Index: Cisco IOS Debug Command Reference, Release 12.1
Symbols A B C D E F G H I K L M N O P Q R S T U V X Z
Symbols
- ? command xii, xvii
A
- AAA
- debug aaa accounting command 14, 547
- debug aaa authentication command 15, 547
- debug aaa authorization command 16
- debug kerberos command 428
- debug radius command 546
- debug tacacs command 624
- abbreviating commands
- context-sensitive help xi, xii, xvii
- access-list command 458
- access lists
- debug list command 457
- filtering
- DECnet 200
- filtering debug output 458
- access server
- debug modem command 479
- Address Resolution Protocol
- See ARP
- adjacencies
- DECnet 199
- establishment 669
- adjacency
- problems
- IS-IS 423
- Advanced Peer-to-Peer Networking
- See APPN
- apple event-logging command 30
- AppleTalk
- apple event-logging command 30
- ARP probes 25
- cable range configuration mismatch 34
- compatibility conflict 33
- debug apple arp command 25
- debug apple domain command 26
- debug apple eigrp-all command 27
- debug apple errors command 28
- debug apple events command 30
- debug apple nbp command 35
- debug apple packet command 38
- debug apple remap command 40
- debug apple routing command 41
- debug apple zip command 43
- debug smrp all command 582
- debug smrp group command 583
- debug smrp mcache command 585
- debug smrp neighbor command 587
- debug smrp port command 588
- debug smrp route command 589
- debug smrp transaction command 591
- discovery mode state changes
- tracking 31
- encapsulation problems 28
- extended/nonextended networks 33
- flapping routes 30
- GetNetInfo requests 32, 39
- MAC address 25
- multicast fast-switching cache 582, 585
- NBP
- lookup request 35
- name invalid 29
- routines, displaying 35
- neighbor reachability problems 30
- network address probe 32
- network errors, displaying 28
- network number range message 32
- packets, displaying 38
- router startup probe message 31
- RTMP
- errors 29
- routines
- displaying 41
- update 43
- seed/nonseed routers 33
- slow switching
- monitoring 38
- source address, displaying 39
- special events 30
- ZIP 43
- zone list check 32
- zone list incompatibility 28
- AppleTalk Remote Access Protocol
- See ARAP
- APPN
- component activity 46
- debug appn all command 44
- debug appn cs command 46
- debug appn ds command 48
- debug appn ms command 52
- debug appn nof command 53
- debug appn pc command 55
- debug appn ps command 57
- debug appn scm command 59
- debug appn ss command 60
- debug appn trs command 62
- directory services 48
- HPR
- debug appn hpr command 50
- management services 52
- node operator facility 53
- path control 55
- presentation services 57
- session connector manager 59
- session services events 60
- topology and routing services 62
- ARAP
- debug arap command 64
- debug callback used with debug arap 129
- events
- displaying 64
- ARP
- MAC addresses
- displaying 66
- request type 717
- transactions
- displaying 66
- AS5200
- debug modem csm command 480
- debug modem oob command 486
- debug modem trace command 487
- Asynchronous Transfer Mode
- See ATM
- ATM
- completion codes 73
- debug atm errors command 71
- debug atm events command 72
- debug atm packet command 76
- packet length 77
- transmission rates 73
- virtual circuit indicator 77
- ATM VC bundles
- bundle events
- displaying 69, 70
- errors
- displaying 69, 70
- authentication, authorization, and accounting
- See AAA
B
- basic security options 375
- bearer capability values 843
- Binary Synchronous Communication
- See Bisync
- Bisync
- bsc protocol-group command 88, 89
- debug bsc events command 88
- displaying events 88
- displaying packets 89
- BPDUs
- investigating 611
- BRI
- debug bri command 86
- bridging problems
- source-route bridging 606, 607
- spanning-tree topology 611
- BSTUN
- debug bstun event command 90
- debug bstun packet command 92
- buffers
- internal 5
C
- call
- ISDN
- events, setup 408
- events, teardown 409
- information 413
- setup 419
- teardown 419
- caller ID callback
- dialer profiles, successful 412
- dialer profiles, sucessful 411
- cause codes
- ISDN 836 to 842
- X.25 831, 832
- cautions
- usage in text xi
- CCO
- accessing xii
- definition xii
- CDP
- debug cdp command 143
- debug cdp ip command 144
- Channel Interface Processor
- See CIP
- channel service unit
- See CSU/DSU
- CIP
- debug channel love command 148
- debug channel packets command 149
- packet display 149
- CIR
- investigating 246
- Cisco Connection Online
- See CCO
- Cisco Discovery Protocol
- See CDP
- Cisco IOS
- saving configuration changes xx
- Cisco Link Services
- See CLS
- clear x25 vc command 834
- CLS
- debug cls message 158
- debug cls vdlc 159
- Combinet Proprietary Protocol
- See CPP
- command modes
- summary (table) xvi
- Committed Information Rate
- See CIR
- compatibility conflict
- AppleTalk network 33
- completion codes
- ATM 74
- conditionally triggered debugging
- conditional 8
- description 7
- protocol specific 8
- configuration
- display 3
- configuration, saving xx
- configure terminal command
- message logging 3
- console line
- on limiting output 6
- versus terminal lines 5
- console messages 4
- control interface 796
- coup packet 616
- CPP
- debug cpp event command 171
- debug cpp negotiation command 172
- debug cpp packet command 174
- cross-connect 678, 682
- CSU/DSU
- debug service-module command 579
- CUGs
- debug x25 events command 818
D
- daemon setup
- syslog server 6
- data-link layer access limits
- ISDN 413
- data service unit
- See CSU/DSU
- DCD
