|
|
uOne runs on the MCS-7830 appliance.
The uOne 4.1E requires the following components:
The Unattended Installer CD installs the following components in the order shown below for uOne to operate properly:
Once you have installed uOne you need to perform the following:
To check and update the domain name, when needed, perform the following steps:
Step 1 Click the Start button, in the Windows task bar, to get the Start popup menu.
Step 2 Select the Settings menu in the popup menu.
Step 3 Select the Control Panel to open the Control Panel window.
Step 4 Double-click the Network icon in the Control Panel window. This action brings up the Network dialog box.
Step 5 Click the Protocols tab.
Step 6 Select the item `TCP/IP Protocol" in the Network Protocols list box.
Step 7 Click the Properties button located below the Network Protocols list box. This action brings up the Microsoft TCP/IP Protocol dialog.
Step 8 Click the DNS tab in the Microsoft TCP/IP Protocol dialog.
Step 9 The Host Name and Domain text boxes should display the hostname and domain of your machine. If not, type in the correct hostname and/or domain in the appropriate text box.
Step 10 Click the OK button to close the Microsoft TCP/IP Protocol dialog.
Step 11 Click the OK button to close the Network dialog.
Step 12 Close the Control Panel window.
Posted: Tue Jun 20 13:16:16 PDT 2000
Copyright 1989 - 2000©Cisco Systems Inc.