cc/td/doc/product/software/ios121/121relnt
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

Release Notes for the Cisco 1700 Series Routers  for Cisco IOS Release 12.1(1)XC

Release Notes for the Cisco 1700 Series Routers  for Cisco IOS Release 12.1(1)XC

March 27, 2000

These release notes describe new features and significant software components for the Cisco 1700 series routers that support Cisco IOS Release 12.1 T, up to and including Release 12.1(1)XC. These release notes are updated as needed to describe new memory requirements, new features, new hardware support, software platform deferrals, microcode or modem code changes, related document changes, and any other important changes. Use these release notes with the C ross-Platform Release Notes for  Cisco IOS Release 12.1 T  located on CCO and the Documentation CD-ROM.

For a list of the software caveats that apply to Release 12.1(1)XC, refer to the section "Caveats" and to the online Caveats for Cisco IOS Release 12.1 T  document. The caveats document is updated for every 12.1 T maintenance release and is located on Cisco Connection Online (CCO) and the Documentation CD-ROM.

Contents

These release notes discuss the following topics:

System Requirements

This section describes the system requirements for Release 12.1(1)XC and includes the following sections:

Memory Requirements

This section describes the memory requirements for the Cisco IOS feature sets supported by Cisco IOS Release 12.1(1)XC on the Cisco 1700 series routers.


Table 1: Memory Requirements for the Cisco 1700 Series 
Feature Sets Image Name Software Image Required Flash Memory Required DRAM Memory Runs from

IP Feature Sets

IP Plus IPSec 56 (DES)

c1700-sy56i-mz

8 MB

32 MB

RAM

IP/FW Plus IPSec 56 (DES)

c1700-o3sy56i-mz

8 MB

32 MB

RAM

IP Plus IPSec 3DES

c1700-k2sy-mz

8 MB

32 MB

RAM

IP/FW Plus IPSec 3DES

c1700-k2o3sy-mz

8 MB

32 MB

RAM

IP/IPX/AT/IBM/FW Plus IPSec 56 (DES)

c1700-bno3r2sy56i-mz

8 MB

32 MB

RAM

IP/IPX/AT/IBM/FW Plus IPSec 3DES

c1700-bk2no3r2sy-mz

8 MB

32 MB

RAM

IP/Voice Plus IPSec 56 (DES)

c1700-sv3y56i-mz

8 MB

32 MB

RAM

IP/FW/Voice Plus IPSec 56 (DES)

c1700-o3sv3y56i-mz

8 MB

32 MB

RAM

IP/Voice Plus IPSec 3DES

c1700-k2sv3y-mz

8 MB

32 MB

RAM

IP/FW/Voice Plus IPSec 3DES

c1700-k2o3sv3y-mz

8 MB

32 MB

RAM

IP/IPX/AT/IBM/FW/Voice Plus IPSec 56 (DES)

c1700-bno3r2sv3y56i-mz

16 MB

48 MB

RAM

IP/IPX/AT/IBM/FW/Voice Plus IPSec 3DES

c1700-bk2no3r2sv3y-mz

16 MB

48 MB

RAM

Hardware Supported

Cisco IOS Release 12.1(1)XC supports the Cisco 1700 series routers:

For detailed descriptions of the new hardware features, see the "New and Changed Information" section.

Cisco 1720

The 1720 router provides Internet and intranet access and includes the following:

The Cisco 1720 router has the following hardware components:

The Cisco 1720 router supports any combination of one or two of the following WAN interface cards, which are shared with the Cisco 1600, 2600, and 3600 routers:

Cisco 1750

The voice-and-data capable Cisco 1750 router provides global Internet and company intranet access and includes the following:

The Cisco 1750 router has the following hardware components:

The Cisco 1750 router also supports any combination of one or two of the following WAN interface cards, which are shared with the Cisco 1600, 1720, 2600, and 3600 routers:

The Cisco 1750 router supports any combination of one or two of the following voice interface cards, which are shared with the Cisco 2600 and 3600 routers:

Determining Your Software Release

To determine the version of Cisco IOS software currently running on your Cisco 1700 series router, log in to the router and enter the show version EXEC command. The following sample output from the show version command indicates the version number on the second output line:

router> show version
Cisco Internetwork Operating System Software 
IOS (tm) c1700 Software (c1700-sy56i-mz), Version 12.1(1)XC, RELEASE SOFTWARE
 

Additional command output lines include more information, such as processor revision numbers, memory amounts, hardware IDs, and partition information.

Upgrading to a New Software Release

For information about upgrading to a new software release, refer to the Cisco IOS Upgrade Ordering Instructions product bulletin located at the following URL: http://www.cisco.com/warp/public/cc/cisco/mkt/ios/prodlit/957_pp.htm.  