- monitoring 576
- DDR
- debug dialer events command 205
- received packets
- analyzing 205, 206
- serial interface messages 206
- dead interval
- OSPF 346
- debaug tag-switching tdp advertisements command 637
- debug 233
- debug ? command 2
- debug aaa accounting command 14
- debug aaa authentication command 15
- debug aaa authorization command 16
- debug aaa command 7
- debug all command 2
- debug alps ascu command 19
- debug alps circuit event command 21
- debug alps peer command 22
- debug alps peer event command 23
- debug alps snmp 24
- debug apple arp command 25
- debug apple domain command 26
- debug apple eigrp-all command 27
- debug apple errors command 28
- debug apple events command 30, 33
- debug apple nbp command 35
- debug apple packet command 38
- debug apple remap command 40
- debug apple routing command 41
- debug apple zip command 43
- debug appn all command 44
- debug appn cs command 46
- debug appn ds command 48
- debug appn hpr command 50
- debug appn ms command 52
- debug appn nof command 53
- debug appn pc command 55
- debug appn ps command 57
- debug appn scm command 59
- debug appn ss command 60
- debug appn trs command 62
- debug arap command 64
- debug arp command 66
- debug asp packet command 68
- debug atm bundle errors command 69
- debug atm bundle events command 70
- debug atm errors command 71
- debug atm events command 72
- debug atm oam command 75
- debug atm packet command 76
- debug atm pvcd command 78
- debug backhaul-session-manager session command 81
- debug backhaul-session-manager set command 79
- debug bert command 85
- debug bri command 86
- debug bsc events command 88
- debug bsc packet command 89
- debug bstun events command 90
- debug bstun packet command 92
- debug cable env command 93
- debug cable err command 94
- debug cable freqhop command 95
- debug cable hw-spectrum command 96
- debug cable keyman command 98
- debug cable mac command 99
- debug cable-modem bridge command 106
- debug cable-modem error command 107
- debug cable-modem interrupts command 108
- debug cable-modem mac command 104, 109
- debug cable-modem map command 115
- debug cable phy command 116
- debug cable privacy command 117
- debug cable qos command 118
- debug cable range command 119
- debug cable reset command 121, 122
- debug cable specmgmt command 122
- debug cable startalloc command 123
- debug cable telco-return msg command 692
- debug cable ucc command 125
- debug cable ucd command 126
- debug callback command 129
- debug cch323 h245 command 134
- debug cdapi command 141
- debug cdp command 143
- debug cdp ip command 144
- debug channel events command 146
- debug channel love command 148
- debug channel packets command 149
- debug clns esis events command 150
- debug clns esis packets command 151
- debug clns events command 153
- debug clns igrp packets command 154
- debug clns packet command 156
- debug clns routing command 157
- debug cls message command 158
- debug cls vdlc command 159
- debug cms voice command 183
- debug commands
- caution for use 1
- disabling all 2
- documentation method 13
- enabling all 2
- entering 1
- options
- displaying 1
- output
- generating 2
- redirecting 3
- sample 2
- using the no form 1
- debug compress command 161
- debug condition command 8, 163
- debug condition interface command 165
- debug confmodem command 167
- debug cpp event command 171
- debug cpp negotiation command 172
- debug cpp packet command 174
- debug crypto ipsec command 175
- debug crypto isakmp command 178
- debug crypto key-exchange command 180
- debug crypto sesmgmt command 181
- debug dbconn all command 190
- debug dbconn drda command 194
- debug dbconn event command 195
- debug dbconn tcp command 197
- debug decnet adj command 199
- debug decnet connects command 200
- debug decnet events command 202
- debug decnet packet command 203
- debug decnet routing command 204
- debug dialer command 7
- debug dialer events command 205
- debug dlsw command 207
- debug drip packet command 219
- debug dspu activation command 220
- debug dspu packet command 222
- debug dspu state command 223
- debug dspu trace command 225
- debug dss ipx event command 227
- debug eigrp fsm command 228
- debug eigrp packet command 230
- debug fddi smt-packets command 232
- debug frame-relay callcontrol command 235
- debug frame-relay command 233
- debug frame-relay events command 237
- debug frame-relay foresight command 240
- debug frame-relay fragment command 238
- debug frame-relay informationelements command 241
- debug frame-relay lapf command 243
- debug frame-relay lmi command 244
- debug frame-relay networklayerinterface command 247
- debug frame-relay packet command 250
- debug frame-relay ppp command 252
- debug fras error command 254
- debug fras-host activation command 255
- debug fras-host error command 256
- debug fras-host packet command 257
- debug fras-host snmp command 259
- debug fras message command 260
- debug fras state command 261
- debug ftpserver command 262
- debug h225 events command 280
- debug h245 asn1 command 282
- debug h245 events command 283
- debug h255 asn1 command 269
- debug ima command 284 to 285
- debug ip auth-proxy command 286
- debug ip bgp command 288
- debug ip casa affinities 289
- debug ip casa packets 291
- debug ip casa wildcards 293
- debug ip cef command 295
- debug ip dhcp command 296
- debug ip drp command 297
- debug ip dvmrp command 298
- debug ip eigrp command 301
- debug ip http authentication command 302
- debug ip http ezsetup command 303
