cc/td/doc/product/software/ios121/121relnt
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

Release Notes for Cisco AS5200 Universal Access Servers for Cisco IOS Release 12.1

Release Notes for Cisco AS5200 Universal Access Servers for Cisco IOS Release 12.1

September 5, 2000


Note   You can find the most current Cisco IOS documentation on Cisco Connection Online CCO.  These electronic documents may contain updates and modifications made after the hardcopy documents were printed.

These release notes for Cisco AS5200 universal access servers support Cisco IOS Release 12.1(4). These release notes are updated to describe new memory requirements, hardware support, software platform deferrals, and changes to the microcode or modem code and related documents.

For a list of the software caveats that apply to Cisco IOS Release 12.1, see Caveats for Cisco  IOS   Release 12.1 that accompanies these release notes. The caveats document is updated for every maintenance release and is located on Cisco Connection Online (CCO)  and the Documentation CD-ROM.

Use these release notes with Cross-Platform Release Notes for Cisco IOS Release 12.1 on CCO  and the Documentation CD-ROM.

Contents

These release notes describe the following topics:

System Requirements

This section describes the system requirements for Cisco IOS Release 12.1:

Memory Recommendations


Table 1: Memory Recommendations for the Cisco AS5200
Image Name Software Image Flash
Memory
Recommended
DRAM
Memory
Recommended
Runs from

IP

c5200-i-1

16 MB

16 MB

Flash

IP Plus

c5200-is-1

16 MB

16 MB

Flash

Desktop

c5200-d-1

16 MB

16 MB

Flash

Desktop Plus

c5200-ds-1

16 MB

16 MB

Flash

Hardware Supported

Cisco IOS Release 12.1 supports the Cisco AS5200. For detailed descriptions of the new hardware features, see the "New and Changed Information" section. Table 2 lists the interfaces supported by the Cisco A5200.


Table 2: Supported Interfaces for the Cisco AS5200
Interface, Network Module, or Data Rate Product Description In1
LAN Interfaces

Ethernet (AUI)

MultiChannel Interface (Channelized E1/T1)

WAN Data Rates

48/56/64 Kbps

1.544/2.048 Mbps

WAN Interfaces and Network Modules2

EIA/TIA-232

X.21

V.35

EIA/TIA-449

EIA-530

ISDN PRI

E1-G.703/G.704

Channelized T1

Channelized E1

Serial

1The number in the "In" column indicates the Cisco IOS release when the interface was introduced. For example, (4) means an interface was introduced in Cisco IOS Release 12.1(4). If a cell in this column is empty, the interface was included in the initial base release.
2The ATM-25 network modules require Cisco  IOS Plus feature sets.

Determining the Software Version

To determine the version of Cisco IOS software running on your Cisco AS5200, log in to the Cisco AS5200 and enter the show version EXEC command:

    router> show version
    Cisco Internetwork Operating System Software 
    IOS (tm) 12.1 Software c5200-i-l, Version 12.1(4), RELEASE SOFTWARE
    

Upgrading to a New Software Release

For general information about upgrading to a new software release, see Cisco  IOS Upgrade Ordering Instructions  located at:

http://www.cisco.com/warp/public/cc/pd/iosw/prodlit/957_pp.htm

Modem Code

Microcode software images are bundled with the system software image—with the exception of the Channel Interface Processor (CIP) microcode (all system software images). Bundling eliminates the need to store separate microcode images. When the router starts, the system software unpacks the microcode software bundle and loads the proper software on all the interface processor boards. Table 3 lists the current microcode versions for the Cisco AS5200.

You could have received a later version of modem code than the one bundled with the Cisco IOS software. The modem code in Flash memory is mapped to the modems. Unless you fully understand how Cisco IOS software uses modem code, it is important to keep the factory configuration.

The modem code release notes are on CCO and on the Documentation CD-ROM.

On CCO at:

Technical Documents: Documentation Home Page: Access Servers and Access Routers: Firmware and Portware Information

On the Documentation CD-ROM at:

Cisco Product Documentation: Access Servers and Access Routers:Firmware and Portware Information


Table 3: Current Microcode Versions for the Cisco AS5200
Modem Code Module Current Bundled Microcode Version Minimum Version Required

Microcom modems

Microcom Version 5.1.20

Release 12.0(5)T and later

MICA modems

MICA portware Version 2.7.1.0

Release 12.0(5)T and later

Feature Set Tables

The Cisco IOS software is packaged in feature sets consisting of software images—depending on the platform. Each feature set contains a specific set of Cisco IOS features.