Alternatively, the Cisco IOS Software page on CCO has a variety of information, including upgrade information, organized by release. If you have a CCO account and log in, you can go directly to: http://www.cisco.com/kobayashi/sw-center/sw-ios.shtml.  

If you have a CCO account and log in, you can reach the Cisco IOS Software page by going to www.cisco.com  and following this path: Service & Support: Software Center: Cisco IOS Software: Cisco IOS 12.1: Ordering Procedures and Hardware Platform Support: Cisco IOS Upgrade Ordering Instructions.

You can also reach the IOS Upgrade Planner, which allows you more flexibility to browse for your preferred software, by going to www.cisco.com  and following this path: Service & Support: Software Center: IOS Upgrade Planner.

Feature Set Tables

The Cisco IOS software is packaged in feature sets consisting of software images—depending on the platform. Each feature set contains a specific set of Cisco IOS features. Release 12.1(1)XC supports the same feature sets as Releases 12.1 and 12.1 T, but Release 12.1(1)XC can include new features supported by the Cisco 1700 series routers. Table 2 lists the feature sets supported by the Cisco 1700 series routers.


Table 2: Feature Sets Supported by the Cisco 1700 Series Routers 
Feature Sets Image Name Feature Set Matrix Terms Software Image Platform In1

IP Feature Sets

IP Plus IPSec 56 (DES)

IP Plus, IPSec 56

c1700-sy56i-mz

Cisco 1720
Cisco 1750

12.0(3)T

IP/FW Plus IPSec 56 (DES)

IP, FW, Plus, IPSec 56

c1700-o3sy56i-mz

Cisco 1720
Cisco 1750

IP Plus IPSec 3DES

Plus, IPSec, 3DES2

c1700-k2sy-mz

Cisco 1720
Cisco 1750

12.0(1)XA3

IP/FW Plus IPSec 3DES

IP, FW, Plus, IPSec, 3DES

c1700-k2o3sy-mz

Cisco 1720
Cisco 1750

IP/IPX/AT/IBM/FW Plus IPSec 56 (DES)

IP, IPX, AT, IBM, FW, Plus, IPSec 56

c1700-bno3r2sy56i-mz

Cisco 1720
Cisco 1750

IP Feature Sets

(continued)

IP/IPX/AT/IBM/FW Plus IPSec 3DES

IP, IPX, AT, IBM, FW, Plus, IPSec, 3DES

c1700-bk2no3r2sy-mz

Cisco 1720
Cisco 1750

IP/Voice Plus IPSec 56 (DES)

IP, Voice, Plus, IPSec 56

c1700-sv3y56i-mz

Cisco 1750

IP/FW/Voice Plus IPSec 56 (DES)

IP, FW, Voice, Plus, IPSec 56

c1700-o3sv3y56i-mz

Cisco 1720
Cisco 1750

IP/Voice Plus IPSec 3DES

Plus, Voice, IPSec, 3DES

c1700-k2sv3y-mz

Cisco 1750

IP/FW/Voice Plus IPSec 3DES

IP, FW, Voice, Plus, IPSec, 3DES

c1700-k2o3sv3y-mz

Cisco 1720
Cisco 1750

IP/IPX/AT/IBM/FW/Voice Plus IPSec 56 (DES)

IP, IPX, AT, IBM, FW, Voice, Plus IPSec 56

c1700-bno3r2sv3y56i-mz

Cisco 1720
Cisco 1750

IP/IPX/AT/IBM/FW/Voice Plus IPSec 3DES

IP, IPX, AT, IBM, FW, Voice, Plus IPSec, 3DES

c1700-bk2no3r2sv3y-mz

Cisco 1720
Cisco 1750

1The number in the "In" column indicates the Cisco IOS release in which the feature was introduced. For example, 12.0(3)T means a feature was introduced in Release 12.0(3)T. If a cell in this column is empty, the feature was included in the initial base release.
2This set of features is provided in the Triple DES (3DES) Encryption data encryption feature sets.


Caution Cisco IOS images with strong encryption (including, but not limited to 168-bit (3DES) data encryption feature sets) are subject to United States government export controls and have limited distribution. Strong encryption images to be installed outside the United States may require an export license. Customer orders may be denied or subject to delay due to United States government regulations. When applicable, the purchaser or the user must obtain local import and use authorizations for all encryption strengths. Contact your sales representative or distributor for more information, or send an e-mail to export@cisco.com.

Table 3 lists the features and feature sets supported by the Cisco 1700 series routers in Cisco IOS Release 12.1(1)XC. Table 4 lists the features and feature sets supported by the Cisco 1750 routers in Cisco IOS Release 12.1(1)XC. Both tables use the following conventions:


Note   These feature set tables only contain a selected list of features. These tables are not cumulative—nor do they list all the features in each image.


