T01GDnnn - GateD Messages

This chapter describes messages issued by the GateD task group. These messages include T01GD001 through T01GD999.

T01GDnnn

T01GD001I

Gated subtask attached successfully

Explanation    The attempt to attach the GateD subtask was successful.

T01GD002E

Gated subtask attach failed, Rc=ret_code

Explanation    This error is generally encountered because the GateD module was not found or there was insufficient memory to complete the task.

T01GD003E

Gated subtask ended; restarting in 30 seconds

Explanation    The GateD subtask ended prematurely.

T01GD005I

A GateD cmd_name command has been successfully processed.

Explanation    A GateD operator command cmd_name has been successfully processed by the operator interface, and the request has been posted to the GateD subtask.

T01GD006E

A GateD cmd_name is received but the GateD subtask     is not running | is already running

Explanation    Either a GATED START command was issued when the GateD subtask was already running, or a GATED STOP or other command was issued when the GateD subtask was not running.

Recommended Action    Stop or start the GateD subtask as appropriate.

T01GD007E

The GateD ISRB could not be scheduled. Request failed

Explanation    A GATED START command was received, but the GateD subtask ISRB cold not be scheduled.

Recommended Action    This can be caused by a storage shortage condition. If no storage shortage exists, retry the request. If it still fails, contact Customer Support.

T01GD008I

GateD subtask ended

Explanation    The GateD subtask has ended, either in response to an operator request, or because the TCP task group is shutting down.