- debug ip http ssi command 305
- debug ip http token command 306
- debug ip http transaction command 308
- debug ip http url command 310
- debug ip icmp command 311
- debug ip igmp command 316, 338, 354
- debug ip igrp events command 317
- debug ip igrp transactions command 319, 328, 356
- debug ip inspect command 321
- debug ip mbgp dampening command 325
- debug ip mbgp updates command 326
- debug ip mcache command 327
- debug ip mds ipc command 329
- debug ip mds mevent command 330
- debug ip mds mpacket command 331
- debug ip mds process command 332
- debug ip mobile host command 334
- debug ip mpacket command 335
- debug ip mrm command 337
- debug ip mrouting command 316, 338, 354
- debug ip msdp command 340
- debug ip msdp resets command 342
- debug ip nat command 343
- debug ip ospf events command 346
- debug ip ospf packet command 347
- debug ip packet command 335, 349
- debug ip pgm router command 352
- debug ip pim atm command 357
- debug ip pim auto-rp command 358
- debug ip pim command 316, 338, 354
- debug ip policy command 360
- debug ip rip command 362
- debug ip routing command 363
- debug ip rsvp command 365
- debug ip rsvp detail command 367
- debug ip rsvp detail sbm command 369
- debug ip rtp header-compression command 371
- debug ip rtp packets command 372
- debug ip sd command 373
- debug ip security command 375
- debug ip socket command 377
- debug ip tcp driver command 380, 382
- debug ip tcp driver-pak command 380, 382
- debug ip tcp intercept command 384
- debug ip tcp transactions command 386
- debug ip trigger-authentication command 388
- debug ip wccp events command 390
- debug ip wccp packets command 391
- debug ipx ipxwan command 392
- debug ipx nasi command 394
- debug ipx packet command 396
- debug ipx routing command 398
- debug ipx sap command 400
- debug ipx spoof command 404
- debug ipx spx command 406
- debug isdn command 7
- debug isdn event command 408
- debug isdn q921 command 413
- debug isdn q931 command 419
- debug isis adj packets command 423
- debug isis spf statistics command 424
- debug isis update-packets command 426
- debug kerberos command 428
- debug lane client command 430
- debug lane config command 439
- debug lane finder command 441
- debug lane server command 442
- debug lane signaling command 445
- debug lapb command 447
- debug lapb-ta command 451
- debug lat packet command 452
- debug lex rcmd command 454
- debug list command 457
- debug llc2 dynwind command 460
- debug llc2 errors command 461
- debug llc2 packet command 462
- debug llc2 state command 464
- debug lnm events command 465
- debug lnm llc command 467
- debug lnm mac command 470
- debug local-ack state command 472
- debug mdss command 474
- debug mls rp command 476
- debug mls rp ip multicast 477
- debug modem command 7, 479
- debug modem csm command 480
- debug modem oob command 486
- debug modem trace command 487
- debug mpoa client command 489
- debug mpoa server command 490
- debug ncia circuit command 491
- debug ncia client command 496
- debug ncia server command 498
- debug netbios error command 500
- debug netbios-name-cache command 501
- debug netbios packet command 504
- debug nhrp command 505
- debug nhrp extension command 507
- debug nhrp options command 508
- debug nhrp packet command 509
- debug nhrp rate command 510
- debug packet command 511
- debug pots command 514
- debug ppp bap command 528
- debug ppp command 7, 516
- debug ppp multilink command 535
- debug ppp multilink events command 536
- debug ppp multilink negotiation command 537
- debug proxy h323 statistics command 539
- debug qllc error command 540
- debug qllc event command 541
- debug qllc packet command 542
- debug qllc state command 543
- debug qllc timer command 544
- debug qllc x25 command 545
- debug radius command 546
- debug ras command 548
- debug rif command 555
- debug route-map ipc command 558
- debug rtr error command 560
- debug rtr trace command 562
- debug sdlc command 564
- debug sdlc local-ack command 568
- debug sdlc packet command 570
- debug sdllc command 571
- debug serial interface command 573
- debug serial packet command 578
- debug service-module command 579
- debug smrp all command 582
- debug smrp group command 583
- debug smrp mcache command 585
- debug smrp neighbor command 587
- debug smrp port command 588
- debug smrp route command 589
- debug smrp transaction command 591
- debug snmp packet command 596
- debug snmp requests command 598
- debug sntp adjust command 599
- debug sntp packets command 600
- debug sntp select command 602
- debug source-bridge command 603, 607
- debug source error command 605
- debug source event command 607
- debug span command 611
- debug sse command 614
- debug standby command 615
- debug status
- displaying 2
- debug stun packet command 617
- debug sw56 command 619, 628
- debug syscon perfdata command 620
- debug syscon sdp command 621
- debug syslog-server command 622
- debug tacacs command 624
- debug tacacs events command 626
- debug tag-switching adjacency command 629, 791
- debug tag-switching atm-cos command 630
- debug tag-switching atm-tdp api command 632
- debug tag-switching atm-tdp routes command 633
- debug tag-switching atm-tdp states command 635
- debug tag-switching packets command 636
- debug tag-switching tdp bindings command 638
- debug tag-switching tdp directed-neighbors command 640
- debug tag-switching tdp peer state-machine command 641
- debug tag-switching tdp pies received command 643
- debug tag-switching tdp pies sent command 644
