|
|
This section discusses the objectives, audience, organization, and conventions of the WAN CiscoView for Release 2.1 of the MGX 8850 publication.
This publication provides instructions for using WAN CiscoView for Release 2.0 of the MGX 8850.
WAN CiscoView is a GUI-based device management software application that allows you to:
This publication is intended for anyone who operates or manages a WAN and has a general understanding of data communications concepts, general knowledge of UNIX, and knowledge of the interfaces used by devices connected to their WAN.
This publication is organized as follows:
Chapter 1, "Product Overview," presents an overview of WAN CiscoView.
Chapter 2, "Displaying and Configuring Nodes," provides instructions for displaying and configuring node information on the WAN CiscoView interface.
Chapter 3, "Displaying and Configuring AXSM Cards," provides instructions for displaying and configuring AXSM information on the WAN CiscoView interface.
Chapter 4, "Configuring PXM45 Cards," provides instructions for displaying and configuring PXM45 card information on the WAN CiscoView interface.
Command descriptions use these conventions:
Examples use the following conventions:
screen font.
 |
Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the publication. |
The following documentation contain information necessary for the understanding and operation of WAN CiscoView for Release 2 of the MGX 8850:
The following Cisco publications contain additional information related to the operation of WAN CiscoView for Release 2 of the MGX 8850.
| Documentation | Description |
Cisco MGX 8850 Hardware Installation, Release 2 DOC-7810351= | Provides a detailed description for installing the MGX 8850 switch in a restricted access location. |
Cisco MGX 8850 Routing Switch Command Reference, Release 2 DOC-7810467= | Describes and lists the user-accessible CLI1 for the MGX 8850 ATM edge switch. |
Cisco MGX 8850 Switch Software Configuration Guide, Release 2 DOC-7810352= | Describes how to configure the MGX 8850 to operate as an ATM core switch or as an ATM edge switch. |
Cisco PXM SNMP Reference, Release 2 DOC-7811276= | Provides information on all supported MIB2 objects, support restrictions, traps, and alarms for the PXM45 Module. |
Cisco AXSM SNMP Reference, Release 2 DOC-7811369= | Provides information on all supported MIB objects, support restrictions, traps, and alarms for the AXSM Module. |
Cisco PNNI SNMP Reference, Release 2 DOC-7811277= | Provides information on all supported MIB objects, support restrictions, traps, and alarms for the PNNI Module. |
Cisco WAN Manager Installation for Solaris, Release 10 DOC-7810308= | Provides procedures for installing Release 10 of the CWM network management system on Solaris systems. |
Cisco WAN Manager User's Guide, Release 10 DOC-7810658= | Provides procedures for operating Release 10 of the CWM network management system. |
Cisco WAN Manager SNMP Service Agent Guide, Release 10 DOC-7810786= | Provides information about the CWM Simple Network Management Protocol Service Agent components and capabilities. |
Cisco WAN Manager Database Interface Guide, DOC-7810785= | Provides the information to gain direct access to the CWM Informix OnLine database that is used to store information about the elements within your network. |
| 1CLI = command line interface 2MIB = Management Information Base |
The following documentation contains information about using the Cisco WAN Manager (CWM) network management system that works with the MGX 8850 Release 2 switch.
| Documentation | Description |
|---|---|
Cisco WAN Manager Installation for Solaris, Release 10 DOC-7810308= | Provides procedures for installing Release 10 of the CWM network management system on Solaris systems. |
Cisco WAN Manager User's Guide, Release 10 DOC-7810658= | Provides procedures for operating Release 10 of the CWM network management system. |
Cisco WAN Manager SNMP Service Agent Guide, Release 10 DOC-7810786= | Provides information about the CWM Simple Network Management Protocol Service Agent components and capabilities. |
Cisco WAN Manager Database Interface Guide, Release 10 DOC-7810785= | Provides the information to gain direct access to the CWM Informix OnLine database that is used to store information about the elements within your network. |
This publication uses the following conventions to convey instructions and information.
Command descriptions use these conventions:
Examples use these conventions:
screen font.
Notes, tips, cautions, and warnings use the following conventions and symbols:
|
Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in this manual. |
 |
TimeSaver Means the described action saves time. You can save time by performing the action described in the paragraph. |
 |
Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data. |
The following sections describe how you can get Cisco documentation and documentation updates.
You can access the most current Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.
Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM is updated monthly. Therefore, it is probably more current than printed documentation. The CD-ROM package is available as a single unit or as an annual subscription.
Registered CCO users can order the Documentation CD-ROM and other Cisco Product documentation through our online Subscription Services at http://www.cisco.com/cgi-bin/subcat/kaojump.cgi.
Nonregistered CCO users can order documentation through a local account representative by calling Cisco's corporate headquarters (California, USA) at 408 526-4000 or, in North America, call 800 553-NETS (6387).
Cisco provides Cisco Connection Online (CCO) as a starting point for all technical assistance. Warranty or maintenance contract customers can use the Technical Assistance Center. All customers can submit technical feedback on Cisco documentation using the web, e-mail, a self-addressed stamped response card included in many printed docs, or by sending mail to Cisco.
Cisco continues to revolutionize how business is done on the Internet. Cisco Connection Online is the foundation of a suite of interactive, networked services that provides immediate, open access to Cisco information and resources at anytime, from anywhere in the world. This highly integrated Internet application is a powerful, easy-to-use tool for doing business with Cisco.
CCO's broad range of features and services helps customers and partners to streamline business processes and improve productivity. Through CCO, you will find information about Cisco and our networking solutions, services, and programs. In addition, you can resolve technical issues with online support services, download and test software packages, and order Cisco learning materials and merchandise. Valuable online skill assessment, training, and certification programs are also available.
Customers and partners can self-register on CCO to obtain additional personalized information and services. Registered users may order products, check on the status of an order and view benefits specific to their relationships with Cisco.
You can access CCO in the following ways:
You can e-mail questions about using CCO to cco-team@cisco.com.
The Cisco Technical Assistance Center (TAC) is available to warranty or maintenance contract customers who need technical assistance with a Cisco product that is under warranty or covered by a maintenance contract.
To display the TAC web site that includes links to technical support information and software upgrades and for requesting TAC support, use www.cisco.com/techsupport.
To contact by e-mail, use one of the following:
Language | E-mail Address |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
In North America, TAC can be reached at 800 553-2447 or 408 526-7209. For other telephone numbers and TAC e-mail addresses worldwide, consult the following web site: http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml.
If you are reading Cisco product documentation on the World Wide Web, you can submit technical comments electronically. Click Feedback in the toolbar and select Documentation. After you complete the form, click Submit to send it to Cisco.
You can e-mail your comments to bug-doc@cisco.com.
To submit your comments by mail, for your convenience many documents contain a response card behind the front cover. Otherwise, you can mail your comments to the following address:
Cisco Systems, Inc.
Document Resource Connection
170 West Tasman Drive
San Jose, CA 95134-9883
We appreciate and value your comments.
Posted: Mon Oct 2 16:19:37 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.