Caution Cisco IOS images with strong encryption (including, but not limited to 168-bit (3DES) data encryption feature sets) are subject to United States government export controls and have limited distribution. Strong encryption images to be installed outside the United States are likely to require an export license. Customer orders may be denied or subject to delay due to United States government regulations. When applicable, purchaser/user must obtain local import and use authorizations for all encryption strengths. Please contact your sales representative or distributor for more information, or send an e-mail to export@cisco.com.

Table 4 lists the features and feature sets supported by the Cisco AS5200 in Cisco IOS Release 12.1 and uses the following conventions:


Note   This feature set table might contain a selected list of features. This table might not be cumulative or list all the features in each image.


Table 4: Feature List by Feature Set for the Cisco AS5200
Features Software Images by Feature Set
IP IP
Plus
Desktop Desktop
Plus

Authentication and Accounting

Selecting AAA Server Groups Based on DNIS

Yes

Yes

Yes

Yes

IP Routing

Asynchronous Serial Traffic over UDP

Yes

Yes

Yes

Yes

Easy IP (Phase 2) DHCP Server

Yes

Yes

Yes

Yes

Flow-based WRED

Yes

Yes

Yes

Yes

LAN Support

CLI String Search

Yes

Yes

Yes

Yes

Configuring RADIUS for Multiple User Datagram Protocol Ports

Yes

Yes

Yes

Yes

Dynamic Multiple Encapsulation for Dial-In over ISDN

Yes

Yes

Yes

Yes

ISDN LAPB-TA

Yes

Yes

Yes

Yes

Large Scale Dialout

Yes

Yes

No

No

Layer 2 Tunneling Protocol (L2TP)

No

Yes

No

Yes

LTP2 Dialout

No

Yes

No

Yes

Parse Bookmarks

Yes

Yes

Yes

Yes

Subnetwork Bandwidth Manager

Yes

Yes

Yes

Yes

SS7

No

Yes

No

Yes

Management

Cisco SNMP Version 3

Yes

Yes

Yes

Yes

CNS Client for Cisco IOS Software

No

No

No

No

CNS client for IOS 12.05(t) (aka IPSec Policy Agent II)

No

No

No

No

ISDN MIB RFC 2127

Yes

Yes

Yes

Yes

Multicast Routing Monitor

Yes

Yes

Yes

Yes

Process MIB

Yes

Yes

Yes

Yes

Security

Resource Pool Management

Yes

Yes

Yes

Yes

Resource Pool Management with Direct Remote Services

Yes

Yes

Yes

Yes

New and Changed Information

The following is a list the new hardware and software feature categories supported by the Cisco AS5200 for Cisco IOS Release 12.1. These categories are broken down by feature in Table 4.

Limitations and Restrictions

MIBs

Old Cisco Management Information Bases (MIBs) will be replaced in a future release. Currently, OLD-CISCO-* MIBs are being converted into more scalable MIBs—without affecting existing Cisco IOS products or NMS applications. You can update from deprecated MIBs to the replacement MIBs as shown in Table 5.


Table 5: Deprecated and Replacement MIBs
Deprecated MIB Replacement

OLD-CISCO-APPLETALK-MIB

RFC1243-MIB

OLD-CISCO-CHASSIS-MIB

ENTITY-MIB

OLD-CISCO-CPUK-MIB

To be decided

OLD-CISCO-DECNET-MIB

To be decided

OLD-CISCO-ENV-MIB

CISCO-ENVMON-MIB

OLD-CISCO-FLASH-MIB

CISCO-FLASH-MIB

OLD-CISCO-INTERFACES-MIB

IF-MIB CISCO-QUEUE-MIB

OLD-CISCO-IP-MIB

To be decided

OLD-CISCO-MEMORY-MIB

CISCO-MEMORY-POOL-MIB

OLD-CISCO-NOVELL-MIB

NOVELL-IPX-MIB

OLD-CISCO-SYS-MIB

(Compilation of other OLD* MIBs)

