Partition

Partitions divide the route plan into logical subsets. These subsets include organization, location, and type of call.

Use the following procedures to add, update, copy, or delete a partition:

Adding a Partition

The following procedure describes how to add a partition.

Procedure

Step 1 Open Cisco CallManager Administration.

Step 2 Select Route Plan > Partition in the menu bar.

Step 3 Enter a name in the Partition Name field. The name can consist of up to 50 alphanumeric characters, and can contain any combination of spaces, periods (.), hyphens (-), and underscore characters (_). Each partition name must be unique to the route plan.

TimeSaver Use concise and descriptive names for your partitions. The CompanynameLocationCalltype format usually provides a sufficient level of detail and is short enough to enable you to quickly and easily identify a partition. For example, CiscoDallasMetroPT identifies a partition for toll free inter-LATA (Local Access and Transport Area) calls from the Cisco office in Dallas.

Step 4 Enter a description in the Description field. The description can consist of up to 50 alphanumeric characters, and can contain any combination of spaces, periods (.), hyphens (-), and underscore characters (_). If you do not enter a description, the partition name is automatically entered in this field.

Step 5 Click Insert to add the new partition. The new partition name is added to the partition list on the left side of the page, and the message "Status: Insert completed" is displayed.

Step 6 To add more partitions, click New and repeat Steps 3 through 5.

Related Procedures