Table 3: Feature List by Feature Set for the Cisco 1700 Series Routers 
Feature Sets
Features IP Plus IPSec 56 (DES) IP/FW Plus IPSec 56 (DES) IP Plus IPSec 3DES IP/FW Plus IPSec 3DES IP/IPX/AT /IBM/ FW Plus IPSec 56 (DES) IP/IPX/
AT/IBM/ FW Plus IPSec 3DES
Connectivity

  L2TP Dial-Out

Yes

Yes

Yes

Yes

Yes

Yes

IBM Support

  Bridging Code Rework

Yes

Yes

Yes

Yes

Yes

Yes

  DSLw+ Ethernet Redundancy

No

No

No

No

Yes

Yes

IP Routing

  IP Type of Service and Precedence for GRE Tunnels

Yes

No

Yes

Yes

Yes

Yes

  OSPF Point to Multipoint

No

No

No

No

No

No

Management

  Cisco IOS File System

Yes

Yes

Yes

Yes

Yes

Yes

  Entity MIB

Yes

Yes

Yes

Yes

Yes

Yes

  Expression MIB

Yes

Yes

Yes

Yes

Yes

Yes

  Conditionally Triggered Debugging

Yes

Yes

Yes

Yes

Yes

Yes

  Process MIB

Yes

Yes

Yes

Yes

Yes

Yes

Miscellaneous

  Multicast Source Discovery Protocol

Yes

Yes

Yes

Yes

Yes

Yes

  X.25 Closed User Groups

Yes

Yes

Yes

Yes

Yes

Yes

  X.25 Switch Local Acknowledgment

Yes

Yes

Yes

Yes

Yes

Yes

  VPN Tunnel Management

Yes

Yes

Yes

Yes

Yes

Yes

Multimedia

  Protocol-Independent Multicasts Version 2

Yes

Yes

Yes

Yes

Yes

Yes

Switching

  Web Cache Communications Protocol Version 2 (WCCPv2)

Yes

Yes

Yes

Yes

Yes

Yes

WAN Services

  Always On/Direct ISDN

Yes

Yes

Yes

Yes

Yes

Yes

  Dialer Watch

Yes

Yes

Yes

Yes

Yes

Yes

  DLSw+ Enhancements

No

No

No

No

Yes

Yes

  DLSw+ RSVP

No

No

No

No

Yes

Yes

  MPPC-MS PPP Compression

Yes

Yes

Yes

Yes

Yes

Yes

  MS Callback

Yes

Yes

Yes

Yes

Yes

Yes

  VPDN MIB Feature

Yes

Yes

Yes

Yes

Yes

Yes


Table 4: Feature List by Feature Set for the Cisco 1750 Series Routers 
Feature Sets
Features IP/Voice Plus IPSec 56 (DES) IP/FW/ Voice Plus IPSec 56 (DES) IP/Voice Plus IPSec 3DES IP/FW/Voice Plus IPSec 3DES IP/IPX/AT/ IBM/FW/ Voice Plus IPSec 56 (DES) IP/IPX/ AT/IBM/
FW/Voice Plus IPSec 3DES
Connectivity

  L2TP Dial-Out

Yes

Yes

Yes

Yes

Yes

Yes

IBM Support

  Bridging Code Rework

Yes

Yes

Yes

Yes

Yes

Yes

  DSLw+ Ethernet Redundancy

No

No

No

No

Yes

Yes

IP Routing

  IP Type of Service and Precedence for GRE Tunnels

Yes

No

Yes

Yes

Yes

Yes

  OSPF Point to Multipoint

No

No

No

No

No

No

Management

  Cisco IOS File System

Yes

Yes

Yes

Yes

Yes

Yes

  Entity MIB

Yes

Yes

Yes

Yes

Yes

Yes

  Expression MIB

Yes

Yes

Yes

Yes

Yes

Yes

  Conditionally Triggered Debugging

Yes

Yes

Yes

Yes

Yes

Yes

  Process MIB

Yes

Yes

Yes

Yes

Yes

Yes

Miscellaneous

  Multicast Source Discovery Protocol

Yes

Yes

Yes

Yes

Yes

Yes

  X.25 Closed User Groups

Yes

Yes

Yes

Yes

Yes

Yes

  X.25 Switch Local Acknowledgment

Yes

Yes

Yes

Yes

Yes

Yes

  VPN Tunnel Management

Yes

Yes

Yes

Yes

Yes

Yes

Multimedia

  Protocol-Independent Multicasts Version 2

Yes

Yes

Yes

Yes

Yes

Yes

Switching

  Web Cache Communications Protocol Version 2 (WCCPv2)

