|
|
The following sections describe the documentation available for Cisco IOS Release 12.1. These documents consist of software installation guides, Cisco IOS configuration and command references, system error messages, and other documents.
Documentation is available as printed manuals or electronic documents.
Use the release notes described in the following sections with these documents:
The following document is specific to Release 12.1 and is located on CCO and the Documentation CD-ROM:
On CCO at:
Technical Documents> Documentation Home Page> Cisco IOS Software Configuration> Cisco IOS Release 12.1> Caveats
On the Documentation CD-ROM at:
Cisco Product Documentation> Cisco IOS Software Configuration> Cisco IOS Release 12.1> Caveats
 |
Note If you have an account with CCO, you can use Bug Navigator II to find caveats of any severity for any release. You can reach Bug Navigator II on CCO at Software Center> Cisco IOS Software> Cisco Bug Toolkit> Cisco Bugtool Navigator II, or at http://www.cisco.com/support/bugtools. |
The Cisco IOS software documentation set consists of the Cisco IOS configuration guides, Cisco IOS command references, and several other supporting documents that are shipped with your order in electronic form on the Documentation CD-ROM—unless you specifically ordered printed versions.
Each module in the Cisco IOS documentation set consists of two types of books: a configuration guide and a corresponding command reference. Chapters in a configuration guide describe protocols, configuration tasks, and Cisco IOS software functionality, and contain comprehensive configuration examples. Chapters in a command reference provide complete command syntax information. Use each configuration guide with its corresponding command reference.
The Cisco IOS software documentation set is available on CCO and on the Documentation CD-ROM.
On CCO at:
Technical Documents> Documentation Home Page> Cisco IOS Software Configuration> Cisco IOS Release 12.1> Configuration Guides and Command References
On the Documentation CD-ROM at:
Cisco Product Documentation> Cisco IOS Software Configuration> Cisco IOS Release 12.1> Configuration Guides and Command References
Table 83 describes the contents of the Cisco IOS Release 12.1 software documentation set, which is available in both electronic and printed form.
|
Note You can find the most current Cisco IOS documentation on CCO and the Documentation CD-ROM. These electronic documents may contain updates and modifications made after the hard-copy documents were printed. |
On CCO at:
Technical Documents> Documentation Home Page> Cisco IOS Software Configuration> Cisco IOS Release 12.1
On the Documentation CD-ROM at:
Cisco Product Documentation> Cisco IOS Software Configuration> Cisco IOS Release 12.1
| Books | Chapter Topics |
|---|---|
| Configuration Fundamentals Overview Using the Command-Line Interface Using Configuration Tools Configuring Operating Characteristics Managing Connections, Menus, and System Banners Using the Cisco Web Browser Using the Cisco IOS File System Modifying, Downloading, and Maintaining Configuration Files Loading and Maintaining System Images Maintaining Router Memory Rebooting a Router Configuring Additional File Transfer Functions Monitoring the Router and Network Troubleshooting a Router Performing Basic System Management System Management Using System Controllers Web Scaling Using WCCP Managing Dial Shelves |
| Overview of Apollo Domain, Banyan VINES, DECnet, ISO Configuring Apollo Domain Configuring Banyan VINES Configuring DECnet Configuring ISO CLNS Configuring XNS |
| AppleTalk and Novel IPX Overview Configuring AppleTalk Configuring Novell IPX |
| Overview of SNA Internetworking Overview of Bridging Configuring Transparent Bridging Configuring Source-Route Bridging Configuring Token Ring Inter-Switch Link Configuring Token Ring Route Switch Module Overview of IBM Networking Configuring Remote Source-Route Bridging Configuring Data-Link Switching Plus+ Configuring Serial Tunnel and Block Serial Tunnel Configuring LLC2 and SDLC Parameters Configuring IBM Network Media Translation Configuring Frame Relay Access Support Configuring NCIA Server Configuring the Airline Product Set Configuring DSPU and SNA Service Point Support Configuring SNA Switching Services Configuring Cisco Transaction Connection Configuring Cisco Mainframe Channel Connection Adapters Configuring CLAW and TCP/IP Offload Support Configuring CMPC and CSNA Configuring CMPC+ Configuring the TN3270 Server |