- debug tag-switching tdp session io command 646
- debug tag-switching tdp session state-machine command 648
- debug tag-switching tdp transport connections command 650
- debug tag-switching tdp transport events command 652
- debug tag-switching tdp transport timers command 654
- debug tag-switching tfib cef command 656
- debug tag-switching tfib enc command 659
- debug tag-switching tfib state command 661
- debug tag-switching tfib struct command 663
- debug tag-switching tfib tsp command 665
- debug tag-switching traffic-engineering command 667
- debug tag-switching traffic-engineering interfaces command 668
- debug tag-switching traffic-engineering metrics command 669
- debug tag-switching traffic-engineering routing-table command 671
- debug tag-switching tsp-tunnels events command 672
- debug tag-switching tsp-tunnels signalling command 673
- debug tag-switching tsp-tunnels tagging command 676
- debug tarp events command 685
- debug tarp packets command 687
- debug tdm command 689
- debug tftp command 693
- debug token ring command 694
- debug tsp command 696
- debug txconn all command 697
- debug txconn appc command 698
- debug txconn config command 700
- debug txconn data command 701
- debug txconn event command 703
- debug txconn tcp command 705
- debug txconn timer command 707
- debug udptn command 708
- debug v120 event command 709
- debug v120 packet command 710
- debug vg-anylan command 712
- debug video vicm command 714 to 715
- debug vines arp command 716
- debug vines echo command 718
- debug vines ipc command 719
- debug vines netrpc command 721
- debug vines packet command 722
- debug vines routing command 723, 728
- debug vines service command 725
- debug vines state command 727
- debug vines table command 728
- debug vis events command 793
- debug vlan packet command 729
- debug voice all command 730
- debug voice cp command 731
- debug voice eecm command 732
- debug voice protocol command 733
- debug voice signaling command 735
- debug voice tdsm command 737
- debug voice vofr command 739
- debug voip aaa command 741
- debug voip ccapi command 742
- debug voip ccapi error command 744
- debug voip ccapi inout command 745
- debug voip ivr command 748
- debug voip rawmsg command 751
- debug voip settlement command 752
- debug voip settlement enter command 753
- debug voip settlement error command 754
- debug voip settlement exit command 759
- debug voip settlement misc command 760
- debug voip settlement network command 761
- debug voip settlement security command 764
- debug voip settlement transaction command 765
- debug vpdn command 766
- debug vpdn event command 777
- debug vpdn packet command 779
- debug vpm all command 782
- debug vpm dsp command 783
- debug vpm port command 784
- debug vpm signal command 786
- debug vpm spi command 787
- debug vsi api command 789
- debug vsi errors command 791
- debug vsi packets command 795
- debug vsi param-groups command 797
- debug vtemplate command 799
- debug vtsp all command 802
- debug vtsp dsp command 803
- debug vtsp port command 804
- debug vtsp session command 806
- debug vtsp vofr subrame command 810
- debug x25 command 540, 802, 812
- debug x28 command 820
- debug xcctsp all command 821
- debug xcctsp error command 822
- debug xcctsp session command 823
- debug xns packet command 824
- debug xns routing command 825
- DECnet
- access list filtering 200
- adjacency entry in routing table 199
- adjacency state change 199
- BDPU packet 612
- debug decnet adj command 199
- debug decnet connects command 200
- debug decnet events command 202
- debug decnet packet command 203
- debug decnet routing command 204
- debug lat packet command 452
- hello packet 612
- LAT events
- logging 452
- max area parameter 202
- max node parameter 202
- password and account information 200
- Phase IV/Phase V converted packet 203
- routing events
- logging 204
- routing updates
- logging 203
- spanning-tree problems 612
- unscheduled update event 204
- decnet access-group command 200
- default form of a command
- using xix
- delay measurement in NetWare 399
- Dijkstra algorithm 424
- Director Response Protocol
- See DRP 297
- disable debug commands 1
- disable debugging activity 2
- discovery mode state changes
- tracking 31
- Distance Vector Multiprotocol Routing Protocol
- See IP
- DVMRP
- DLCI
- counts 250, 513
- investigating 246, 251
- DLSw
- debug dlsw command 207
- downstream physical unit
- See DSPU
- dsm
- debug service module 579
- DSPU
- debug dspu activation command 220
- debug dspu packet command 222
- debug dspu state command 223
- debug dspu trace command 225
- DVMRP 298, 299, 336
- dynamic addressing
- Frame Relay 237
E
- EIGRP
- analyzing local and remote host traffic 230
- debug eigrp fsm command 228
- debug eigrp packet command 230
- debug ip eigrp command 301
- enable all debugging 2
- encapsulation
- solving problems in AppleTalk 28
- style
- general packet debugging 511
- encryption
- debug crypto key-exchange command 180
- debug crypto sesmgmt command 181
- Enhanced IGRP
- See EIGRP
- error messages
- ICMP 350
- ES hello packets
- displaying 150
- ES-IS
- debug clns esis events command 150
- debug clns esis packets command 151
- hello packet, displaying 150
- explorer frame packet 604
- explorer frame response 572
- explorer packet 609
F
- fast switching
- cache entry 157
- IPX packet information 396
- RIF cache information
- displaying 555
- SMRP mcache 582, 585
- source-route bridging information 607
- FDDI
- debug fddi smt-packet command 232