Yes

Yes

Yes

Yes

Yes

Yes

Voice Services

  Voice over IP

Yes

Yes

Yes

Yes

Yes

Yes

WAN Services

  Always On/Direct ISDN

Yes

Yes

Yes

Yes

Yes

Yes

  Dialer Watch

Yes

Yes

Yes

Yes

Yes

Yes

  DLSw+ Enhancements

No

No

No

No

Yes

Yes

  DLSw+ RSVP

No

No

No

No

Yes

Yes

  MPPC-MS PPP Compression

Yes

Yes

Yes

Yes

Yes

Yes

  MS Callback

Yes

Yes

Yes

Yes

Yes

Yes

  VPDN MIB Feature

Yes

Yes

Yes

Yes

Yes

Yes

New and Changed Information

The following sections list the new hardware and software features supported by the Cisco 1700 series for Release 12.1 T:

New Hardware Features in Release 12.1(1)XC

The following new hardware enhancements are supported by the Cisco for Release 12.1(1)XC and above. For more information about new hardware, see the "Platform-Specific Documents" section.

Support for the Virtual Private Network Module

Cisco IOS Release 12.1(1)XC includes support for the Cisco Virtual Private Network (VPN) module, which fits into a slot inside the Cisco 1720 or 1750 chassis. The VPN module assists the host processor by accelerating layer 3 IP Security (IPSec) data encryption and decryption. The module supports DES and 3DES encryption algorithms, MD5 and SHA-1 hashing, and Diffie-Hellman key generation.

Using DES and 3DES algorithms, the VPN module encrypts data at speeds suitable for full duplex T1/E1 serial connections (4 megabits per second for 1518-byte packets). A Cisco 1700 router equipped with a VPN module supports up to 100 encrypted tunnels for concurrent sessions with mobile users or other sites.

New Software Features in Release 12.1(1)

For information regarding the features supported in Cisco IOS Release 12.1, refer to the Cross-Platform Release Notes and New Feature Documentation links at the following location on CCO:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/index.htm

This URL is subject to change without notice. If it changes, point your web browser to CCO, and click on the following path:

Service & Support: Technical Documents: Documentation Home Page: Cisco IOS Software Configuration: Cisco IOS Release 12.1: Cisco IOS Release 12.1

Important Notes

The following sections contain important notes about Cisco IOS Release 12.1 that can apply to the Cisco 1700 series. (Also, see the "Caveats" section.)

Using the boot flash Command

Booting a Cisco 1700 series router with the commands boot flash or boot system flash results in unpredictable behavior. To work around this problem, be sure to enter a colon (:) following both commands (for example, boot flash: or boot system flash:.)

Fan Operation in Cisco 1700 Series Routers

The fans in Cisco 1700 series routers stay off until thermally activated.

Cisco Express Forwarding

When installed in a Cisco 1720 or 1750 router, the Cisco Virtual Private Network (VPN) module does not support Cisco express forwarding (CEF).

Flash defaults to Flash:1 on Multipartition Flash

When using a multipartition flash card, the various flash partitions are referred to as "flash:1:", "flash:2:", etc. If you specify only "flash" in a multipartition flash, the parser assumes "flash:1:." For example, if you enter show flash all the parser defaults to "show flash:1: all" and only the flash information for the first partition displays. To see information for all flash partitions, enter show flash ?. This will list all of the valid partitions. Then enter show flash:xx: all on each valid partition.

Caveats

Caveats describe unexpected behavior or defects in Cisco IOS software releases. For information on caveats in Cisco IOS Release 12.1 T, refer to the Caveats for Cisco IOS Release 12.1 T document. All caveats in Release 12.1 T are also in Release 12.1(1)XC.

For information on caveats in Cisco IOS Release 12.1, refer to the Caveats for Cisco IOS   Release  12.1  document, which lists severity 1 and 2 caveats, and is located on CCO and the Documentation CD-ROM. Severity 1 caveats are the most serious caveats, severity 2 caveats are less serious, and severity 3 caveats are the least serious of these three severity levels.


Note   If you have an account with CCO, you can use Bug Navigator II to find caveats of any severity for any release. You can reach Bug Navigator II on CCO at Software Center: Cisco IOS Software: BUG TOOLKIT: Cisco Bug Navigator II, or at http://www.cisco.com/support/bugtools/bugtool.shtml.

Caveats for Release 12.1(1)XC

This section describes possibly unexpected behavior by Release 12.1(1)XC. Only severity 1 through 3 caveats are included.