OLD-CISCO-SYSTEM-MIB

CISCO-CONFIG-COPY-MIB

OLD-CISCO-TCP-MIB

CISCO-TCP-MIB

OLD-CISCO-TS-MIB

To be decided

OLD-CISCO-VINES-MIB

CISCO-VINES-MIB

OLD-CISCO-XNS-MIB

To be decided


Note   Cisco Management Information Base (MIB) User Quick Reference is no longer published. If you have an account with CCO, you can find the current list of MIBs supported by Cisco. To reach the Cisco Network Management Toolkit, go to CCO, press Login, and click to Software Center: Network Mgmt Products: Cisco Network Management Toolkit: Cisco MIB.

Caveats

Caveats describe unexpected behavior in Cisco IOS software releases. Severity 1 caveats are the most serious caveats; severity 2 caveats are less serious.

For information on caveats in Cisco IOS Release 12.1, see Caveats for Cisco  IOS Release 12.1, which lists severity 1 and 2 caveats for Cisco IOS Release 12.1 and is located on CCO  and the Documentation CD-ROM.


Note   If you have an account with CCO, you can use Bug Navigator II to find caveats of any severity for any release. To reach Bug Navigator II, go to CCO and press Login. Then go to Software Center: Cisco IOS Software: Cisco Bugtool Navigator II. Another option is to go to http://www.cisco.com/support/bugtools.

Related Documentation

The following sections describe the documentation available for the Cisco AS5200. These documents consist of hardware and software installation guides, Cisco IOS configuration and command references, system error messages, and other documents.

Documentation is available as printed manuals or electronic documents.

Use these release notes with these documents:

Release-Specific Documents

The following documents are specific to Release 12.1 and are located on CCO  and the Documentation CD-ROM:

  On CCO  at:
  Technical Documents: Documentation Home Page: Cisco IOS Software Configuration: Cisco IOS Release 12.1
  On the Documentation CD-ROM at:
  Cisco Product Documentation: Cisco IOS Software Configuration: Cisco IOS Release 12.1: Release Notes: Cross-Platform Release Notes
  Technical Documents
  See Caveats for Cisco  IOS Release 12.1, which contain caveats applicable to all platforms for all maintenance releases of Release 12.1.
  On CCO  at:
  Technical Documents: Documentation Home Page: Cisco IOS Software Configuration: Cisco IOS Release 12.1: Caveats
  On the Documentation CD-ROM at:
  Cisco Product Documentation: Cisco IOS Software Configuration: Cisco IOS Release 12.1: Caveats

Platform-Specific Documents

These documents are available for the Cisco AS5200 on CCO  and the Documentation CD-ROM:

You can reach Cisco AS5200 documentation on CCO at:

Technical Documents: Documentation Home Page: Access Servers and Access Routers: Access Servers: Cisco AS5200

You can reach Cisco AS5200 documentation on the Documentation CD-ROM at:

Cisco Product Documentation: Access Servers and Access Routers: Access Servers: Cisco AS5200

Cisco IOS Software Documentation Set

The Cisco IOS software documentation set consists of the Cisco IOS configuration guides, Cisco IOS command references, and several other supporting documents that are shipped with your order in electronic form on the Documentation CD-ROM—unless you specifically ordered the printed versions.

Documentation Modules

Each module in the Cisco IOS documentation set consists of two books: a configuration guide and a corresponding command reference. Chapters in a configuration guide describe protocols, configuration tasks, Cisco IOS software functionality, and contain comprehensive configuration examples. Chapters in a command reference provide complete command syntax information. Use each configuration guide with its corresponding command reference.

On CCO  and the Documentation CD-ROM, two master hot-linked documents provide information for the Cisco IOS software documentation set.

On CCO  at:

Technical Documents: Documentation Home Page: Cisco IOS Software Configuration: Cisco IOS Release 12.1: Configuration Guides and Command References

On the Documentation CD-ROM at:

Cisco Product Documentation: Cisco IOS Software Configuration: Cisco IOS Release 12.1: Configuration Guides and Command References

Cisco IOS Release 12.1 Documentation Set

Table 6 describes the contents of the Cisco IOS Release 12.0 software documentation set, which is available in electronic form and in printed form ordered.


