|
|
There are four ways to select the interface (the rear view of the card must be displaying) to display the appropriate Interface Monitor dialog:
The Monitor Trunks category provides dialogs to monitor the following:
These dialogs are described in the sections that follow.
The ATM Routing Trunks Dialog Paramters are described in Table 18-1.
| Parameter | Description |
|---|---|
Transmit CBR cells dropped | Total constant bit rate transmitted cells dropped. |
Transmit VBR cells dropped | Total variable bit rate transmitted cells dropped. |
Transmit ABR cells dropped | Total available bit rate transmitted cells dropped. |
Total cells transmitted on line | Total cells transmitted on the line. |
Total cells received from port | Total cells received from the port. |
The FastPacket Routing Trunks Dialog Paramters are described in Table 18-2.
| Parameter | Description |
|---|---|
FastPacket CRC errors | Total number of packets with CRC errors. |
Total packets transmitted | Total number of packets transmitted. |
Out of Frame errors | Total number of packets received with Out of Frame errors. |
The Monitor Interfaces menu provides dialogs to monitor the following:
Use the DS1 Lines dialog to monitor ds1 line performance. The DS1 Physical Lines Dialog Paramters are described in Table 18-3.
| Parameter | Description |
|---|---|
# Bipolar Violations | Number of bipolar violations. |
# OutofFrame Errs | Number of Out of Frame. |
# LossofSignal Errs | Number of loss of signal errors. |
# OutofMultiFrame Errs | Number of Out of MultiFrame errors. |
# Frameslip Errs | Number of Frameslip errors. |
# Framebit Errs | Number of Framebit errors. |
# Line Detect CRC Errs | Number of line detection CRC errors. |
Allone in TimeSlot | Number of AllOne in TimeSlot 16 errors. |
Use the Physical Lines dialog to monitor ds1 line performance. The Physical Lines Dialog Parameters are described in Table 18-4.
| Parameter | Description |
|---|---|
Tx CBR Cells Dropped | Total constant bit rate transmitted cells dropped. |
Tx VBR Cells Dropped | Total variable bit rate transmitted cells dropped. |
Tx ABR Cells Dropped | Total available bit rate transmitted cells dropped. |
Total Cells Tx on Line | Total cells transmitted on the line. |
Total Cells Rx from Port | Total cells received from the port. |
This dialog shows the real time counters for the DS3 physical interface. The DS3 Line Real Time Counters dialog parameters are described in Table 18-5.
| Parameter | Description |
|---|---|
Out of Frame | Number of Out of Frame errors. |
LineCode Violations | Number of line code violations errors. |
C-bit Parity Code Violations | Number of C-bit parity code violations errors. |
PacketHeader CRC Errors | Number of packet header CRC errors. |
PLCP (Physical Layer Convergence Protocol) Out of Frame Errors | Number of physical layer convergence protocol Out of Frame errors. |
Loss of Signal Errors | Number of loss of signal errors. |
P-bit Parity Code Violations | Number of P-bit parity code violations errors. |
PLCP (Physical Layer Convergence Protocol) BIP-8 (Bframe Parity Error) Code Violations | Number of physical layer convergence protocol BIP-8 code violations errors. |
Cell Header Checksum Errors | Number of ATM cell header checksum errors. |
This dialog shows the real time counters for the sonet physical interface. The Sonet Line Real Time Counters dialog parameters are described in Table 18-6.
| Parameter | Description |
|---|---|
Out of Frame | Number of Out of Frame errors. |
Loss of Signal Errors | Number of loss of signal errors. |
Cell Header Checksum Errors | Number of ATM cell header checksum errors. |
The Monitor Ports menu provides dialogs to monitor the following:
You can view the parameters in line graph format by invoking the HP OpenView Grapher application. To do this, select the parameters you want by clicking once on each, then click the Grapher button. The Monitor dialog remains open.
To display the configuration parameters for a particular port, select the name of the category from the Category popup menu at the top of the dialog.
This dialog shows the ATM logical ports for a particular line. The ATM Port Real Time Counters dialog parameters are described in Table 18-7.
| Parameter | Description |
|---|---|
# Unknown VPI/VCI | Number of cells discarded due to unknown address, either unknown VPI (Virtual Path Identifier) or unknown VCI (Virtual Channel Identifier). |
# Cell Buff Overflows | Number of times the port has incurred a cell buffer overflow. |
# Cells Discarded Due to ParityErr | Number of cells dropped because of parity errors. |
# Cells Discarded by IngressCU | Number of cells dropped by Ingress CU (Control Service Unit). |
# Rx Cells with AIS | Total number of cells received with Alarm Indicator Signal. |
# Rx Cells with FERF | Total number of cells received with FERF (Far End Reporting Failure). |
# Rx Cells | Total number of cells received. |
# Rx Cells with CLP | Number of cells received with Cell Loss Priority set. |
# Rx Cells with EFCI | Number of cells received with EFCI (Explicit Forward Congestion Indication) set. |
# Tx Cells | Total number of cells transmitted. |
# Tx Cells with CLP | Number of cells transmitted with Cell Loss Priority set. |
# Tx Cells with EFCI | Number of cells transmitted with EFCI (Explicit Forward Congestion Indication) set. |
This dialog shows the real time counters for Frame Relay ports.
FR Real Time Counters
The Physical Lines dialog parameters are describe in Table 18-8.
| Parameter | Description |
|---|---|
Rx Bytes | Traffic received in bytes. |
Rx Frms | Traffic received in bytes. |
Tx Bytes | Traffic transmitted frames. |
Tx Frms | Traffic transmitted in frames. |
Tx FECN Frms | Total number of frames transmitted with the FECN bit set. |
Tx BECN Frms | Total number of frames transmitted with the BECN bit set. |
# DE Frms Dropped | Total number of DE frames dropped due to queue threshold met. |
Rx Frm CRC Errs | Total number of frames received with CRC errors. |
Frms with Illegal Fmts | Total number of frames received with illegal formats. |
Rx Alignment Err Frms | Total number of frames dropped with non-bytes aligned payload. |
Rx Illegal Len Frms | Total number of frames received with illegal length. |
# DMA Overruns | Total number of DMA overruns. |
Unknown DLCIs | Total number of received frames with invalid/unknown DLCI dropped. |
LMI Fail Frms | Total number of LMI failure frames. |
LMI Fail Bytes | Total number of LMI failure bytes. |
This dialog shows the Real Time counters for CLLM ports.
CLLM Real Time Counter
The Parameters are described in Table 18-9.
| Parameter | Description |
|---|---|
CLLM Tx Frms | Traffic transmitted frames. |
CLLM Rx Frms | Traffic received in frames. |
CLLM Tx Bytes | Traffic transmitted bytes. |
CLLM Rx Bytes | Traffic received in bytes. |
Posted: Mon Jun 7 20:28:09 PDT 1999
Copyright 1989-1999©Cisco Systems Inc.