Miscellaneous

  When a Cisco 1700 series router is configured with IPSec and L2TP, the command ping fails when the packet size is larger than 1,460 bytes. To work around this problem, do not configure IPSec and L2TP with packet sizes larger than 1,460 bytes.
  When the packet size sent through a Cisco 1700 router is changed from 1,518 bytes to 512 bytes, the following errors occur:
    19:12:38:  pkt LocalAddr :0x50011C00 also marked for error 4615
    19:12:38: c1700_em_rx_error: 1207, id 53, pool offset 0
     
    
  SAs are sometimes used before they are created, causing the following error message:
    C1700_EM-3-CMD_ERR: Encryption Module command returned error: (0x1045 ) 
     
    
  Only one of two tunnels are reestablished after you issue the command no crypto engine accelerator. To work around this problem, use the command no crypto engine accelerator to disable the VPN module and then perform the following steps to correctly bring up all of the encryption tunnels:
  Using IPSec with generic routing encapsulation (GRE) fails on Cisco 1700 routers. The following traceback is displayed:
    00:48:39: %IP-3-DESTHOST: src=16.0.0.1, dst=16.0.0.3, NULL desthost
     -Process= "Crypto HW Proc", ipl= 0, pid= 42
     -Traceback= 80250668 80A10CF0 80A08174 80A08534 80147A08
     
    
  To work around this problem, use process-switching.
  Traffic is process-switched, not fast-switched, when crypto map and PPP are configured on the same interface. All interfaces are affected by this error, not only the interfaces on which crypto map is applied. That is, non-encryption interfaces also fail to perform fast-switching. In addition, if you use PPP, performance might drop because of the use of process-switching.
  With fast-switching and traceback enabled on a VPN interface, sending traffic at very high speeds causes a memory (malloc) failure. To work around this problem, reduce the traffic rate.
  Configuring the command req-qos controlled-load for Resource Reservation Protocol (RSVP) in a voice-over-IP (VoIP) dial peer causes a memory leak, which causes an unexpected router reset.

Related Documentation

The following sections describe the documentation available for the Cisco 1700 series routers. Typically, these documents consist of hardware and software installation guides, Cisco IOS configuration and command references, system error messages, feature modules, and other documents.

Documentation is available as printed manuals or electronic documents, except for feature modules, which are available online on CCO and the Documentation CD-ROM.

Use these release notes with the documents listed in the following sections:

Release-Specific Documents

The following documents are specific to Release 12.1. They are located on CCO and the Documentation CD-ROM:

  To reach these documents from CCO, click on this path (under the heading Service & Support):
  Technical Documents: Product Bulletins
  As a supplement to the caveats listed in the "Caveats" section section in these release notes, see the Caveats for Cisco IOS Release 12.1  and Caveats for Cisco IOS Release 12.1 T   documents, which contain caveats applicable to all platforms for all maintenance releases of Release 12.1.
Technical Documents: Documentation Home Page: Cisco IOS Software Configuration: Cisco IOS Release 12.1: Caveats
Cisco Product Documentation: Cisco IOS Software Configuration: Cisco IOS Release 12.1: Caveats

Note   If you have an account with CCO, you can use Bug Navigator II to find caveats of any severity for any release. You can reach Bug Navigator II on CCO at Software Center: Cisco IOS Software: BUG TOOLKIT: Cisco Bug Navigator II, or at http://www.cisco.com/support/bugtools/bugtool.shtml.

Platform-Specific Documents

Cisco 1720

These documents are available for the Cisco 1720 router on CCO and the Documentation CD-ROM:

On CCO at:

Technical Documents: Documentation Home Page: Access Servers and Access Routers: Modular Access Routers: Cisco 1720 Router

On the Documentation CD-ROM at:

Cisco Product Documentation: Access Servers and Access Routers: Modular Access Routers: Cisco 1720 Router

Cisco 1750

These documents are available for the Cisco 1750 router on CCO and the Documentation CD-ROM:

On CCO at:

Technical Documents: Documentation Home Page: Access Servers and Access Routers: Modular Access Routers: Cisco 1750 Router

On the Documentation CD-ROM at:

Cisco Product Documentation: Access Servers and Access Routers: Modular Access Routers: Cisco 1750 Router

Feature Modules

Feature modules describe new features supported by Release 12.1(1)XC and are updates to the Cisco IOS documentation set. A feature module consists of a brief overview of the feature, benefits, configuration tasks, and a command reference. As updates, the feature modules are available online only. Feature module information is incorporated in the next printing of the Cisco IOS documentation set.

To reach the Release 12.1(1)XC feature modules:

  Technical Documents: Documentation Home Page: Cisco IOS Software Configuration: Cisco IOS Release 12.1: New Feature Documentation: New Features in 12.1-Based Limited Lifetime Releases: New Features in Release 12.1X: New Features in Release 12.1(1)X
  Cisco Product Documentation: Cisco IOS Software Configuration: Cisco IOS Release 12.1: New Feature Documentation: New Features in 12.1-Based Limited Lifetime Releases: New Features in Release 12.1X: New Features in Release 12.1(1)X

Cisco IOS Software Documentation Set

The Cisco IOS software documentation set consists of the Cisco IOS configuration guides, Cisco IOS command references, and several other supporting documents that are shipped with your order in electronic form on the Documentation CD-ROM—unless you specifically ordered printed versions.

