Netscape Directory Server Installation

Please refer to the Netscape Directory Server installation guide that comes with the server. These instructions do not replace the Netscape Directory Server installation instructions. The following are notes on specific Netscape Directory Server settings that affect uOne operations.

Note You must install Netscape Communicator v4.51 before installing Netscape Directory Server.

Install Netscape Directory Server

Step 1 Obtain the proper version of Netscape Directory Server (d312eiu.exe).

Step 2 Run the Netscape Directory Server Installation file to launch the installation wizard that guides you through a series of dialog boxes. These dialogs typically have the Next and Back buttons to proceed to the next and previous dialog boxes, respectively.

Step 3 Click on the Next button of the opening dialog box.

Step 4 On the Software Installation Options dialog box choose "Netscape Directory Server" and then click the Next button.

Step 5 On the Software License Agreement dialog box, read the license agreement and determine whether or not you wish ti agree to its provisions. Click on the appropriate response. If you choose not to agree with the provisions of the license agreement, you must stop the installation process.

Step 6 On the Software Destination Location dialog box choose "<path>\SuiteSpot" (e.g., C:\Netscape\SuiteSpot) and then click the Next button. Use the Browse button to select a different directory.

Step 7 For server authentication enter the following information and then click the Next button.
Table 1:

Field Name Description Example

Username

Administrative Server User Name

admin

Password

Administrative Server Password

admin

Password confirmation

Re-enter Password to confirm

admin

Step 8 For server port selection enter the following information and click the Next button:
Table 2:

Administration server port

2500

Step 9 The wizard displays a server configuration summary. Select the Next button to proceed to the end of the installation.

Create New Netscape Directory Server Using Netscape Server Administration

Step 1 Finish the installation by choosing to open the browser to Netscape Server administration, and by deselecting the View the Read Me file checkbox.

Step 2 Click the Finish button.

Step 3 Login by entering <admin server username> and <admin server password>. Click Login to login after you enter the above information.

Step 4 If you are using Netscape Communicator for the first time (that is, you are performing a first time installation), then Netscape Communicator will prompt you to enter your name and e-mail in one dialog box, and your SMTP Server in another. Enter your name and e-mail in the first dialog box and click OK. Simply click OK for the second dialog box that asks for the SMTP server. If you are re-installing the uOne, you will not see these dialog boxes.

Step 5 Using Netscape administration server, continue to create the Directory by clicking on the hyperlink Create New Netscape Directory Server 3.1.

Step 6 On the Directory server installation web page enter the following information and click the OK button:

Table 3:

Field Name Description Example

Server Name

<hostname>.<domain>

cert-uOne1.cisco.com

Server Port

TCP/IP port number used for non-SSL communications.

389 for Netscape Messaging Server

389

Server Identifier

<hostname>

cert-uOne1

Configure Directory for SuiteSpot

Check SuiteSpot

SuiteSpot

SuiteSpot Administrator's ID

Define the Suite Spot administrator's ID

admin

Password

Choose a password

admin

Password Confirmation

Confirm the password

admin

Directory suffix

o=Organization

Unrestricted User

Define the rootdn. This specifies the distinguished name of an entry that is not subject to access control or administrative limit restrictions for operations on the database.

cn=Directory Manager, o=Organization

Password

Choose the rootdn password

spmaster123

Password Confirmation

Confirm the rootdn password

spmaster123

Once you have finished, a message box appears containing confirmation that you have started a new directory server. Click the OK button. A new web page should appear saying "Success!" at the top. It will also confirm the installation by stating "Created new Directory Server on <Server Name>, listening to port 389, serving database in <database directory>."

Step 7 Click on the hyperlink Configure more about your server.

Setting Up Access Control

Step 1 Select the Access Control button at the top of the dialog box. Log in to the ACL dialog box as cn=Directory Manager, o=Organization.

Step 2 Password: <rootdn password> (e.g., spmaster123).

Step 3 Select "OK" to login.

Step 4 Create a new ACI by selecting "New ACI".

Figure 5-1:

The Access Control page

Step 5 To change "Deny" to "Allow", click on Deny, select "Allow" from pop-up box and select "Update".

Note For all other parameters use the defaults.

Figure 5-2:

The Access Control and the Allow/Deny dialogs

Step 6 Enter "o=Organization" as the Target (in the Target text box).

Step 7 Enter the password (such as spmaster123) in the Password text box.

Step 8 Select "Submit" to create the new ACI.

Table 4:

Field Names Example

Action

Allow

Target

o=Organization

Password

spmaster123

The new ACI has the following characteristics:

Once you have finished, a new message dialog box appears and says "Add Succeeded". When the Access Control Overview window appears, it should contain four items. If it doesn't, you probably forgot to click the Submit button. If this is the case, go back to step 1.

Field Name	Description	Example
Username	Administrative Server User Name	admin
Password	Administrative Server Password	admin
Password confirmation	Re-enter Password to confirm	admin

Field Names	Example
Action	Allow
Target	o=Organization
Password	spmaster123

Table of Contents