|
|
This chapter explains the function and syntax of the switching commands from show mpoa client statistics through show tag-switching tdp bindings. For more information about defaults and usage guidelines, see the corresponding chapter of the Cisco IOS Switching Command Reference, Release 12.1.
To display all the statistics collected by an MPC, use the show mpoa client statistics command in EXEC mode.
show mpoa client [name mpc-name] statistics
Syntax Description
name mpc-name (Optional) Specifies the name of the MPC.
To display the default ATM addresses for the MPC, use the show mpoa default-atm-addresses command in EXEC mode.
show mpoa default-atm-addressesSyntax Description
This command has no arguments or keywords.
To display information about any specified MPS or all MPSs in the system, depending on whether the name of the required MPS is specified, use the show mpoa server command in EXEC mode.
show mpoa server [name mps-name]
Syntax Description
name mps-name (Optional) Specifies the name of the MPOA server.
To display ingress and egress cache entries associated with a server, use the show mpoa server cache command in EXEC mode.
show mpoa server [name mps-name] cache [ingress | egress] [ip-address ip-address]
Syntax Description
name mps-name (Optional) Specifies the name of a MPOA server. ingress (Optional) Displays ingress cache entries associated with a server. egress (Optional) Displays egress cache entries associated with a server. ip-address ip-address (Optional) Displays the entries that match the specified IP address.
To display all the statistics collected by an MPS, use the show mpoa server statistics command in EXEC mode.
show mpoa server [name mps-name] statistics
Syntax Description
name mps-name (Optional) Specifies the name of a MPOA server.
To display counts of the one-way route map IPC messages sent from the RP to the VIP when NetFlow policy routing is configured, use the show route-map ipc command in EXEC mode.
show route-map ipcSyntax Description
This command has no arguments or keywords.
To display the requested entries from the ATM LDP label binding database, use the show tag-switching atm-tdp bindings command in privileged EXEC mode. The ATM LDP database contains LIB entries for label VCs on TC-ATM interfaces.
show tag-switching atm-tdp bindings [network {mask | length}] [local-tag vpi vci ][remote-tag vpi vci] [neighbor interface]
Syntax Description
network (Optional) Destination network number. mask Network mask in the form A.B.C.D (destination prefix). length Mask length (1 to 32). local-tag vpi vci (Optional) Select label (tag) VC value assigned by this router. remote-tag vpi vci (Optional) Select label (tag) values assigned by the other router. neighbor interface (Optional) Select label (tag) values assigned by neighbor on a specified interface.
To display the ATM LDP label capabilities, use the show tag-switching atm-tdp capability command in privileged EXEC mode.
show tag-switching atm-tdp capabilitySyntax Description
This command has no arguments or keywords.
To display summary information on ATM label bindings, use the show tag-switching atm-tdp summary command in privileged EXEC mode.
show tag-switching atm-tdp summarySyntax Description
This command has no arguments or keywords.
To display the CoS map used to assign a quantity of label VCs (LVCs) and an associated class of service of those LVCs, use the show tag-switching cos-map command in EXEC mode.
show tag-switching cos-mapSyntax Description
This command has no arguments or keywords.
To display the contents of the Label Forwarding Information Base (LFIB), use the show tag-switching forwarding-table command in privileged EXEC mode.
show tag-switching forwarding-table [{network {mask | length} | tags tag [- tag] | interface interface | next-hop address | tsp-tunnel [tunnel-id ]}] [detail]
Syntax Description
network (Optional) Destination network number. mask (Optional) IP address of destination mask whose entry is to be shown. length (Optional) Number of bits in mask of destination. tags tag - tag (Optional) Shows entries with specified local labels only. interface interface (Optional) Shows entries with specified outgoing interface only. next-hop address (Optional) Shows entries with specified neighbor as next hop only. tsp-tunnel [tunnel-id] (Optional) Shows entries with specified LSP tunnel only, or all LSP tunnel entries. detail (Optional) Displays information in long form (includes length of encapsulation, length of MAC string, maximum transmission unit (MTU), and all labels).
Syntax Description
vrf-name Displays NLRIs associated with the named VRF. ip-prefix/length (Optional) IP prefix address (in dotted decimal format) and length of mask (0 to 32). mask (Optional) Destination network mask, in dotted decimal format. detail (Optional) Displays detailed information on the VRF routes. output-modifiers (Optional) For a list of associated keywords and arguments, use context-sensitive help.
To display information about one or more interfaces that have the MPLS feature enabled, use the
show tag-switching interfaces command in EXEC mode.
Syntax Description
interface (Optional) The interface about which to display MPLS information. detail (Optional) Displays information in long form.
To show the prefix map used to assign a CoS map to network prefixes matching a standard IP access list, use the show tag-switching prefix-map command in EXEC mode.
show tag-switching prefix-map [prefix-map]
Syntax Description
prefix-map Specifies the prefix-map number.
To display the contents of the label information base (LIB), use the show tag-switching tdp bindings command in privileged EXEC mode.
show tag-switching tdp bindings [network {mask | length} [longer-prefixes]] [local-tag tag tag [- tag]] [neighbor address] [local]
Syntax Description
network (Optional) Destination network number. mask (Optional) Network mask written as A.B.C.D. length (Optional) Mask length (1 to 32 characters). longer-prefixes (Optional) Selects any prefix that matches mask with length to 32. local-tag tag - tag (Optional) Displays entries matching local label values by this router. Use the - tag argument to indicate label range. remote-tag tag - tag (Optional) Displays entries matching label values assigned by a neighbor router. Use the - tag argument to indicate label range. neighbor address (Optional) Displays label bindings assigned by selected neighbor. local (Optional) Displays local label bindings.
Posted: Wed Jul 26 13:17:56 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.