Documentation Modules

Each module in the Cisco IOS documentation set consists of two types of books: a configuration guide and a corresponding command reference. Chapters in a configuration guide describe protocols, configuration tasks, Cisco IOS software functionality, and contain comprehensive configuration examples. Chapters in a command reference provide complete command syntax information. Use each configuration guide with its corresponding command reference.

The Cisco IOS software documentation set is available on CCO and on the Documentation CD-ROM.

On CCO at:

Technical Documents: Documentation Home Page: Cisco IOS Software Configuration: Cisco IOS Release 12.1: Configuration Guides and Command References

On the Documentation CD-ROM at:

Cisco Product Documentation: Cisco IOS Software Configuration: Cisco IOS Release 12.1: Configuration Guides and Command References

Release 12.1 Documentation Set

Table 5 describes the contents of the Cisco IOS Release 12.1 software documentation set, which is available in both electronic and printed form.


Note   You can find the most current Cisco IOS documentation on CCO and the Documentation CD-ROM. These electronic documents may contain updates and modifications made after the hard-copy documents were printed.

On CCO at:

Technical Documents: Documentation Home Page: Cisco IOS Software Configuration: Cisco IOS Release 12.1

On the Documentation CD-ROM at:

Cisco Product Documentation: Cisco IOS Software Configuration: Cisco IOS Release 12.1


Table 5: Cisco IOS Software Release 12.1 Documentation Set
Books Chapter Topics

  • Cisco IOS Configuration Fundamentals Configuration Guide

  • Cisco IOS Configuration Fundamentals Command Reference

Configuration Fundamentals Overview

Using the Command-Line Interface (CLI)

Using Configuration Tools

Configuring Operating Characteristics

Managing Connections, Menus, and System Banners

Using the Cisco Web Browser

Using the Cisco IOS File System

Modifying, Downloading, & Maintaining Configuration Files

Loading and Maintaining System Images

Maintaining Router Memory

Rebooting a Router

Configuring Additional File Transfer Functions

Monitoring the Router and Network

Troubleshooting a Router

Performing Basic System Management

System Management Using System Controllers

Web Scaling Using WCCP

Managing Dial Shelves

  • Cisco IOS Apollo Domain, Banyan VINES, DECnet, ISO CLNS, and XNS Configuration Guide

  • Cisco IOS Apollo Domain, Banyan VINES, DECnet, ISO CLNS, and XNS Command Reference