| Large-Scale Dial Solutions Cost-Control Solutions Virtual Private Networks X.25 on ISDN Solutions Telco Solutions Dial-Related Addressing Services Internetworking Dial Access Scenarios Preparing for Dial Access Modem Configuration and Management ISDN and Signalling Configuration PPP Configuration Dial-on-Demand Routing Configuration Dial-Backup Configuration Terminal Service Configuration |
| Interface Configuration Overview Configuring LAN Interfaces Configuring Serial Interfaces Configuring Logical Interfaces |
| IP Overview Configuring IP Addressing Configuring DHCP Configuring IP Services Configuring Mobile IP Configuring On-Demand Routing Configuring RIP Configuring IGRP Configuring OSPF Configuring IP Enhanced IGRP Configuring Integrated IS-IS Configuring BGP Configuring Multicast BGP Configuring IP Routing Protocol-Independent Features Configuring IP Multicast Routing Configuring Multicast Source Discovery Protocol Configuring PGM Router Assist Configuring Unidirectional Link Routing Using IP Multicast Tools |
| Multiservice Applications Overview Configuring Voice over IP Configuring Gatekeepers (Multimedia Conference Manager) Configuring Voice over Frame Relay Configuring Voice over ATM Configuring Voice over HDLC Configuring Voice-Related Support Features Configuring PBX Signalling Configuring Store and Forward Fax Configuring Video Support Configuring Head-End Broadband Access Router Features Configuring Subscriber-End Broadband Access Router Configuring Synchronized Clocking |
| Quality of Service Overview Classification Overview Configuring Policy-Based Routing Configuring QoS Policy Propagation via Border Gateway Configuring Committed Access Rate Congestion Management Overview Configured Weighted Fair Queueing Configuring Custom Queueing Configuring Priority Queueing Congestion Avoidance Overview Configuring Weighted Random Early Detection Policing and Shaping Overview Configuring Generic Traffic Shaping Configuring Frame Relay and Frame Relay Traffic Shaping Signalling Overview Configuring RSVP Configuring Subnetwork Bandwidth Manager Configuring RSVP-ATM Quality of Service Interworking Link Efficiency Mechanisms Overview Configuring Link Fragmentation and Interleaving for Multilink Configuring Compressed Real-Time Protocol IP to ATM CoS Overview Configuring IP to ATM CoS QoS Features for Voice Introduction |
| Security Overview AAA Overview Configuring Authentication Configuring Authorization Configuring Accounting Configuring RADIUS Configuring TACACS+ Configuring Kerberos RADIUS Commands TACACS+ Commands Access Control Lists: Overview and Guidelines Cisco Secure Integrated Software Firewall Overview Configuring Lock-and-Key Security (Dynamic Access Lists) Configuring IP Session Filtering (Reflexive Access Lists) Configuring TCP Intercept (Prevent Denial-of-Service Attacks) Configuring Context-Based Access Control Configuring Cisco Secure Integrated Software Intrusion Configuring Authentication Proxy Configuring Port to Application Mapping IP Security and Encryption Overview Configuring IPSec Network Security Configuring Certification Authority Inoperability Configuring Internet Key Exchange Security Protocol Configuring Passwords and Privileges Neighbor Router Authentication: Overview and Guidelines Configuring IP Security Options |
| Cisco IOS Switching Services Overview Switching Paths Overview Configuring Switching Paths Cisco Express Forwarding Overview Configuring Cisco Express Forwarding NetFlow Switching Overview Configuring NetFlow Switching MPLS Overview Configuring MPLS Configuring IP Multilayer Switching Configuring IP Multicast Multilayer Switching Configuring IPX Multilayer Switching Configuring Multicast Distributed Switching Routing Between VLANs Overview Configuring Routing Between VLANs with ISL Encapsulation Configuring Routing Between VLANs with IEEE 802.10 Configuring Routing Between VLANs with IEEE 802.1Q Encapsulation LAN Emulation Overview Configuring LAN Emulation Configuring Token Ring LANE MPOA Overview Configuring the MPOA Client Configuring the MPOA Server Configuring Token Ring LANE for MPOA |
| Wide-Area Networking Overview Configuring ATM Frame Relay Frame Relay-ATM Interworking Configuring SMDS Configuring X.25 and LAPB |
|
|
|
Note Cisco Management Information Base (MIB) User Quick Reference is no longer published. If you have an account with CCO, you can find the latest list of MIBs supported by Cisco. To reach the Cisco Network Management Toolkit, click Login at CCO and go to Software Center> Network Mgmt Products> Cisco Network Management Toolkit. |
You can access the most current Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.
Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM is updated monthly. Therefore, it is probably more current than printed documentation. The CD-ROM package is available as a single unit or as an annual subscription.
Registered CCO users can order the Documentation CD-ROM and other Cisco Product documentation through our online Subscription Services at http://www.cisco.com/cgi-bin/subcat/kaojump.cgi.
Nonregistered CCO users can order documentation through a local account representative by calling Cisco's corporate headquarters (California, USA) at 408 526-4000 or, in North America, call 800 553-NETS (6387).
Cisco provides Cisco Connection Online (CCO) as a starting point for all technical assistance. Warranty or maintenance contract customers can use the Technical Assistance Center. All customers can submit technical feedback on Cisco documentation using the web, e-mail, a self-addressed stamped response card included in many printed docs, or by sending mail to Cisco.
Cisco continues to revolutionize how business is done on the Internet. Cisco Connection Online is the foundation of a suite of interactive, networked services that provides immediate, open access to Cisco information and resources at anytime, from anywhere in the world. This highly integrated Internet application is a powerful, easy-to-use tool for doing business with Cisco.
CCO's broad range of features and services helps customers and partners to streamline business processes and improve productivity. Through CCO, you will find information about Cisco and our networking solutions, services, and programs. In addition, you can resolve technical issues with online support services, download and test software packages, and order Cisco learning materials and merchandise. Valuable online skill assessment, training, and certification programs are also available.
Customers and partners can self-register on CCO to obtain additional personalized information and services. Registered users may order products, check on the status of an order and view benefits specific to their relationships with Cisco.
You can access CCO in the following ways:
You can e-mail questions about using CCO to cco-team@cisco.com.
The Cisco Technical Assistance Center (TAC) is available to warranty or maintenance contract customers who need technical assistance with a Cisco product that is under warranty or covered by a maintenance contract.
To display the TAC web site that includes links to technical support information and software upgrades and for requesting TAC support, use www.cisco.com/techsupport.
To contact by e-mail, use one of the following:
Language | E-mail Address |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
In North America, TAC can be reached at 800 553-2447 or 408 526-7209. For other telephone numbers and TAC e-mail addresses worldwide, consult the following web site: http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml.
If you have a CCO login account, you can access the following URL, which contains links and tips on configuring your Cisco products:
http://www.cisco.com/kobayashi/technotes/serv_tips.shtml
This URL is subject to change without notice. If it changes, point your Web browser to CCO and click on this path: Products & Technologies> Products> Technical Tips.
The following sections are provided from the Technical Tips page:
If you are reading Cisco product documentation on the World Wide Web, you can submit technical comments electronically. Click Feedback in the toolbar and select Documentation. After you complete the form, click Submit to send it to Cisco.
You can e-mail your comments to bug-doc@cisco.com.
To submit your comments by mail, for your convenience many documents contain a response card behind the front cover. Otherwise, you can mail your comments to the following address:
Cisco Systems, Inc.
Document Resource Connection
170 West Tasman Drive
San Jose, CA 95134-9883
We appreciate and value your comments.
Posted: Thu Aug 31 10:36:07 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.