Note   You can find the most current Cisco IOS documentation on CCO  and the Documentation CD-ROM. These electronic documents may contain updates and modifications made after the hard-copy documents were printed.

On CCO  at:

Technical Documents: Documentation Home Page: Cisco IOS Software Configuration: Cisco IOS Release 12.1

On the Documentation CD-ROM at:

Cisco Product Documentation: Cisco IOS Software Configuration: Cisco IOS Release 12.1


Table 6: Cisco IOS Software Release 12.1 Documentation Set
Books Chapter Topics

  • Configuration Fundamentals Configuration Guide

  • Configuration Fundamentals Command Reference

Configuration Fundamentals Overview
Cisco IOS User Interfaces
File Management
System Management

  • Bridging and IBM Networking Configuration Guide

  • Bridging and IBM Networking Command Reference

Transparent Bridging
Source-Route Bridging
Token Ring Inter-Switch Link
Remote Source-Route Bridging
DLSw+
STUN and BSTUN
LLC2 and SDLC
IBM Network Media Translation
DSPU and SNA Service Point
SNA Frame Relay Access Support
APPN
Cisco Database Connection
NCIA Client/Server Topologies
Cisco Mainframe Channel Connection
Airline Product Set

  • Dial Solutions Configuration Guide

  • Dial Solutions Command Reference

X.25 over ISDN
Appletalk Remote Access
Asynchronous Callback, DDR, PPP, SLIP
Bandwidth Allocation Control Protocol
ISDN Basic Rate Service
ISDN Caller ID Callback
PPP Callback for DDR
Channelized E1 & T1
Dial Backup for Dialer Profiles
Dial Backup Using Dialer Watch
Dial Backup for Serial Lines
Peer-to-Peer DDR with Dialer Profiles
DialOut
Dial-In Terminal Services
Dial-on-Demand Routing (DDR)
Dial Backup
Dial-Out Modem Pooling
Large-Scale Dial Solutions
Cost-Control Solutions
Virtual Private Dialup Networks
Dial Business Solutions and Examples

  • Cisco IOS Interface Configuration Guide

  • Cisco IOS Interface Command Reference

Interface Configuration Overview
LAN Interfaces
Logical Interfaces
Serial Interfaces

  • Network Protocols Configuration Guide, Part 1

  • Network Protocols Command Reference, Part 1

IP Overview
IP Addressing and Services
IP Routing Protocols

  • Network Protocols Configuration Guide, Part 2

  • Network Protocols Command Reference, Part 2

AppleTalk
Novell IPX

  • Network Protocols Configuration Guide, Part 3

  • Network Protocols Command Reference, Part 3

Network Protocols Overview
Apollo Domain
Banyan VINES
DECnet
ISO CLNS
XNS

  • Security Configuration Guide

  • Security Command Reference

AAA Security Services
Security Server Protocols
Traffic Filtering and Firewalls
IP Security and Encryption
Passwords and Privileges
Neighbor Router Authentication
IP Security Options

  • Cisco IOS Switching Services Configuration Guide

  • Cisco IOS Switching Services Command Reference

Switching Services
Switching Paths for IP Networks
Virtual LAN (VLAN) Switching and Routing

  • Wide-Area Networking Configuration Guide

  • Wide-Area Networking Command Reference

Wide-Area Network Overview
ATM
Frame Relay
SMDS
X.25 and LAPB

  • Voice, Video, and Home Applications Configuration Guide

  • Voice, Video, and Home Applications Command Reference

Voice over IP
Voice over Frame Relay
Voice over ATM
Voice over HDLC
Frame Relay-ATM Internetworking
Synchronized Clocks
Video Support
Universal Broadband Features

  • Quality of Service Solutions Configuration Guide

  • Quality of Service Solutions Command Reference

Policy-Based Routing
QoS Policy Propagation via BGP
Committed Access Rate
Weighted Fair Queueing
Custom Queueing
Priority Queueing
Weighted Random
Early Detection
Scheduling
Signaling
RSVP
Packet Drop
Frame Relay Traffic Shaping
Link Fragmentation
RTP Header Compression

  • Cisco IOS Configuration Guide Master Index

  • Cisco IOS Command Reference Master Index

  • Cisco IOS Software Command Summary

  • Dial Solutions Quick Configuration Guide

  • System Error Messages

  • Debug Command Reference

 


Note   Cisco Management Information Base (MIB) User Quick Reference is no longer published. If you have an account with CCO, you can find the current list of MIBs supported by Cisco. To reach the Cisco Network Management Toolkit, go to CCO, press Login, and click to Software Center: Network Mgmt Products: Cisco Network Management Toolkit: Cisco MIB.