Overview of Apollo Domain, Banyan VINES, DECNET, ISO
CLNS, and XNS

Configuring Apollo Domain

Configuring Banyan VINES

Configuring DECnet

Configuring IOS CLNS

Configuring XNS

  • Cisco IOS AppleTalk and Novell IPX Configuration Guide

  • Cisco AppleTalk and Novell IPX Command Reference

AppleTalk and Novel IPX Overview

Configuring AppleTalk

Configuring Novell IPX

  • Cisco IOS Bridging and IBM Networking Configuration Guide

  • Cisco IOS Bridging and IBM Networking Command Reference, Volume I

  • Cisco Bridging and IBM Networking Command Reference, Volume II

Overview of SNA Internetworking

Overview of Bridging

Configuring Transparent Bridging

Configuring Source-Route Bridging

Configuring Token Ring Inter-Switch Link

Configuring Token Ring Route Switch Module

Overview of IBM Networking

Configuring Remote Source-Route Bridging

Configuring Data-Link Switching Plus+

Configuring Serial Tunnel and Block Serial Tunnel

Configuring LLC2 and SDLC Parameters

Configuring IBM Network Media Translation

Configuring Frame Relay Access Support

Configuring NCIA Server

Configuring the Airline Product Set

Configuring DSPU and SNA Service Point Support

Configuring SNA Switching Services

Configuring Cisco Transaction Connection

Configuring Cisco Mainframe Channel Connection Adapters

Configuring CLAW and TCP/IP Offload Support

Configuring CMPC and CSNA

Configuring CMPC+

Configuring the TN3270 Server

  • Cisco IOS Dial Services Configuration Guide: Terminal Services

  • Cisco IOS Dial Services Configuration Guide: Network Services

  • Cisco IOS Dial Services Command Reference

Large-Scale Dial Solutions

Cost-Control Solutions

Virtual Private Networks

X.25 on ISDN Solutions

Telco Solutions

Dial-Related Addressing Services

Internetworking Dial Access Scenarios

Preparing for Dial Access

Modem Configuration and Management

ISDN and Signalling Configuration

PPP Configuration

Dial-on-Demand Routing Configuration

Dial-Backup Configuration

Terminal Service Configuration

  • Cisco IOS Interface Configuration Guide

  • Cisco IOS Interface Command Guide

Interface Configuration Overview

Configuring LAN Interfaces

Configuring Serial Interfaces

Configuring Logical Interfaces

  • Cisco IOS IP and IP Routing Configuration Guide

  • Cisco IOS IP and IP Routing Command Reference

IP Overview

Configuring IP Addressing

Configuring DHCP

Configuring IP Services

Configuring Mobile IP

Configuring On-Demand Routing

Configuring RIP

Configuring IGRP

Configuring OSPF

Configuring IP Enhanced IGRP

Configuring Integrated IS-IS

Configuring BGP

Configuring Multicast BGP (MBGP)

Configuring IP Routing Protocol-Independent Features

Configuring IP Multicast Routing

Configuring Multicast Source Discovery Protocol

Configuring PGM Router Assist

Configuring Unidirectional Link Routing

Using IP Multicast Tools

  • Cisco IOS Multiservice Applications Configuration Guide

  • Cisco IOS Multiservice Applications Command Reference

Multiservice Applications Overview

Configuring Voice over IP

Configuring Gatekeepers (Multimedia Conference Manager)

Configuring Voice over Frame Relay

Configuring Voice over ATM

Configuring Voice over HDLC

Configuring Voice-Related Support Features

Configuring PBX Signaling

Configuring Store and Forward Fax

Configuring Video Support

Configuring Head-End Broadband Access Router Features

Configuring Subscriber-End Broadband Access Router
Features

Configuring Synchronized Clocking

  • Cisco Quality of Service Solutions Configuration Guide

  • Cisco IOS Quality of Service Solutions Command Reference

Quality of Service Overview

Classification Overview

Configuring Policy-Based Routing

Configuring QoS Policy Propagation via Border Gateway
Protocol

Configuring Committed Access Rate

Congestion Management Overview

Configured Weighted Fair Queueing

Configuring Custom Queueing

Configuring Priority Queueing

Congestion Avoidance Overview

Configuring Weighted Random Early Detection

Policing and Shaping Overview

(Continued)

  • Cisco Quality of Service Solutions Configuration Guide

  • Cisco IOS Quality of Service Solutions Command Reference

Configuring Generic Traffic Shaping

Configuring Frame Relay and Frame Relay Traffic Shaping

Signalling Overview

Configuring RSVP

Configuring Subnetwork Bandwidth Manager

Configuring RSVP-ATM Quality of Service Internetworking

Link Efficiency Mechanisms Overview

Configuring Link Fragmentation and Interleaving for Multilink
PPP

Configuring Compressed Real-Time Protocol

IP to ATM CoS Overview

Configuring IP to ATM CoS

QoS Features for Voice Introduction

  • Cisco IOS Security Configuration Guide

  • Cisco IOS Security Command Reference

Security Overview

AAA Overview

Configuring Authentication

Configuring Authorization

Configuring Accounting

Configuring RADIUS

Configuring TACACS+

Configuring Kerberos

Radius Commands

TACACS+ Commands

Access Control Lists: Overview and Guidelines

Cisco Secure Integrated Software Firewall Overview

Configuring Lock-and-Key Security (Dynamic Access Lists)

Configuring IP Session Filtering (Reflexive Access Lists)

Configuring TCP Intercept (Prevent Denial-of-Service Attacks)

Configuring Context-Based Access Control

Configuring Cisco Secure Integrated Software Intrusion
Detection System

Configuring Authentication Proxy

Configuring Port to Application Mapping

IP Security and Encryption Overview

Configuring IPSec Network Security

Configuring Certification Authority Interoperability

Configuring Internet Key Exchange Security Protocol

Configuring Passwords and Privileges

Neighbor Router Authentication: Overview and Guidelines

Configuring IP Security Options

  • Cisco IOS Switching Services Configuration Guide

  • Cisco IOS Switching Services Command Reference

Cisco IOS Switching Services Overview

Switching Paths Overview

Configuring Switching Paths

Cisco Express Forwarding Overview

Configuring Cisco Express Forwarding

NetFlow Switching Overview

Configuring NetFlow Switching

MPLS Overview

(Continued)