- Fiber Distributed Data Interface
- See FDDI
- filtering debug output by access list 458
- flapping routes
- identifying 30
- frame events
- investigating 448
- protocol state in SDLC 565
- Frame Relay
- analyzing end-to-end connection problems 237
- ARP replies, displaying 237
- debug cls message command 158
- debug dialer events command 205
- debug frame-relay callcontrol command 235
- debug frame-relay command 233
- debug frame-relay events command 237
- debug frame-relay informationelements command 241
- debug frame-relay lapf command 243
- debug frame-relay lmi command 244
- debug frame-relay networklayerinterface command 247
- debug frame-relay packets command 250
- debug fras error command 254
- debug fras message command 260
- debug fras state command 261
- DLCI counts 250, 513
- dynamic addressing 237
- interface packets
- displaying 250
- LMI 244
- multicast channel 237
- packet type codes 233
- PPP
- interfaces, debugging 252
- received packets
- analyzing 233
- sent packets
- analyzing 233
- sent packets, analyzing 250, 252
- unknown packet types 573
- Frame Relay Access Support
- See FRAS
- frame type names 449
- FRAS
- Cisco link services 158
- data-link control 261
- debug cls message 158
- debug fras error 254
- debug fras message 260
- debug fras state 261
- FST encapsulation 610
G
- GetNetInfo requests
- tracking 32, 39
- global configuration mode
- summary xvi
H
- H.245
- events 283
- message content 282
- halt all debug activity 2
- HDLC
- debug serial interface command 573
- hello interval
- OSPF 346
- hello packet
- DECnet
- displaying 612
- ES-IS
- displaying 150
- IS-IS
- displaying 423
- ISO IGRP
- displaying 154
- help command xi, xii, xvii
- High-Level Data Link Control
- See HDLC 573
- High-Speed Serial Interface
- See HSSI 573
- host address
- setting syslog server 6
- host command 720, 721
- Hot Standby Protocol
- See HSP 615
- HSSI
- debug serial interface command 575
I
- ICMP
- code types 313
- debug ip icmp command 311
- end-to-end connection
- analyzing 311
- error messages 350
- mask request message 314
- packet types 312
- security error messages in IPSO 350
- transactions
- logging 311
- IEEE spanning-tree problems 611
- IGMP 336
- IGRP
- debug ip igrp events command 317
- routing messages
- displaying 317
- routing transactions
- displaying 319
- Information Element Identifier
- ISDN 409, 421
- interface configuration mode
- summary xvi
- interface packets
- displaying Frame Relay 250
- internal buffer, logging messages to 5
- Internet Group Management Protocol
- See IGMP
- IP
- analyzing local and remote host traffic 349
- analyzing TCP/IP performance problems 386
- basic security options 375
- debug ip drp command 297
- debug ip dvmrp command 298, 328, 336, 339
- debug ip eigrp command 301
- debug ip http ezsetup command 303
- debug ip http token command 306
- debug ip http transaction command 308
- debug ip http url command 310
- debug ip icmp command 311
- debug ip igmp command 316
- debug ip igrp events command 317
- debug ip mcache command 327
- debug ip mds ipc command 329
- debug ip mds mevent command 330
- debug ip mds packet command 331
- debug ip mds process command 332
- debug ip mpacket command 335
- debug ip mrouting command 338
- debug ip nat command 343
- debug ip ospf events command 346
- debug ip ospf packet command 347
- debug ip packet command 349
- debug ip pim auto-rp command 358
- debug ip pim command 354
- debug ip rip command 362
- debug ip routing command 363
- debug ip sd command 373
- debug ip security command 375
- debug ip socket command 377
- debug ip tcp driver command 380
- debug ip tcp driver-pak command 382
- debug ip tcp transaction command 386
- debug nhrp command 505
- debug nhrp options command 508
- debug nhrp rate command 510
- general debugging information
- displaying 336, 339, 349
- ICMP transactions
- logging 311
- IGRP routing messages
- displaying 319
- IGRP routing transactions
- displaying 317
- IPSO security transactions
- displaying 349
- network not responding 505
- OSPF-related events
- generating information 346
- packet information 386
- RIP updates 362
- security classification 375
- security failure message 351
- subnet mask problems 346
- TCP transactions
- displaying 386
- IPSec
- debug crypto ipsec command 175
- IP Security Option
- See IPSO
- IPSO
- analyzing datagram failures 230, 349
- security 336, 339, 349, 350
- security actions (table) 350
- unclassified genser 350
- IPX
- debug ipx ipxwan command 392
- debug ipx nasi command 394
- debug ipx packet command 396
- debug ipx routing command 398
- debug ipx sap command 400
- debug ipx spoof command 404
- debug ipx spx command 406
- debug nhrp command 505
- debug nhrp options command 508
- debug nhrp rate command 510
- delay measurement in NetWare 399
- network not responding 505
- non-fast switched packets
- displaying 396
- packet information 396
- routing packet information 398
- routing update timing 398
- SAP 400, 401
- server service types 402
- service detail message 400
- socket number 401, 403
- startup negotiations 392
- ticks 399
- ipx route-cache command 396
- ISDN
- Action indicator 416
- assignment source point 414
- Basic Rate problems 575
- bearer capability values 843
- bearer service 409
- caller ID callback
- legacy DDR 411
- call information
- displaying 413
- call origin 410
- call reference number 421
- call setup
- displaying 419
- call teardown
- displaying 419
- cause codes 836 to 842
- Channel Identifier 409, 421
