|
|
This chapter explains the function and syntax of the Unicast Reverse Path Forwarding commands. For more information about defaults and usage guidelines, see the corresponding chapter of the Cisco IOS Security Command Reference, Release 12.1.
To enable Unicast Reverse Path Forwarding (Unicast RPF), use the ip verify unicast reverse-path command in interface configuration mode. To disable Unicast RPF, use the no form of this command.
ip verify unicast reverse-pathSyntax Description
This command has no arguments or keywords.
Posted: Wed Jul 26 17:12:57 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.