|
|
This chapter explains the function and syntax of the Token Ring route switch module commands. For more information about defaults and usage guidelines, see the corresponding chapter of the Cisco IOS Bridging and IBM Networking Command Reference, Volume 1, Release 12.1.
To clear duplicate ring protocol (DRiP) counters from the RSM interfaces, use the clear drip counters privileged EXEC command.
clear drip countersSyntax Description
This command has no arguments or keywords.
To configure a Token Ring or Ethernet interface on the RSM, use the interface vlan interface configuration command.
interface vlan vlanid type [trbrf | ethernet]
Syntax Description
vlanid Unique VLAN ID number used to create a VLAN. trbrf | ethernet (Optional) RSM Interface type.
To create a pseudo ring on the RSM and to terminate the RIF when routing IP or IPX source-routed traffic on Token Ring VLAN (TrBRF) interfaces, use the multiring trcrf-vlan interface configuration command. Use the no form of this command to disable the termination of RIFs on the RSM interface.
multiring trcrf-vlan vlanid ring-group ring-number
Syntax Description
vlanid VLAN ID number. Valid VLAN ID numbers are 2 through 1000. ring-group ring-number Keyword that specifies the pseudo ring number used to terminate the RIF.
To display the status of the DRiP database for a router or an RSM, use the show drip privileged EXEC command.
show dripSyntax Description
This command has no arguments or keywords.
To attach a VLAN to the RSM's virtual ring when source-route bridging, use the source-bridge trcrf-vlan interface configuration command. Use the no form of the command to disable the attachment of a VLAN to the RSM's virtual ring.
source-bridge trcrf-vlan vlanid ring-group ringnum
Syntax Description Description
vlanid VLAN ID number. ring-group ringnum Pseudo ring number that corresponds to the virtual ring number for the interface.
Posted: Wed Jul 26 11:24:39 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.