- data-link layer display limits 413
- debug isdn q921 command 413
- debug isdn q931 command 419
- debug serial interface command 575
- debug v120 event command 709
- debug v120 packet command 710
- display format differences 408
- Identity Check Request message type 417
- Identity Check Response message type 417
- Identity Remove message type 416
- Identity Request message type 416
- information command 418
- Information Element Identifier 409, 421
- Layer 2 access procedures
- displaying 413
- modulo 128 multiple frame acknowledged operation 417
- protocol discriminator 420
- Receive Ready response 418
- reference number 416
- send sequence number 418
- service access point 417
- service profile identifier 418
- show dialer command 408
- switch types 835
- teardown
- call disconnected by local ISDN interface 409
- call hung up by remote side ISDN interface 410
- outgoing call using dialer subaddress 410
- TEI value 417
- unsuccessful 411
- ISDN BRI
- See BRI
- ISDN LAPB-TA debug commands
- LAPB 451
- IS hello packets
- displaying 150, 151
- IS hello packets, displaying 151
- IS-IS
- adjacency problems 423
- debug isis spf statistics command 424
- hello packet 423
- route statistical information, displaying 424
- ISO CLNS
- adjacency-related activities
- displaying 423
- debug clns esis events command 150
- debug clns esis packets command 151
- debug clns events command 153
- debug clns packet command 156
- debug clns routing command 157
- debug isis adj packets command 423
- debug isis update packets command 426
- debug tarp events command 685
- debug tarp packets command 687
- Dijkstra algorithm 424
- ES hello packets
- displaying 150
- ES-IS events
- displaying 150
- fast-switching cache entry 157
- hold time
- displaying 150
- IS hello packets
- displaying 150, 151
- IS-IS hello packet 423
- link state packets 426
- MAC address
- displaying 153
- NSAP 426
- NSAP address 153, 156
- PDUS and link state packets
- displaying 426
- routing cache updates 157
- routing table change indicator 157
- sequence number packets 426
- shortest path first algorithm 424
- SNPA display 156
- ISO IGRP
- debug clns igrp packets command 154
- hello packet display 154
- Level 1 update display 154
- Level 2 update display 154
- metric display 155
K
- keepalive
- monitoring for BSTUN 90
- packet monitoring 574
- timing values
- serial connection 573
- Kerberos
- debug kerberos command 428
L
- LAN Extender
- See LEX
- LAN Network Manager
- See LNM
- LAPB
- events 447
- frame type names 449
- interface traffic
- displaying 447
- Level 1 update display, ISO-IGRP 154
- Level 2 update display, ISO IGRP 154
- LEX
- debug lex rcmd command 454
- LEX interface 454
- link layer encapsulation 798
- link problems
- debug lapb command 447
- link state packets
- investigating 426
- LLC
- debug lnm llc command 467
- software function level 468
- LLC2
- Token Ring problems 694
- LMI
- Frame Relay 244
- LNM
- communication
- displaying 467
- debug lnm events command 465
- debug lnm llc command 467
- debug lnm mac command 470
- Token Ring network, displaying events 465
- local acknowledgment
- monitoring frame types 568
- state conditions 472
- Local Management Interface
- See LMI
- logging buffered command 5
- logging command 3, 5
- logging console command 4
- logging monitor command 5
- logging on command 3
- logging trap command 6
- Logical Link Control
- See LLC
M
- MAC
- AppleTalk hardware address
- displaying 25
- ARP address
- displaying 66
- IP address
- displaying 66
- ISO CLNS address
- displaying 153
- NetBIOS address
- displaying 502
- spanning-tree root address 612
- TCP/IP address
- displaying 66
- Magic Number 519
- mask request message
- ICMP 314
- max area parameter exceeded 202
- max node parameter exceeded 202
- Media Access Control
- See MAC
- message logging
- choosing a destination 3
- directing to console 3
- enabling 3
- keywords and levels 4
- limiting output
- on console 4
- setting levels 4
- setting trap level 6
- to internal buffer 5
- to UNIX syslog server 5
- message logging on terminal lines 5
- messages
- ICMP 350
- metric display
- ISO IGRP 155
- metric exchange 669
- MK5025
- debug serial interface command 576
- device problems 576
- mnemonics 794
- modem information 167
- debug modem command 479
- debug modem csm command 480
- debug modem oob command 486
- debug modem trace command 487
- modes
- See command modes
- monitor
- logging messages to 5
- more system
- running-config command 3
- MPOA
- debug mpoa client command 489
- debug mpoa server command 490
- multicast channel
- Frame Relay 237
- multicast IP
- debug ip igmp command 316, 338, 354
- debug ip mcache command 327
- debug ip mpacket command 335
- debug ip mrouting command 316, 338, 354
- debug ip pim auto-rp command 358
- debug ip pim command 316, 338, 354
- debug ip sd command 373
- multilink fragments
- PPP 535
- Multiprotocol over ATM
- See MPOA
N
- name-cache proxy
- NetBIOS 503
- name caching activities
- NetBIOS 500, 501, 504
- name not in NetBIOS cache 503
- NASI
- debug ipx nasi 394
- debug ipx spx 406
- NAT 343
- native client interface architecture
- See NCIA
- NBP
- lookup request 35
- name invalid 29
- routines, displaying 35
- NCIA
- debug ncia circuit command 491
- debug ncia client command 496
- debug ncia server command 498
- neighbor 582
- neighbor operating states
- SMRP 587
- NetBIOS
- debug netbios error command 500
- debug netbios-name-cache command 501
- debug netbios packet command 504
- insufficient cache buffer space display 502
