Table of Contents

Introduction

This document provides installation and configuration instructions for the BPX 8600 Series wide-area switches. It is divided into a number of parts. This is the first part that tells you very briefly what's in the document. If you see text or a reference underlined in this document, you can click on it to go to the linked area.

• PART 1, Introduction---Summarizes what's in this document.

• PART 2, Quickstart---Provides a quick start guide to installation and an abbreviated configuration guide. Detailed installation and configuration procedures are provided in their separate sections of this document.

• PART 3, Installation---Provides detailed installation instructions.

• PART 4, Configuration, General---Provides detailed configuration examples.

• PART 5, Configuration, MPLS---Provides detailed configuration examples.

• PART 6, Operation and Management---Provides Operation and Management and NMS information.

• PART 7, ---Provides procedures to upgrade MPLS networks from BPX switch software Release 9.1 and BXM firmware Release C, to switch software Release 9.2.x and BXM Firmware Release E.

• PART 8, Reference---Provides reference information, cabling, i.e.

Posted: Mon Oct 4 19:21:24 PDT 1999
Copyright 1989-1999©Cisco Systems Inc.