Table of Contents
index
- 10/100BaseT Ethernet port 1-5
- analog ports 1-6
- analog voice network module 2-2
- application command 3-4
- backup Cisco CallManager 3-4
- call agent 1-5, 3-4
- manual redirection 3-6
- redundant 1-7
- ccm-manager command 3-5
- channel associated signaling, see T1-CAS
- channel bank 1-8
- chassis, rear view 2-2
- Cisco CallManager 1-5, 3-4
- configuring 3-10
- Cisco IOS
- command modes 2-9
- enable mode 2-11
- getting help 2-8
- saving configuration changes 2-11
- undo command 2-11
- CLI, see command line interface
- command line interface
- command modes, Cisco IOS 2-9
- commands
- application 3-4
- ccm-manager 3-5
- copy running-config 2-11
- copy-running-config 3-3
- dial-peer 3-4
- exec-timeout 2-13
- help 2-8
- MGCP 3-4
- show mgcp 3-7
- show startup-config 3-3
- switchback 3-5
- switchover 3-6
- undo 2-11
- commands show running-config 3-3
- configuration
- disabling timeout 2-13
- saving changes 2-7, 2-11, 2-15
- configuring
- Cisco CallManager 3-10
- DS-0 hunt groups 3-12
- DTMF relay
- Fast Ethernet 2-6, 2-14
- H.323 endpoint 3-12
- host name 2-5, 2-11
- IP address 2-14
- MGCP host name 3-7
- passwords 2-5
- subnet mask 2-14
- T1-CAS ports 3-9
- timeslots for a DS-0 group 3-11
- voice interfaces 3-1
- Voice over IP 3-1 to 3-17
- voice ports for H.323 3-9
- voice ports with MGCP 3-3
- wildcard destination patterns 3-13
- copy-running-config command 2-11, 3-3
- dial-peer command 3-4
- DID, see Direct Inward Dialing
- digital ports 1-6
- digital voice network modules 2-2
- Direct Inward Dialing 1-9
- DS-0
- configuring hunt groups 3-12
- configuring timeslots 3-11
- group 1-8
- hunt groups 1-8
- DTMF relay, configuring
- dual-tone multi-frequency relay, see DTMF relay
- E&M
- emulation
- emulation, sample configuration 3-16
- emulation options 3-11
- ports 1-6
- Ear and Mouth, see E&M
- enable mode 2-11
- enable password 2-5
- EXEC prompt 2-7
- Fast Ethernet
- configuring interface 2-6, 2-14
- Foreign Exchange Office, see FXO
- Foreign Exchange Station, see FXS
- FXO
- configuring with MGCP 3-3
- emulation, sample configuration 3-15
- emulation example 1-8
- emulation options 3-11
- FXS
- configuring with MGCP 3-3
- emulation, sample configuration 3-14
- emulation example 1-10
- emulation options 3-11
- gateway, provisioning 3-10
- generic MGCP support 3-4
- global configuration command mode 2-9
- H.225 1-4
- H.245 1-4
- H.323 1-3
- configuring endpoint 3-12
- configuring IP address 3-13
- configuring voice ports 3-9
- help command 2-8
- host name 2-5
- configuring 2-11
- show config command 2-13
- verifying 2-13
- hunt groups, configuring 3-12
- initial configuration dialog 2-3
- interface configuration command mode 2-10
- interface numbering 2-1
- IP address, configuring 2-14
- IP adress
- configuring for H.323 endpoints 3-13
- manual redirection of call agent 3-6
- media gateway control protocol, see MGCP
- MGCP
- call agent 1-5
- command settings 3-8
- configuring voice ports 3-3
- with Cisco CallManager 3-4
- NVRAM 2-15
- password
- configuring 2-11
- enable 2-5
- secret 2-5
- show config command 2-13
- verifying 2-13
- virtual terminal 2-5
- PBX, connecting to 1-6
- port numbering 2-1
- powering on the gateway 2-3
- primary Cisco CallManager 3-4
- privileged EXEC command mode 2-9
- provisioning the gateway 3-10
- Public Switched Telephone Network (PSTN) 1-1
- redundant call agent feature 1-7
- saving configuration changes 2-7, 2-11, 2-15
- secret password 2-5
- setup script, using 2-3
- show mgcp command 3-7
- show running-config command 3-3
- show startup-config command 3-3
- slot numbering 2-1
- subnet mask, configuring 2-14
- switchback 1-8
- switchback command 3-5
- switchback options 3-6
- switchover 3-5
- switchover command 3-6
- T1 1-8
- channel bank, connecting to 1-8
- ports 1-6
- T1-CAS
- configuring ports 3-9
- illustration 1-10
- T1 channel bank 3-10
- time-division multiplexing (TDM) 1-8
- timeout, disabling 2-13
- timeslots, configuring 3-11
- undo command 2-11
- user EXEC command mode 2-9
- verifying
- host name 2-13
- password 2-13
- VIC, see voice interface card
- viewing current configuration 3-7
- virtual terminal password 2-5
- voice interface card
- voice interfaces
- configuring 3-1
- voice network module 2-2
- Voice over IP 1-1 to 1-3
- configuring 3-1 to 3-17
- VoIP, see Voice over IP
- wildcard destination patterns, configuring 3-13







Posted: Mon Jun 12 12:58:08 PDT 2000
Copyright 1989 - 2000©Cisco Systems Inc.