- MAC address display 502
- name cache (table) 501
- name-cache proxy nonexistent 503
- name caching activities
- displaying 501
- name not in cache 503
- netbooting problems 693
- NetRPC packet 721
- NetWare Asynchronous Services Interface
- See NASI
- network address probe 32
- network address translation
- See NAT 343
- Network Basic Input/Output System
- See NetBIOS
- network not responding
- debug nhrp command 505
- network traffic
- debug priority over 2
- generating with ping command 3
- Next Hop Resolution Protocol
- See NHRP
- NHRP
- debug nhrp command 505
- debug nhrp extension command 507
- debug nhrp options command 508
- debug nhrp packet command 509
- debug nhrp rate command 510
- no form of a command
- using xix
- notes
- usage in text xii
- NSAP
- identifier 426
- ISO CLNS display 153, 156
O
- online documentation
- See CCO
- options
- displaying 2
- options to debug command
- displaying 2
- OSPF
- debug ip ospf events command 347
- debug ip ospf packet command 347
- output from debug
- caution using 2
- generating 2
- limiting 4
- limiting on terminal lines 5
- logging to internal buffer 5
- redirect using command options 3
- setting message levels 4
- terminal lines versus console lines 5
- to a UNIX syslog server 5
- using the logging command 3
P
- packet conversion
- Phase IV/Phase V 203
- packets
- AppleTalk 38
- ARP 716
- ATM 76
- Bisync 89
- BSTUN 92
- CIP 149
- DDR 205, 206
- debug network 511
- DECnet 203, 452, 612
- DSPU 222
- EIGRP 230
- ES hello 150
- ES-IS 151
- FRame Relay 250
- Frame Relay 233, 573
- IGRP 154
- IP 349
- IP multicast 335
- IP TCP 386
- IPX 396
- IS-IS 423
- ISO CLNS 156, 426
- IXP routing 398
- keepalive monitoring 574
- NetBIOS 504
- NetRPC 721
- QLLC 542
- SDLC 570
- serial interface 578
- SRB 603, 605, 606
- STUN 617
- TARP 687
- V120 710
- VINES 722
- VLANs 729
- X.25 816
- XNS 824
- peer bridges 604
- Phase IV/Phase V converted packet 203
- PIM 354, 355, 357
- ping command
- generating network traffic 3
- Point-toPoint Protocol
- See PPP
- port operating state changes
- SMRP 588
- PPP
- debug ppp chap command 523
- debug ppp command 516
- debug ppp error command 522
- debug ppp multilink command 535
- debug ppp used with debug callback 129
- Frame Relay
- interfaces, debugging 252
- Magic Number 519
- multilink fragments and events 535
- packet exchange between ECHO and LQRs 518
- Quality Protocol option 522
- traffic
- monitoring 516
- privileged EXEC mode
- summary xvi
- prompts
- system xvi
- Protocol Independent Multicast
- See PIM
- Protocol Independent Multicast (PIM) 316
- protocol problems
- debug packet 511
- protocol state in SDLC 565
- protocols using TCP driver 380
Q
- Q.931
- events 280
- messages 269
- QLLC
- debug qllc error command 540
- debug qllc event command 541
- debug qllc packet command 542
- debug qllc state command 543
- debug qllc timer command 544
- debug qllc x25 command 545
- Qualified Logical Link Control
- See QLLC
- question command xvii
R
- RADIUS
- debug radius command 546
- RAS
- events
- displaying 548
- message contents 269
- Registration, Admission, and Status protocol
- See RAS
- Remote Authentication Dial-In User Server
- See RADIUS
- remote peer message header types 609
- Remote Source-Route Bridging
- See RSRB
- Response Time Reporter
- See RTR
- RIF
- cache entry 607
- cache problems 555
- debug source-bridge command 604
- interface not configured 556
- XID response 556
- ring exchange packet 609
- RIP
- debug ip rip command 362
- debug ip routing command 363
- packet malformed 362
- routing table updates 362
- routing transactions 362
- routing updated 363
- ROM monitor mode
- summary xvi
- router
- SDLLC support 571
- router configuration
- displaying 3
- routing activity
- SMRP 589
- routing algorithm
- Dijkstra 424
- shortest path first 424
- routing cache updates 157
- Routing Interface Protocol
- See RIP
- Routing Table Maintenance Protocol
- See RTMP
- routing table updates
- RIP 362
- routing update timing, IPX 398
- RSRB
- debug source event command 607
- explorer packet 609
- FST encapsulation 610
- message header types 609
- RIF cache entry 607
- ring exchange packet 609
- virtual ring header 610
- RTMP
- description 41
- packet
- displaying 41
- updates 43
- using debug apple routing to debug 41
- RTP update messages 723
- RTR
- debug rtr error command 560
- debug rtr trace command 562
S
- SAP 399, 400, 401
- saving configuration changes xx
- SDLC
- debug sdlc command 564
- debug sdlc local-ack command 568
- debug sdlc packet command 570
- frames
- logging 564
- frame type name 565
- local acknowledgment information
- displaying 568
- local acknowledgment state machine 569
- SDLLC
- data link layer
- displaying 571
- debug sdllc command 571
- explorer frame response 572
- security
- basic options 375
- classification 375
- debug kerberos command 428
- debug radius command 546
- debug tacacs command 624
- ICMP error messages 350
- IP failure messages 351
- IPSO error messages 350
- seed/nonseed routers 33
- sequence number packets, investigating 426
- Sequence Packet Exchange
- See SPX
- serial connection problems 573
- serial debugging, interface support 573
- serial interface
- HDLC messages 573
- HSSI messages 575
- ISDN Basic Rate messages 575
- MK5025 device messages 576
- SMDS messages 576
- serial timing problems 573
- server service types in IPX 402
- Service Advertising Protocol
- See SAP
- service detail message in IPX 400
- session directory announcements 373
- session number 796, 797