  • Cisco IOS Switching Services Configuration Guide

  • Cisco IOS Switching Services Command Reference

Configuring MPLS

Configuring IP Multilayer Switching

Configuring IP Multicast Multilayer Switching

Configuring IPX Multilayer Switching

Configuring Multicast Distributed Switching

Routing Between VLANs Overview

Configuring Routing Between VLANs with ISL Encapsulation

Configuring Routing Between VLANs with IEEE 802.10
Encapsulation

Configuring Routing Between VLANs with IEEE 802.1Q Encapsulation

LAN Emulation Overview

Configuring LAN Emulation

Configuring Token Ring LANE

MPOA Overview

Configuring the MPOA Client

Configuring the MPOA Server

Configuring Token Ring LANE for MPOA

  • Cisco IOS Wide-Area Networking Configuration Guide

  • Cisco IOS Wide-Area Networking Command Reference

Wide-Area Networking Overview

Configuring ATM

Frame Relay

Frame Relay-ATM Internetworking

Configuring SMDS

Configuring X.25 and LAPB

  • Cisco IOS Configuration Guide Master Index

  • Cisco IOS Command Reference Master Index

  • Cisco IOS Command Summary

  • Cisco IOS Debug Command Reference

  • Cisco IOS Dial Services Quick Configuration Guide

  • Cisco IOS New Features Index
    (CCO and Documentation CD only)

  • Cisco IOS System Error Messages


Note   Cisco Management Information Base (MIB) User Quick Reference is no longer published. If you have an account with CCO, you can find latest list of MIBs supported by Cisco. To reach the Cisco Network Management Toolkit, press Login at CCO and go to Software Center: Network Mgmt Products: Cisco Network Management Toolkit.

Obtaining Documentation

World Wide Web

You can access the most current Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.

Documentation CD-ROM

Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM is updated monthly. Therefore, it is probably more current than printed documentation. The CD-ROM package is available as a single unit or as an annual subscription.

Ordering Documentation

Registered CCO users can order the Documentation CD-ROM and other Cisco Product documentation through our online Subscription Services at http://www.cisco.com/cgi-bin/subcat/kaojump.cgi.

Nonregistered CCO users can order documentation through a local account representative by calling Cisco's corporate headquarters (California, USA) at 408 526-4000 or, in North America, call 800 553-NETS (6387).

Obtaining Technical Assistance

Cisco provides Cisco Connection Online (CCO) as a starting point for all technical assistance. Warranty or maintenance contract customers can use the Technical Assistance Center. All customers can submit technical feedback on Cisco documentation using the web, e-mail, a self-addressed stamped response card included in many printed docs, or by sending mail to Cisco.

Cisco Connection Online

Cisco continues to revolutionize how business is done on the Internet. Cisco Connection Online is the foundation of a suite of interactive, networked services that provides immediate, open access to Cisco information and resources at anytime, from anywhere in the world. This highly integrated Internet application is a powerful, easy-to-use tool for doing business with Cisco.

The CCO broad range of features and services helps customers and partners to streamline business processes and improve productivity. Through CCO, you will find information about Cisco and our networking solutions, services, and programs. In addition, you can resolve technical issues with online support services, download and test software packages, and order Cisco learning materials and merchandise. Valuable online skill assessment, training, and certification programs are also available.

Customers and partners can self-register on CCO to obtain additional personalized information and services. Registered users may order products, check on the status of an order and view benefits specific to their relationships with Cisco.

You can access CCO in the following ways:

You can e-mail questions about using CCO to cco-team@cisco.com.

Technical Assistance Center

The Cisco Technical Assistance Center (TAC) is available to warranty or maintenance contract customers who need technical assistance with a Cisco product that is under warranty or covered by a maintenance contract.

To display the TAC web site that includes links to technical support information and software upgrades and for requesting TAC support, use www.cisco.com/techsupport.

To contact by e-mail, use one of the following:

Language
E-mail Address

English

tac@cisco.com

Hanzi (Chinese)

chinese-tac@cisco.com

Kanji (Japanese)

japan-tac@cisco.com

Hangul (Korean)

korea-tac@cisco.com

Spanish

tac@cisco.com

Thai

thai-tac@cisco.com

In North America, TAC can be reached at 800 553-2447 or 408 526-7209. For other telephone numbers and TAC e-mail addresses worldwide, consult the following web site: http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml.

Configuration Tips on the Cisco Technical Assistance Center Home Page

If you have a CCO login account, you can access the following URL, which contains links and software tips on configuring your Cisco products:

http://www.cisco.com/kobayashi/technotes/serv_tips.shtml

This URL is subject to change without notice. If it changes, point your Web browser to CCO, log in, and click on this path: Technical Assistance Center:Technical Tips.

The following sections are provided from the Technical Tips page:

Documentation Feedback

We appreciate and value your comments:

  Cisco Systems, Inc.
Document Resource Connection
170 West Tasman Drive
San Jose, CA 95134-9883





hometocprevnextglossaryfeedbacksearchhelp
Posted: Tue Sep 19 16:06:12 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.