Obtaining Documentation

World Wide Web

You can access the most current Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.

Documentation CD-ROM

Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM is updated monthly. Therefore, it is probably more current than printed documentation. The CD-ROM package is available as a single unit or as an annual subscription.

Ordering Documentation

Registered CCO users can order the Documentation CD-ROM and other Cisco Product documentation through our online Subscription Services at http://www.cisco.com/cgi-bin/subcat/kaojump.cgi.

Nonregistered CCO users can order documentation through a local account representative by calling Cisco's corporate headquarters (California, USA) at 408 526-4000 or, in North America, call 800 553-NETS (6387).

Obtaining Technical Assistance

Cisco provides Cisco Connection Online (CCO)  as a starting point for all technical assistance. Warranty or maintenance contract customers can use the Technical Assistance Center. All customers can submit technical feedback on Cisco documentation using the web, e-mail, a self-addressed stamped response card included in many printed documents, or by sending mail to Cisco.

Cisco Connection Online

Cisco continues to revolutionize how business is done on the Internet. Cisco Connection Online is the foundation of a suite of interactive, networked services that provides immediate, open access to Cisco information and resources at anytime, from anywhere in the world. This highly integrated Internet application is a powerful, easy-to-use tool for doing business with Cisco.

CCO's broad range of features and services helps customers and partners to streamline business processes and improve productivity. Through CCO, you will find information about Cisco and our networking solutions, services, and programs. In addition, you can resolve technical issues with online support services, download and test software packages, and order Cisco learning materials and merchandise. Valuable online skill assessment, training, and certification programs are also available.

Customers and partners can self-register on CCO to obtain additional personalized information and services. Registered users may order products, check on the status of an order and view benefits specific to their relationships with Cisco.

You can access CCO  in the following ways:

You can e-mail questions about using CCO to cco-team@cisco.com.

Technical Assistance Center

The Cisco Technical Assistance Center (TAC) is available to warranty or maintenance contract customers who need technical assistance with a Cisco product that is under warranty or covered by a maintenance contract.

To display the TAC web site that includes links to technical support information and software upgrades and for requesting TAC support, use www.cisco.com/techsupport.

To contact by e-mail, use one of the following:

Language
E-mail Address

English

tac@cisco.com

Hanzi (Chinese)

chinese-tac@cisco.com

Kanji (Japanese)

japan-tac@cisco.com

Hangul (Korean)

korea-tac@cisco.com

Spanish

tac@cisco.com

Thai

thai-tac@cisco.com

In North America, TAC can be reached at 800 553-2447 or 408 526-7209. For other telephone numbers and TAC e-mail addresses worldwide, consult the following web site: http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml.

Software Configuration Tips on the Cisco Technical Assistance Center Home Page

If you have a CCO log-in account, you can access the following URL, which contains links and tips on configuring your Cisco products:

http://www.cisco.com/kobayashi/technotes/serv_tips.shtml

This URL is subject to change without notice. If it changes, point your Web browser to CCO,  press login, and click on this path: Technical Assistance Center: Technical Tips.

The following sections are provided from the Technical Tips page:

Documentation Feedback

If you are reading Cisco product documentation on the World Wide Web, you can submit technical comments electronically. Click Feedback in the toolbar and select Documentation. After you complete the form, click Submit to send it to Cisco.

You can e-mail your comments to bug-doc@cisco.com.

To submit your comments by mail, for your convenience many documents contain a response card behind the front cover. Otherwise, you can mail your comments to the following address:

Cisco Systems, Inc.
Document Resource Connection
170 West Tasman Drive
San Jose, CA 95134-9883

We appreciate and value your comments.





hometocprevnextglossaryfeedbacksearchhelp
Posted: Tue Sep 5 14:44:24 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.