|
|
This appendix illustrates typical cable management and space requirements for various Extended Services Processor system configurations in a Cisco-supplied cabinet. It also contains a table with the height of Cisco components in inches, centimeters, and rack-mount units (RMUs). This can help in the calculation of height requirements for individual setups. The last illustration shows the bracket installation in the Cisco-supplied cabinet (for a BPX 8620, in this case). The information is grouped as follows:
Table K-1 lists Cisco-supplied cabinet dimensions and the heights of components that may be installed in the cabinet.
| Components | Unit Height | ||
|---|---|---|---|
| Inches | CM. | RMUs | |
| MGX 8220 Card Cage | 8.75 | 22.225 | 5 |
| MGX 8220 AC Power Supply shelf | 5.25 | 13.335 | 3 |
| MGX 8220 Booster Fan Assembly | 3.5 | 8.89 | 2 |
| MGX 8220 Cooling Assembly | 5.25 | 13.335 | 3 |
| MGX 8220 Exhaust Plenum | 3.5 | 8.89 | 2 |
| BPX 8620 AC Power Supply shelf | 5.25 | 13.335 | 3 |
| BPX 8620 Card Cage | 22.75 | 57.785 | 13 |
| ESP | 5.25 | 13.335 | 3 |
| Cabinet | Unit Height | ||
| Inches | CM. | RMUs | |
| Cisco-Supplied Cabinet | 71.75 | 1822.45 | 41 |
Figure K-1 shows a back view of an empty Cisco-supplied cabinet.
Figure K-2 shows a typical cable management configuration in a Cisco-supplied cabinet.
Figure K-3 and Figure K-4 show several WAN Service Node (BPX 8620/MGX 8220/ESP) configurations.
|
|