Table of Contents

Cisco Cabinet Configurations

This appendix illustrates the space requirements for various system configurations in the Cisco cabinet and a typical cable management setup. It also contains a table with the height of Cisco WAN switching components in inches, centimeters, and rack-mount units (RMUs). This can help in the calculation of height requirements for individual system configurations. The last illustration shows the bracket installation in the Cisco cabinet (for a BPX 8620 node, in this case). The illustrated components are the:

• BPX 8620

• IGX 8410, 8420, and 8430 switches

• Cisco MGX 8220 edge concentrator

• Service Expansion Shelf

The sequence of illustrations in this chapter is as follows:

• Cisco Cabinet

• Cable Management

• Examples of System Configurations

• Table of Component Heights

Figure C-1: Back View of Cisco Cabine
t

Figure C-2: Cable Management

Figure C-3: IGX 8430 Switch, AC and DC-Powered

Figure C-4: IGX 8420 Switch, DC-Powered and AC-Powered

Figure C-6: IGX 8410 Switch, AC or DC-Powered

Figure C-7: Single BPX Switch, AC and DC-Powered

Figure C-8: Single BPX 8620 Node and MGX 8220 Edge Concentrator, AC and DC-Powered

Figure C-9: BPX Node, MGX 8220 Edge Concentrator, and ESP, AC and DC-Powered

Figure C-10: BPX Node With 2 ESP Systems and 3 MGX 8220 Shelves, DC-Powere
d
Figure C-11: Six MGX 8220 Edge Concentrators, DC-Powere
d
Figure C-12: BPX Node With Three MGX 8220 Edge Concentrators, DC-Powered

Table C-1: Table of Cisco Cabinet and Component Heights

Components	Unit Height
	Inches	CM	RMUs
MGX 8220 Card Cage	8.75	22.225	5
MGX 8220 AC Power Supply shelf	5.25	13.335	3
MGX 8220 Booster Fan Assembly	3.5	8.89	2
MGX 8220 Cooling Assembly	5.25	13.335	3
MGX 8220 Exhaust Plenum	3.5	8.89	2
BPX AC Power Supply shelf	5.25	13.335	3
BPX Card Cage	22.75	57.785	13
IGX AC Power Supply shelf	5.25	13.335	3
IGX Booster Fan Assembly	3.5	8.89	2
IGX Card Cage	17.5	44.45	10
IGX Cooling Assembly	5.25	13.335	3
IGX Exhaust Plenum	3.5	8.89	2
IGX Node	24.5	62.23	14
Service Expansion Shelf, DC option	12.25	31.1	7
Service Expansion Shelf, AC option	14.00	35.6	8
VNS	5.25	13.335	3
Cabinet	Unit Height
	Inches	CM	RMUs
Cisco Cabinet	71.75	1822.45	41

---

Note The depth of the Cisco-supplied cabinet is 36 inches, the width is 23 inches, and the weight (empty of equipment with side panels installed) is 233 pounds.

---

Figure C-13: Mounting Brackets (BPX Example)

Posted: Thu Mar 30 19:24:52 PST 2000
Copyright 1989 - 2000©Cisco Systems Inc.