Port to Application Mapping Commands

This chapter explains the function and syntax of the Port to Application Mapping (PAM) commands. For more information about defaults and usage guidelines, see the corresponding chapter of the Cisco IOS Security Command Reference, Release 12.1.

ip port-map

To establish Port to Application Mapping (PAM), use the ip port-map configuration command. Use the no form of this command to delete user-defined PAM entries.

ip port-map appl_name port port_num [list acl_num]

no ip port-map appl_name port port_num [list acl_num]

Syntax Description

appl_name

Specifies the name of the application with which to apply the port mapping.

port

Indicates that a port number maps to the application.

port_num

Identifies a port number in the range 1 to 65535.

list

Indicates that the port mapping information applies to a specific host or subnet.

acl_num

Identifies the standard access control list (ACL) number used with PAM.

appl_name	Specifies the name of the application with which to apply the port mapping.
port	Indicates that a port number maps to the application.
port_num	Identifies a port number in the range 1 to 65535.
list	Indicates that the port mapping information applies to a specific host or subnet.
acl_num	Identifies the standard access control list (ACL) number used with PAM.

show ip port-map

To display the Port to Application Mapping (PAM) information, use the show ip port-map privileged EXEC command.

show ip port-map [appl_name | port port_num]

Syntax Description

appl_name

Specifies the name of the application to which to apply the port mapping.

port port_num

Specifies the alternative port number that maps to the application.

appl_name	Specifies the name of the application to which to apply the port mapping.
port port_num	Specifies the alternative port number that maps to the application.

Table of Contents