Service Unit). |
# Rx Cells with AIS | Total number of cells received with Alarm Indicator Signal. |
# Rx Cells with FERF | Total number of cells received with FERF (Far End Reporting Failure). |
#Rx Cells | Total number of cells received. |
# Rx Cells with CLP | Number of cells received with Cell Loss Priority set. |
# Rx Cells with EFCI | Number of cells received with EFCI (Explicit Forward Congestion Indication) set. |
# Tx Cells | Total number of cells transmitted. |
# Tx Cells with CLP | Number of cells transmitted with Cell Loss Priority set. |
# Tx Cells with EFCI | Number of cells transmitted with EFCI (Explicit Forward Congestion Indication) set. |
# Cells Discarded due to Parity Error | Number of cells dropped because of parity errors. |
Posted: Mon Jun 7 20:04:12 PDT 1999
Copyright 1989-1999©Cisco Systems Inc.