- setting message logging trap level 6
- shortest path first algorithm
- IS-IS 424
- show accounting command 14
- show debugging command 2
- show dialer command 408
- show interface serial command 573
- show logging command 5, 6
- show vlans command 729
- silicon switching engine
- See SSE
- Simple Multicast Routing Protocol
- See SMRP
- slave numbers 797
- slow switching
- monitoring AppleTalk 38
- SMDS
- debug serial interface command 576
- debug serial packet command 578
- encapsulation problems 576, 578
- SMRP
- debug smrp all command 582
- debug smrp group command 583
- debug smrp mcache command 585
- debug smrp neighbor command 587
- debug smrp port command 588
- debug smrp route command 589
- debug smrp transaction command 591
- multicast fast-switching cache 582, 585
- SNPA display
- ISO CLNS 156
- socket
- debug ip socket command 377
- socket number in IPX 401, 403
- source-bridge route-cache command 555
- spanning-tree problems 611
- SPX
- debug ipx nasi 394
- debug ipx spx 406
- SRB
- debug source-bridge command 603, 606
- debug source error command 605
- debug source event command 607
- explorer frame 604
- packet and frame information
- displaying 603, 605, 606
- peer bridges 604
- routing information field 604
- using TCP as transport 603
- SSE
- debug sse command 614
- standby ip command 616
- startup AppleTalk probe message 31
- startup negotiations
- IPX WAN 392
- state1 794
- state machine changes in TCP 387
- stub area 346
- STUN
- debug stun packet command 617
- packet link display 617
- X1 packet type 618
- X2 packet type 618
- subinterface configuration mode
- summary xvi
- subnet mask problems 346
- switch types, ISDN interface support 835
- Sychronous Data Link Control
- See SDLC
- syslog server 6
- system diagnostics
- enabling all 2
T
- Tab key
- command completion xvii
- TACACS
- accounting 14, 547
- authentication 15, 547
- authorization 16
- debug tacacs command 624
- debug tacacs events command 626
- login attempts 624
- Target Identifier Address Resolution Protocol
- See TARP
- TARP
- debug tarp events command 685
- debug tarp packets command 687
- TCNs
- monitoring 611, 612
- TCP
- analyzing performance problems 386
- debug arp command 66
- debug ip tcp driver command 380, 382
- debug ip tcp driver-pak command 380, 382
- debug ip tcp transaction command 386
- displaying transactions 379, 386
- driver activity identifier 380, 382
- driver events
- logging 380
- driver operations
- logging 382
- header compression
- investigating 513
- intercept
- debugging 384
- MAC addresses
- displaying 66
- network nodes not responding 66
- packet information 386
- port number 380
- protocols using driver 380
- state machine changes 387
- verbose debugging output 380
- TDP session
- protocol level 641, 646, 648, 650, 652, 654
- tag distribution level 641, 646, 648, 650, 652, 654
- transport 648, 650, 652, 654
- transport level 641, 646
- Terminal Access Controller Access Control System
- See TACACS
- terminal lines 5
- terminal monitor command 5
- TFTP
- copy running-config tftp command 693
- copy tftp running-config command 693
- debug tftp command 693
- three levels 654
- ticks
- NetWare delay measurement 399
- timing problems
- serial connection 573
- Token Ring
- communication
- displaying 467
- debug token ring command 694
- interface activity
- displaying 694
- management communication
- displaying 470
- network events
- displaying 465
- traffic rates
- NHRP 510
- transmission rates for ATM 73
- transparent bridging problems 611
- trap level 6
- TSP tunnels
- RSVP
- using 673
U
- unclassified genser 350
- undebug command 1
- UNIX syslog server 5, 6
- unknown protocol problems
- debug packet 511
- unscheduled update event
- displaying 204
- user EXEC mode
- summary xvi
V
- V120
- debug V120 event 709
- debug V120 packet 710
- VINES
- ARP packets
- logging 716
- ARP request type 717
- debug vines arp command 716
- debug vines echo command 718
- debug vines ipc command 719
- debug vines netrpc command 721
- debug vines packet command 722
- debug vines routing command 723, 728
- debug vines service command 725
- debug vines state command 727
- debug vines table command 728
- general information
- logging 722
- host command 720, 721
- IPC layer transactions
- logging 719
- MAC-level echo packets
- logging 718
- NetRPC layer transactions
- logging 721
- RTP update messages
- logging 723
- Service layer transactions
- logging 725
- SRTP state transactions
- logging 727
- virtual circuit
- states
- X.25 815
- virtual circuit display in ATM 77
- virtual LANs
- See VLANs
- virtual ring header
- RSRB 610
- VLANs
- debug vlan packet command 729
- Voice Call Manager
- debug voice all command 730
- debug voice cp command 731
- debug voice eecm command 732
- debug voice protocol command 733
- debug voice signaling command 735
- debug voice tdsm command 737
- VSI
- header 798
- master 798
X
- X.25
- cause codes 831, 832
- clear x25 vc command 834
- CUGs debug x25 events command 818
- debug lapb command 447
- debug x25 command 812
- diagnostic codes 832
- LAPB
- events 447
- frame type names 449
- interface traffic, displaying 447
- packet types 816
- virtual circuit states 815
- X1 packet type 618
- X2 packet type 618
- XID response 556
- XNS
- debug xns packet command 824
- debug xns routing command 825
- packet traffic
- logging 824
- routing transaction
- displaying 825
Z
- ZIP
- debug apple zip command 43
- extended reply 43
- storm 43
- zone list incompatibility 28
Copyright 1989-1999
©
Cisco Systems Inc.